-
Our White High Intensity Linear Backlights offer 540 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
-
Available in white only. For additional wavelengths please refer to our BL138 series.
Junkosha - 2 Series cables - Extra Flexibility and Durability
Our 2 Series cable assembly showcases excellent phase stability against bending, developed with microwave/mmWave measurement environments in mind.
Its flexibility means low repulsion, reducing the load on the measured object
|
Cable Type |
Maximum Usable Frequencies |
Standard Insertion Loss (dB/m) |
Outer Cable Diameter (mm) |
Cable Weight (g/m) |
Continuous Operating Temperature Range (°C) |
Assembly Length (mm) |
Notes |
||
|---|---|---|---|---|---|---|---|---|---|
|
18.5GHz |
Maximum Frequency |
Minimum |
Maximum |
||||||
|
MWX221 |
26.5 GHz |
1.2 |
1.4 |
6 |
64 |
-30~+85 |
200 |
5000 |
Standard Catalog Product |
|
MWX221 Armored Type |
12.5 |
212 |
700 |
5000 |
Standard Catalog Product |
||||
|
MWX241 Armored Type |
40.0 GHz |
1.8 |
3 |
9.5 |
137 |
700 |
5000 |
Standard Catalog Product |
|
|
MWX241 Non-Armored Type |
4.1 |
35 |
200 |
5000 |
Made to Spec |
||||
|
MWX251 Armored Type |
50.0 GHz |
2.1 |
3.8 |
9.5 |
129 |
700 |
1500 |
Standard Catalog Product |
|
|
MWX251 Non-Armored Type |
3.7 |
29 |
200 |
1500 |
Made to Spec |
||||
|
MWX261 Armored Type |
67.0 GHz |
2.9 |
5.6 |
7.7 |
90 |
700 |
1500 |
Standard Catalog Product |
|
|
MWX261 Non-Armored Type |
2.6 |
17 |
200 |
1500 |
Made to Spec |
||||
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- Excellent flexibility and phase stability against bending
- We also have an extensive lineup of connectors
- Select an armored type for reduced external mechanical damage
Use
- For mmWave/microwave band measurement
- For measurement of minute devices for which flexibility is required
Flexibility Data
A test cable measuring 1,000 mm in length was formed into a circle with an internal diameter of 300mm. Both ends were overlapped and secured with tape measuring 50 mm in width. The circularly formed test cable was then suspended, with the overlapping end section at the top and a weight positioned at the bottom. Circularity was measured after five seconds. (Circularity is expressed as the ratio a/b.)
Document
More Product Information
The SPARTE 700 series is a top-tier dual-axis antenna that boasts dish sizes ranging from 20 to 24 feet.
Its high gain and large aperture make it the ideal choice for tracking any flying target, such as aircraft of launch vehicle. This antenna series features a rock-solid design that guarantees peak performance under all conditions: an aluminum alloy reflector that enhances surface precision, SCM tracking feeds for trustworthy and accurate tracking, and dual-drive motors for redundancy and backlash prevention.
Furthermore, for applications that demand the utmost in performance, the SPARTE 700 series is also available in skid-mounted and trailer transportable and 3-axis gyro-stabilized versions.
Coaxial cable assembly suitable for fixed wiring inside and between equipment used in the microwave band up to 100GHz (continuous operating temperature range: -30 to +85°C).
These cables have excellent formability (shape-retention capability) that make wiring work easy and exhibit superior loss characteristics compared to semi-rigid cables. Standard connectors are SMA (m) straight connectors, although other connectors can be used as required.
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
- The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design.
- When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel.
- Provides an intensity level of 53kLux (working distance of 75mm).
- Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m).
- Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
- The Wide Linear Diffuse Light series is ideal for the inspection of elongated or cylindrical objects.
- Perfect for inspections requiring a multi-camera setup.
- Can be provided with up to 4 viewing ports.
- Expandable lengths from 6” – 36” (152 – 194mm) in 6” increments.
The SM7000 Series microwave switching modules are members of the VXI Technology SMIPII™ family. They offer a modular design allowing custom switching configurations to be easily assembled and modified in the field.
The SM7000 is a single-wide, C-size VXI module, which can support up to six different microwave switches including: a dual SPDT; SP3T through SP6T; transfer switches and passthrough adapters that allow the module to control up to eight externally mounted relays each.
- Support the most high-performance Camera Link cameras with available support for Full and 80-bit mode at up to 85 MHz
- Perform deterministic image acquisition by way of the jitter-free Camera Link 2.1 interface
- Maximize system compatibility with the choice of PCIe® 2.1 x1, x4 or x8 connectivity
- Eliminate missed frames with ample onboard buffering and PCIe bandwidth
- Optimize multi-camera applications via support for up to four Base or two Full/80-bit Camera Link cameras per board
- Minimize space requirements and maximize PC compatibility through a half-length design with mini Camera Link connectivity for true single-slot operation
- Improve and simplify system connectivity with Power-overCamera-Link (PoCL) support at extended cable lengths
Signal Generations, Arbitrary Waveform generation and Digital to Analog output modules for providing signal simulation capability
Junkosha, Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177
Test & Measurement
Download Line Card
