You design the future. We help you make it happen.
HYPERLABS - 0.8 mm (145 GHz) Components
HYPERLABS is first to market with 0.8 mm components operating to 145 GHz, breaking through a long-standing industry bandwidth ceiling. These ultra-broadband devices deliver the precision and signal integrity required for next-generation high-speed test and measurement systems.
|
Attenuators |
HL8828 Broadband Attenuator (DC to 145 GHz) The HL8828 is an ultra-broadband attenuator with a typical fixed insertion loss of 6 dB with a very flat frequency response from DC to 145 GHz. |
|---|---|
|
Baluns |
HL8808 Broadband Balun (500 kHz to 145 GHz, -12 dB) The HL8808 is an ultra-broadband 180° signal splitter and combiner that offers excellent amplitude and phase match over an industry-best bandwidth of 500 kHz to 115 GHz (3 dB), with usable bandwidth to 145 GHz (12 dB). |
|
DC Blocks |
HL8838 Broadband DC Block (16 kHz to 145 GHz) The HL8838 is an ultra-broadband DC Block with a typical insertion loss of < 3 dB over an industry-best bandwidth of 16 kHz to 145GHz. |
More Product Information
- Calibration scale 0.5 - 12 mm (0.02 to 0.5“) polygon
- 9 different circles from 0.5 to 12.0 mm outer diameter (0.02 to 0.5“)
- Distance measurements are possible with the polygonal inner shape→ Available with DAkkS- or factory calibration certificate
- Calibration scale 20 / 60 mm (0.8 / 2.4“) polygon
- 2 different circles (20 / 60 mm (0.8 / 2.4“) outer diameter)
- Distance measurements are possible with the polygonal inner shape
- Available with DAkkS- or factory calibration certificate
- Calibration rings 65 / 95 mm (2.5 / 3.7“)
- 2 different circles (65 / 95 mm (2.5 / 3.7“) outer diameter)
- Available with DAkkS- or factory calibration certificate
- Calibration case - practical storage of calibration scales
- Device is according to the standard IEC 60811 -501, -507 (Heat elongation test, tensile test)
- Handy, electric device for material tests in laboratories
- Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)
- Especially for hard materials
HYPERLABS offers ultra-broadband attenuators with a typical fixed insertion loss of 3 dB, 6 dB, or 10 dB and a very flat frequency response from DC to 145 GHz.
- Lithographic thin-film construction
- Excellent crosstalk characteristics
- Non-oxidizing nickel alloy tips
- Innovative force delivery mechanism
- 40GHz, 50GHz, 67GHz, 110GHz and 145GHz connectors available
- GSG, SG, GS, GSGSG, GSSG, SGS configurations
- 50 to 250 µm pitches (other pitches available on request)
- High current version (2 A) available
Advantages
- Superior field confinement reduces unwanted couplings to nearby devices and transmission modes
- Superior measurement accuracy and repeatability
- Small scrub minimizes damage to aluminum pad
- Typical contact resistance < 0. 05 Ω on Al, <0.02Ω on Au
- Save valuable wafer space and reduce pad parasitics by being able to shrink pad geometries to 25 x 35 µ m (best case)
The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz.
- The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
- All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
- Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
- All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
- Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.
HYPERLABS offers the highest-performance Broadband DC Pick-off Tees on the market, with the industry’s lowest levels of insertion loss from DC to 110 GHz.
- SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz.
- Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing.
- SPA available on all ports. User can define which port to use as SPA port.
- Several detection types available in classical mode: Peak, minimum, RMS, Mean.
- Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations.
- Sources and receivers can be independently configured. Can be used as Tracking Generator.
- For units that have a dual source, a dual drive option is available. Support for external source control also possible.
- Phase synchronization for units with Dual source available. This feature allows users to control and configure the phase between the two sources.
- Source and receiver attenuator available with VNA can be activated in SPA mode. Recommendation to use option 62 (with attenuator on receiver side) for measuring the spectrum content of high-power devices.
- Software option: easy to install and upgrade existing user equipment.
The HL945x family of transition time converters (also known as low-pass absorptive rise time filters) provide superior return loss and flat group delay.
HYPERLABS offers a range of high-performance SMD components—including baluns, bias tees, pick-off tees, power dividers, and samplers—delivering industry-leading bandwidth and exceptional value. Optional evaluation boards and volume discounts are available to support system integration.
HYPERLABS, Inc.
Website
Founded in 1992, HYPERLABS is a leading designer and manufacturer of 145+ GHz Ultra-Broadband Baluns, DC Blocks, Pick-Off Tees, Bias Tees, and other high-performance components.
We also build TDR and Signal Integrity instruments used in the test and measurement industry. Our product line includes high-speed and electrostatic-protected instruments, all in low-power, portable form factors that can be controlled from any Windows PC.
