VTI Instruments - SMX-6xxx series of High Density Non-blocking RF Multiplexers
The SMX-6xxx product family includes the SMX-6101 (pictured), SMX-6103, SMX-6106, SMX-6111, SMX-6115, SMX-6116, and SMX-6144.
The VTI SMX-6xxx Series of high density non-blocking RF multiplexers deliver exceptional performance and reliability in a compact single-slot configuration. Front panel connectivity is available in both SMB and PKZ formats to integrate seamlessly into new or existing test systems. Embedded virtual schematic control further simplifies setup and debugging allowing all relays to be engaged independent of application software and device drivers.
The SMX-6xxx Series delivers unmatched bandwidth and isolation performance resulting in exceptional measurement integrity that is ideal for the most demanding aerospace, defense and automotive automated test equipment (ATE) applications.
|
SMX-6101 |
(10) 1X4 COAX MUXES |
|---|---|
|
SMX-6101-SMB |
(10) 1X4 COAX MUXES |
|
SMX-6103 |
(1) 1X32 COAX MUX |
|
SMX-6103-SMB |
(1) 1X32 COAX MUX |
|
SMX-6105 |
(4) 1X8 COAX MUXES |
|
SMX-6105-SMB |
(4) 1X8 COAX MUXES |
|
SMX-6106 |
(2) 1X16 COAX MUXES |
|
SMX-6106-SMB |
(2) 1X16 COAX MUXES |
|
SMX-6111 |
(5) 1X4 COAX MUXES |
|
SMX-6111-SMB |
(5) 1X4 COAX MUXES |
|
SMX-6115 |
(2) 1X8 COAX MUXES |
|
SMX-6115-SMB |
(2) 1X8 COAX MUXES |
|
SMX-6116 |
(1) 1X16 COAX MUXES |
|
SMX-6116-SMB |
(1) 1X16 COAX MUXES |
|
SMX-6144 |
(1) 4X4 COAX MATRIX |
|
SMX-6144-SMB |
(1) 4X4 COAX MATRIX |
More Product Information
VXI Chassis include 6-slot VXIbus mainframes (CT-100C), 5-slot VXIbus mainframes (CT-310A), and modular 13-slot VXIbus mainframes (CT-400, pictured).
The LXI mainframes family includes 2-slot, half-rack LXI switching and data acquisition mainframes (EX1202/EX1262), 16-slot, 3U LXI switching and data acquisition mainframes (EX1208A and EX1208B, pictured), and 6-slot, 1U LXI switching and data acquisition mainframes (EX1206A).
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
High density switch matrix models in 1 wire and 2 wire configurations
Signal Generations, Arbitrary Waveform generation and Digital to Analog output modules for providing signal simulation capability
- Eight channel, universal, 2-/4-wire RTD simulator
- Fast, monotonic, glitch-free resistance value programming
- Suitable for simulating resistors, platinum/copper/nickel RTDs
- Suitable for pulsed and continuous excitation inputs
- Direct temperature value programming
- Extensive triggering capability
- Synchronize level changes with input measurements to facilitate test sequencing
- 96 digital lines configurable as either input or output
- Five available power supply rails for custom designs
- Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
- VXI plug&play driver simplifies software development
- On-board connector header for simplified migration to PCB implementation
- Access to 16 MHz clock for use in complex designs
- Multiple front panel connector options
- 4-Channel, 204.8 Ksa/s per channel, 24-Bit DACs
- -115 dB spurious free dynamic range
- Integrated 2-Channel 64-bit tachometer
- Integrated 4-Channel DIO
- Tight synchronization with DSA analyzers
- Ideal for rotational measurement, and stimulus-response applications such as vibration test
- Output modes including Sine, Burst Sine, Chirp, Burst-random and continuous random
The award winning VXI Modular Instrumentation Platform (VMIP™) provides customers with a level of modularity for instruments that is unmatched in the industry. The VMIP™ makes a single VXIbus card slot three times more powerful than single device solutions. Each VMIP™ instrument can be mixed and matched with other VMIP™ devices for added flexibility.
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
