Safran DSI - SPARTE 500 Tracking Telemetry Antenna from 15 to 18 ft
- Up to 96 differential channels per full rack mainframe
- Constantly monitor input signals for fault conditions
- Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
- Inputs can be masked, inverted, and combined to produce interrupts
- Can be used as a time stamp module and as a digital I/O
- Programmable debounce circuitry prevents erroneous readings
- 10 V and 100 V input ranges
- On-board memory stores events with IEEE 1588 timestamps
- Synchronize reading of input states with other scanned analog channels
The EX1200-7416 has sixteen true differential channels of analog comparator input that can be selected to provide an interrupt to the EX1200 system when the input falls outside the software programmed bounds, independent of the scan list operation. The EX1200-7416 is an ideal device in “go/no-go” testing, where a device fails if the voltage outputs exceed a threshold or window, or in control applications where a device or test needs to be shut down if a voltage level is exceeded. Using an analog comparator/interrupter in certain applications, as opposed to a traditional scanning approach, considerably improves the overall response time of the system, providing the ability to ‘constantly monitor’ signals of interest for fault conditions.
The inputs are independently software programmable, permitting the user to vary input thresholds per channel. Each input signal is also digitally debounced for a programmed time ranging from 1 μs to 500 ms, preventing input signal noise from causing undesired interrupts. The threshold polarity can be programmed to detect either a rising or falling edge or can be masked to prevent unused channels from causing interrupts. All of the enabled inputs are OR’d together to produce a single interrupt signal. Input can be combined via math functions to create virtual channels when multiple conditions must be satisfied before an event is recorded. On board memory stores events with precise IEEE 1588 timestamps. The interrupt signal can be routed through the front panel connector for distribution to other devices in the test system for absolute deterministic communication.
There are three modes of operation that satisfy a wide range of applications. In normal mode, any channel crossing a threshold with the programmed polarity will cause an event to be latched into memory. Window mode automatically parallels two adjacent input channels and is used when an input signal is expected to be within upper and lower bounds. Pulse mode provides a means for measuring the pulse width of input signals by automatically changing the threshold polarity at each crossing.
More Product Information
Safran Ground Station is a turnkey ground segment solution with all required equipment and ground tools to proceed with removable media preparation and post-mission data retrieval and replay.
Key components are:
- Rugged Heavy duty Laptop PC for military environment
- RMM (Removable Memory Module) Docking Stations capable of reading up to 4 cartridges simultaneously, especially useful for mass debriefing.
- Ground software suite (RMM Manager, eZ Viewer, MUST), very intuitive and user-friendly interface, for replay and exploitation of data while allowing customizable configuration of the display for mission debriefing.
- Ruggedized Trolley Suitcase specifically adapted for the transport of the whole Ground Station.
This ground station, tested and approved by Safran before delivery, helps to accelerate the deployment on every integration Labs, Air Bases, and can be safely transported between different locations and environments
Acquire high quality images with accurate radiometry for LEO (Low Earth Observation) earth observation applications with 65 MP focal plane and control electronics. From a 500 km orbit, SEEING™ 230 Ident has 9 x 6 km2 swath, offering a 1.03m native Ground Sample Distance (GSD), and features a super-resolution optional mode providing 70cm GSD. Thanks to its unique design, SEEING™ 230 Ident has an ultra-low SWaP factor. It is made of advanced ceramic material for strength during launch and stability during operation in space. It is athermalized and gradient insensitive between -10°C to +50°C. It has a low mass, below 8kg, saving both platform and launch costs.
COMTRACK stands as the preferred choice for over 100 trusted telemetry tracking operators.
Its track record spans various applications, from military aircraft and helicopters to commercial aircraft and even launch vehicles. COMTRACK steps in where larger, space-consuming parabolic systems may not be the best fit.
With its compact, rugged design, this embedded phased array auto-tracking antenna excels at providing reliable telemetry reception across L, S, or C-bands, covering the entire sky up to 93 miles away. Its intelligent integration combines high-elevation reception with long-range capabilities, all within a protective radome.
Additionally, it enables dual-band installations to support systems operating in both current and future frequency ranges. When it comes to trust, simplicity, and performance, COMTRACK takes the lead.
