Meatest - MTE Laboratory Impedance Standards
Series of single resistance, capacitance and inductance decadic standards for calibration of ohm meters, LCR meters and multimeters.
- Traceable, accurate and stable
- Low time constant
- Low temperature coefficient
MTE series Laboratory Impedance Standards are designed for use in cal labs as references for calibration of multimeters, ohm meters and LCR meters. Low time constants and dissipation factors make MTE series suitable for use in wide frequency range and low calibration uncertainties and temperature coefficients provide great results for long time.
On request, standards can be equipped with standard gold plated terminals or BNC coaxial connectors in three-terminal, four-terminal or four-pair terminal layout. High resistance standards come with ceramic terminal isolation as standard.
|
Resistance |
100 mΩ - 10 GΩ, 0 - 20 kHz ± 0.005% / year |
|---|---|
|
Capacitance |
10 pF - 100 uF, 20 Hz - 20 kHz ± 0.02% / year |
|
Inductance |
100 mH - 1 kH, 100 Hz - 20 kHz simulated by T-network circuit ± 0.05% / year |
Document
More Product Information
Stable high current calibrator with 120 A AC/DC range, built-in multimeter, floating outputs and both real and simulated transconductance amplifier functions.
- High accuracy throughout all ranges
- 8 Vpk floating outputs
- Real and simulated transconductance amplifiers
Resistance decade box with 100 mΩ - 22 MΩ range and 5W load capacity. Best resolution 1 μΩ, RTD temperature sensor simulation feature.
- Real resistors switched by relays
- 14 decade range, resolution from 1 μΩ
- Custom units and time sequences
- No residual resistance
- 5 W load capacity
- Six different languages
35 ppm AC/DC multifunction calibrator for multimeters, power meters and generally all kinds of electric meters. Implementing modular design, 9010 can be further customized to calibrate oscilloscopes, insulation testers, sources and transducers.
- 35 ppm accuracy
- 400 MHz scope option
- Power quality functions, voltage from current
Resistance decade box designed for RTD and other resistance-based sensors' simulation. 0.01°C accuracy and 0.001°C resolution.
- Real resistors switched by relays
- Custom temperature scales
- No residual resistance
- 0.01°C accuracy
- Six different languages
Flexibility
- Different substrate carriers for wafers up to 150 mm or single dies
- Up to six positioners
- Optional thermal chuck (-60°C to 300°C) and pressure regulation
- Probing with an open chamber lid possible under atmospheric condition
- Specially designed for laboratory environments
- Covers wide range of measurements (I-V, C-V, RF, MEMS, OPTO)
See "Specifications & Details" tab for more key features
Bank of fixed resistance, capacitance and inductance standards with defined frequency characteristic up to 1 MHz for automated calibration of LCR meters.
- Automated RCL calibration
- Calibration data from 20 Hz to 1 MHz
- No need for pen and paper method
Flexibility
- Different substrate carriers for wafers up to 100 mm or single dies
- Up to six positioners
- Use with liquid nitrogen or helium, depending on the target temperature
- Probing with an open chamber lid possible under atmospheric condition
- Specially designed for laboratory environments
- Covers wide range of measurements (I-V, C-V, RF, MEMS, OPTO)
See "Specifications & Details" tab for more key features
Mechanic high resistance decade with RS232 remote control for voltages up to 5 kV. Internal battery for up to 3 hours of on site calibration.
- 12 GΩ and 5 kVdc limits
- Voltage limit indication
- Battery-powered
- Remote control via RS232 bus
10 ppm AC/DC multifunction calibrator for multimeters , power meters and generally all kinds of electric meters. Implementing modular design, 9010+ can be further customized to calibrate oscilloscopes, insulation testers, sources and transducers.
- 10 ppm accuracy
- 400 MHz and 1.1 GHz scope options
- Power quality functions, voltage from current
Meatest
Website
We develop and manufacture electrical calibration instruments for calibration laboratories and testing facilities in electronics, engineering, utility, aeronautics and telecommunications sectors. Designed for automated calibrations our instruments bring effective solutions to customers like NPL, Samsung, Siemens and Volkswagen.
Contact Details
Meatest, spol. s r.o. Headquarters
