MVG - EMC Test Chambers - EMC-3 Anechoic Chamber 30 MHz - 18000 MHz
A Semi Anechoic EMC Chamber with 3-meter test range ensuring EMC compliance for Emission and Immunity testing. Ferrite and hybrid pyramidal EMC absorbers are combined in a unique pattern within a SmartShield high performance chamber. Operating at a 3m test distance, this chamber is compliant to ANSI C63.4/CISPR-16-1-4 with a Test Volume diameter of 1 to 2 meters.
|
Key Features |
|---|
|
EMC Chamber Dimensions (Internal shield) 8.9 m x 5.6 m x 5.8 m |
|
EMC compliance testing Emission Performance - CISPR 16-1-4/ANSI C63.4 - NSA 30 MHz -1 GHz +/-4 dB or better @3m - Test Volume 1.5x2.0m (DxH) |
|
EMC compliance testing Emission Performance - CISPR 16-1-4, sVSWR - 1 GHz - 18 GHz @3m sVSWR < 6dB 1.5x2.0m(DxH) |
|
EMC compliance testing Immunity Performance - IEC 61000-4-3 80MHz -18GHz UFA 1.5x1.5m @3m 0 +6dB |
|
Extended performance options – meeting MIL STD 461F and other specifications (40GHz) |
|
Independently certified 100 dB @ 18 GHz shielding performance (EN50147-1) |
|
EMC absorbers HyPyr-LossTM Ferrite and Hybrid absorbers |
|
Optimized computer modeling to enable partial hybrid low cost version |
|
This EMC Chamber is a Bespoke and modular design enabling unlimited performance options and facilitating upgrades or relocations |
|
This EMC Chamber is available as part of a complete turnkey package for EMC measurements |
|
Applications |
|---|
|
EMC compliance testing in accordance with Emissions & Immunity standards for all electrical & electronic products |
More Product Information
The SafeLaunch-FTR is based on more than 20 years of skills and experience. Such Flight Termination Receivers equip air to air, ground to air and air to ground missiles as well as UAV, target drones and Launch Vehicles. They are qualified under MIL-STD-810F and MIL-STD-461E standards, and comply to RCC-319. The compact and optimized package is consistent in size and weight with the most severe requirements of missile platforms. The electronical design, based on the latest generation of Software Defined Radio (SDR) components, brings to SafeLaunch-FTR high reliabilty and evolutivity.
FormFactor - Cascade Ultra High-Power (UHP) - Enabling single-contact high-current/high-voltage test
- Enables coaxial measurements up to 10,000 V and 300 A pulsed (600 A in a parallel configuration) with a single touchdown
- Even distribution of high current with innovative multi-fingertip design
- Compatible with TESLA 200/300 mm power device characterization system
- Reduced measurement time by testing both high-voltage and high-current conditions with a single touchdown
- Accurate characterization of a wide range of pad sizes and test currents, with minimum pad damage and contact resistance
- Safe, reliable and repeatable high-current/voltage measurements over a wide temperature range (from -55°C to +300°C)
Xena3918 provides an easy-to-use port configuration panel that lets you add and remove ports, and assign IP addresses and port roles. Ports from multiple XenaBay and XenaCompact chassis can be freely mixed.
- Makes it easy to create, edit and execute all test-types specified in RFC 3918
- Support for IPv4 and IPv6
- Multiple protocols supported per UNI (Ethernet, Customer and Service VLANs, MPLS, IPv4, IPv6, and UDP)
- Support for all IGMP/MLD versions
- Works seamlessly with multiple XenaBay and XenaCompact test chassis
- Ability to flexibly define protocol layers supported by the test incl. Ethernet VLANs, IP and UDP
- Extensive configuration options for fine-tuning tests
The ESD voltage meter MODEL: 18-00086B is a device that can measure the voltageholding time (holding voltage after 5 seconds) and output
specifications during the air discharge test in IEC 61000-4-2.The measured voltage is displayed on a 7-segment LED with peak and holding voltage values.
- Easily measure the Hold Time, the tester specification for air-discharge testing.
- Measure the output voltage from ±2kV to 30kV.
- Monitor the measured voltage waveform by connecting to an oscilloscope.
- Compact, lightweight and easy to carry.
- Energy absorber with a rating of 400VDC at ±150A
- Provides up to 400V at 150A for 60kW of output power
- Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak
Southwest Microwave offers a full range of within-series and between-series precision adapters with near-metrology grade performance.
- High performing connector savers, DC to 110 GHz
- Economical solution for critical production and testing
- Approved for demanding environments such as Space and other Hi-Rel applications
- High repeatability and accuracy
- Available in various connector configurations
Provides 15,000A DC at 5V DC in current mode
- Single complete package
- Integrated bus bars
- Current mode Analog programming
- Input 400VAC, 220A/ph, Delta
Our EuroBrite™ lineup provides industry leading technology with value pricing for an unmatched performance / price ratio:
- Complete built-in control for continuous and strobe modes.
- Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
- Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
- IP67 sealed enclosure suitable for washdown environments.
- Rugged construction that has been tested to withstand over 1000lb.
- Industrial grade LEDs providing high-intensity illumination of 45klux (working distance of 200mm).
- Daisy chain up to 4 for a combined length of 48”.
- Ideal for multiport RF/Microwave and high-speed digital signal testing
- Mix DC and RF/Microwave signals on one probe
- Long lifetime – typically over one million (1,000,000) touchdowns
- Excellent performance in temperatures ranging from 10 K to 200°C
- Probe on any pad material with no damage
Microwave Vision Group (MVG)
The Microwave Vision Group offers cutting-edge technologies for the visualization of electromagnetic waves. With advanced test solutions for antenna characterization, radar signature evaluation and electromagnetic measurements, we support company R&D teams in their drive to innovate and boost product development.
With highly skilled teams across the world and over 450 dedicated employees, we proudly serve the telecommunications, aerospace & defence, automotive, academic and research communities.
Contact Details
Microwave Vision Group
450 Franklin Gateway, Suite 100, Marietta, GA 30067, USA
Phone: 678-797-9172
Test & Measurement
Download Line Card