The Mission Recorder Cockpit Remote Control Unit is mounted in a cockpit dashboard and connect to a recorder system. The MCRCR shows status information on the NVG compatible display and can remote control the Mission Recorder System.
The ENERTEC™ mission data processing and distribution units are dependable, cost-effective solutions designed to facilitate field and mission data handling, processing, storage, analysis, and distribution. These units are compatible with both manned and unmanned ground, air, and sea vehicles, offering a dependable resource. Each unit undergoes rigorous testing and validation, adhering to industry-standard testing procedures such as DO-160 and MIL-STD-810.
The SPARTE 700 series is a top-tier dual-axis antenna that boasts dish sizes ranging from 20 to 24 feet.
Its high gain and large aperture make it the ideal choice for tracking any flying target, such as aircraft of launch vehicle. This antenna series features a rock-solid design that guarantees peak performance under all conditions: an aluminum alloy reflector that enhances surface precision, SCM tracking feeds for trustworthy and accurate tracking, and dual-drive motors for redundancy and backlash prevention.
Furthermore, for applications that demand the utmost in performance, the SPARTE 700 series is also available in skid-mounted and trailer transportable and 3-axis gyro-stabilized versions.
The Mobile Telemetry Rack (MTR) integrates state-of-the-art telemetry capabilities utilizing the RTR-X4 & GMDR recorder providing the ideal portable telemetry checkout system, able to receive demodulation, record, process and display your data throughout your system development.
Based on the Cortex architecture, the 4U chassis-based CORTEX RTR-X4 can support up to four channels providing the utmost flexibility and capability a Telemetry Receiver can achieve.
The GMDR Chapter 7 recorder fits particularly well for the flight test support where operability and flexibility is essential. Not only the does the Telemetry rack provide a rich set of features, the Dell Server comes with the standard Safran software tools you expect: D4 Recorder, C10 Extract, eZ Viewer Data Verification and Quick Look Software.
Additionally, multiple projects can be supported by just swapping out the OS & media drives in support of classified projects.
Enhance the reliability of your test data with EagleLink, designed specifically for aircraft and UAVs. EagleLink is crucial for preventing data loss that can delay missions and increase costs, making a dependable transmitter essential.
EagleLink exemplifies technological excellence, tailored for the stringent demands of aviation operations. Its cutting-edge SDR (Software-Defined Radio) architecture and SoC (System on Chip) integration offer superior adaptability for modulation and data preprocessing, ensuring readiness for future advancements.
The integration process is simple and efficient, facilitating quick deployment. EagleLink is compatible with standard PCM inputs or Ethernet for telemetry, adhering to IRIG-106 Chapter 7-2015 standards.
Opt for EagleLink for secure, reliable mission support and optimized resource management.
The LEGION 400 tackles the new challenges of the space industry, offering enhanced connectivity, faster delivery, improved value, and unrivaled flexibility.
This antenna system is designed to meet the demands of Earth Observation satellite tracking and the high-volume needs of Communication Satellite Constellations.
What sets the LEGION 400 apart is its patented tri-band S/X/Ka concentric feed paired with a sleek and ultra-precise pedestal. It’s equipped to support LEOP & Launch Vehicles with its cutting-edge S-band Single Channel Monopulse auto track feed.
The MDR system is your key to data collection in challenging, real-world airborne flight test scenarios. Its modular design allows it to seamlessly adapt to the full spectrum of test requirements, whether it’s a lightweight task or an extensive mission with diverse signals, environmental challenges, and lengthy recording periods.
A comprehensive range of signal interface modules, custom-tailored for various data sources and bus types, ensures that it’s ready to meet today’s demands and future requirements.
Safran DSI
Safran Defense & Space, Inc. (Safran DSI) is a leading provider of cutting-edge solutions designed to address the evolving challenges of national defense and advanced space missions. Headquartered in Arlington, Virginia, Safran DSI operates through specialized business units in Optronics, Space Solutions, Testing & Telemetry, Geospatial Artificial Intelligence (AI), and Assured Positioning, Navigation, and Timing (PNT).
