Our 1 Series cable assembly lineup features heat-resistant types that can be used in a wide continuous operating temperature range (-65 to +125°C) in microwave measurement environments, alongside durability-focused types with a dramatically improved mechanical life based on a cabling structure cultivated through developing robot cables.

• Outstanding stability
• Fast switching speed
• Ripple-free response over standard waveguide bands

The NC5000A Series AWGN noise sources feature outstanding stability, switching speed, and ripple-free response over standard waveguide bands. The high stability of the NC5000A Series allows these units to be used in place of cumbersome gas tube noise sources.

Ripple in the output of noise sources has a direct effect on measurement accuracy, so Noisecom has tailored the response of the NC5000A Series so that ripple is minimized throughout the specified frequency range.

• Low Noise
• Excellent line/load regulation
• Remote sense
• Coarse and fine voltage controls
• Constant voltage or constant current operation with automatic crossover and mode indication
• Individual On/Off switch per output (not including fixed output)
• Variable ( 1.5V to 5V ) Auxiliary Output
• Shrouded socket-compatible with bare wire and shrouded safety plug connections up to 4 mm

• Designed for machine vision applications that require broad illumination over a wide area with controlled fall off.
• This BALA (Broad Area Linear Array) bar light series is expandable in 1″ increments up to 82″.
• Applications requiring an even wider area of illumination can utilize two BALA bar lights aligned in parallel, facing each other.
• AL150 derivatives include AL4424 (4″), AL4554 (9″) and AL46120 (20″) (which represent legacy part numbers)

The FX2 is the edge-lit flat diffuse light built for reflective surface inspection.

Unlike back-lit diffuse designs, the FX2 positions its LEDs in the frame rather than behind the emitting window. This side-lit geometry allows for a thin housing and a scalable planar design with uniform output at longer working distances.

The FX2 is available in sizes from 50 mm x 50 mm up to 600 mm x 600 mm in 25 mm increments. It is offered in 11 wavelengths, with optional polarization to help reduce glare on reflective surfaces, and can be specified with a central viewport for select front lighting applications.

• Easy separation of cable jackets from the electrical conductor
• Suitable for samples with a high strip force
• Also designed for larger sample outer diameters (depending on wall thickness)
• Suitable preparation before cutting cable samples for measuring (e.g. with the ORC-series)
• Robust, stable construction
• Easy to use

• DC - 200 kHz bandwidth DC
• MHz (small signal -3 dB)
• Output voltage ±75 Vpk
• Rise / fall time 100 V/µs
• USB interface standard, LAN optional
• Analog control input 0 ... ±10 V for control of voltage and current
• Monitor outputs for measured voltage and current values (not all models)
• Modularly extensible via master-slave mode
• Parallel and Series Connections for two or more units

• All Digital IF technology
• 10.1” WVGA (1024 x 600) Display
• Frequency range from 9 KHz up to 3.2 GHz
• -161 dBm/Hz Displayed Average Noise Level (Typ)
• -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
• Total Amplitude Accuracy < 0.7 dB
• 1 Hz Minimum Resolution Bandwidth (RBW)
• Comes with Preamplifier

• Universal input switching supply 
• 24v regulated current DC – runs on 110-220v AC 
• Power indicator light 
• Tinned leads; marked negative/positive with wire nuts for easy connection