AVT - Bonito PRO X-2620B NIR 26.2 Megapixel CMOS camera for wide temperature ranges - CoaXPress
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
The Bonito PRO is Allied Vision’s brand new high-bandwidth camera series with a CoaXPress interface. Equipped with four DIN 1.0/2.3 connectors the camera is capable to transmit 25 Gbps via quad CXP-6 (6.25 Gbps) high-speed connections. The Bonito PRO features a rugged, fan-less housing design and its powerful feature set make this camera an ideal choice for high-definition imaging applications demanding high-throughput, robustness, and system design-in flexibility. By default, NIR models ship with no optical filter.
See the Modular Concept for lens mount and optical filters options. See the Customization and OEM Solutions webpage for additional options.
Specifications
Interface
CoaXPress (CXP-6) 4 DIN
Resolution
5120 (H) × 5120 (V)
Sensor
ON Semi PYTHON 25K NIR
Sensor type
CMOS
Sensor size
Type APS-H
Pixel size
4.5 µm × 4.5 µm
Shutter mode
Global shutter
Lens mounts (available)
F-Mount, F-Mount PA, EF-Mount PA, M42-Mount, M42-Mount PA, M58-Mount, M58-Mount PA
Max. frame rate at full resolution
79.7 fps
ADC
10 Bit
Non-volatile memory (Flash)
1024 KB
Imaging performance
Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for NIR models measured without optical filter.
Quantum efficiency at 529 nm
55 %
Quantum efficiency at 850 nm
34 %
Temporal dark noise
20.7 eˉ
Saturation capacity
8100 eˉ
Dynamic range
51.6 dB
Absolute sensitivity threshold
21.4 eˉ
Output
Bit depth
10 Bit
Monochrome pixel formats
Mono8, Mono10
Operating conditions/dimensions
Operating temperature
-20 °C to +70 °C housing (without condensation)
Power requirements (DC)
24 VDC; PoCXP
Power consumption
External power: 15 W at 24 VDC | Power over CoaXPress: 15 W
Mass
500 g (with F-Mount)
Body dimensions (L × W × H in mm)
114.9 × 70 × 70 (with F-Mount and connectors)
Regulations
CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class B; CAN ICES-3 (B)
Features
Image optimization features:
- Auto gain (manual gain control: 0 to 22 dB)
- Auto exposure (manual exposure control: 1 µs to 1 s)
- Binning (horizontal and/or vertical), (sum or average)
- Decimation X/Y
- Gamma correction
- Look-up tables
- Defect Pixel Correction
- Fixed Pattern Noise Correction
Camera control features:
- Multiple region of interest
- Sequencer Control
- Trigger over CoaXPress
- EF lens control (order option -18)
- Storable user sets
- Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
- Temperature monitoring (main board and sensor board)
Applications
Bonito PRO X-2620B NIR is ideal for a wide range of applications including:
- Automated Optical Inspection of flat panel displays, PCB/electronics, printings
- 2D/3D Surface Inspection (for example, glass)
- Aerial imaging
Quantum efficiency
Document
Document
Document
Document
Document
Document
Document
Technical papers, knowledge base
3D CAD files (STEP)
Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/
More Product Information
- Provides a passive PCIe® backplane for test applications
- Self-contained, portable and self-powered
- Supplies power for +3.3V, +3.3Vaux and +12V rails
- Generates PCIe reference clock
- Accepts external clock inputs
- Generates valid PERST# bus reset that can be activated by manual push button
- Includes two mid-bus probe footprints for traffic monitoring
- Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)
- Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card
- Supports data rates of 2.5 GT/s and 5.0 GT/s
AR’s microwave amplifiers are just as tough and dependable as our RF amplifiers, and they are backed by the same comprehensive warranty. Our microwave amplifiers offer the hard-to-find combinations of power and bandwidth in frequency increments and power output you need for today’s test applications.
-
Combined eye-pieces and CCD camera mount
-
3x zoom and quick lens exchange
-
Engraved guides on mmW platen
-
Supports broadband, load pull, coax RF and banded waveguide configuration
-
Rock-solid mechanical design
-
Submicron stage accuracy
See more Key Features on Specifications & Details tab
-
Probe loss is 3 dB typical between 140 and 200 GHz, S11/S22 15 dB typical
-
Reduced unwanted couplings and transmission modes
-
Able to shrink pad geometries to 25 x 35 µm (best case)
-
Typical contact resistance < 0.05 Ω on Al, < 0.02 Ω on Au
-
WR15, WR12, WR10, WR8, WR6, WR4, WR3, and WR2 bands available.
-
Probe station
-
Keysight Streamline Vector Network Analyzer (option up to 53 GHz)
-
Choice of probes
-
Known measurement accuracy traced back to independent standards
-
Uses best measurement practices for optimized measurements
-
Best in class RF and Microwave performance
-
Small benchtop footprint
See more Key Features on Specifications & Details tab
Whether you’re seeking to improve an existing R&D or manufacturing process, add to that process capacity, or prepare for an entirely new product or process, our extensive machine and equipment control systems experience will assure that leading edge design, smooth integration and cost-effective process automation solutions are delivered.
-
High efficiency: up to 81.6%,
-
low no load power consumption <95mW,
-
meets DoE efficiency level VI,
-
CoC version 5 Tier 2,
-
ultra-low leakage current ≤10μA,
-
IEC 60601-1-2, 4th edition ready,
-
wide operating temperature range 0 - 45°C,
-
isolation 2x MOPP,
-
double housing safety: snapped & welded,
-
IP42 approved interchangeable plug system as additional accessories,
-
IEC 60601-1-11 ready with IPX2 adapter
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT2450) and color (GT2450C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
AR0521 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-500m) and color (1800 U-500c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
Download Line Card
Document
