Meatest - M160i Precision DC Calibrator
-
20 ppm accuracy
-
13°C - 33°C reference temp. range
-
100 V @ 25 mA output capacity
20 ppm calibrator of DC process signals designed for calibration of evaluation units and process multimeters under demanding industrial conditions.
Precision DC calibrator M160i is a portable source of industrial process signals for calibration of multimeters in laboratories as well as on site calibration of evaluation units and other process meters. High load capacity of both voltage and current outputs, robust design and exceptional 20 ppm accuracy over 20°C-wide reference temperature range make this calibrator great for demanding conditions in production facilities. Other functions include thermocouple simulation and frequency, all with accuracy and resolution to meet all requirements. With option 91 the calibrator can measure temperature directly at output terminals and compensate the cold junction effect.
User comfort
Beside M160i's industrial versatility, the calibrator is focused on user friendliness making calibrations simple and straightforward. Main parameters of both generated and measured signals are displayed on large LCD together with function-specific tooltip, providing all relevant details including range, accuracy or load limit. Inspired by recalibration simplicity of M6xx series, the M160i can be easily calibrated using just its front keyboard without any mechanical adjustment inside the instrument. M160i can be connected to various ATE systems via RS232, USB, LAN or GPIB interface and is fully compatible with WinQbase/Caliber calibration software including the CamOCR module for automated optical UUT readouts.
DC voltage |
0 - 100 V, max. burden up to 2.5 W ± 20 ppm / year |
DC current |
0 - 50 mA, max. burden up to 2.5 W ± 50 ppm / year |
Temperature | TC BCDEG2JKMNRST with cold junction compensation |
Frequency |
0.01 Hz - 15 kHz ± 50 ppm / year |
Process Meter
Frequency |
0.01 Hz - 100 kHz ± 50 ppm / year |
More Product Information

A highly precise skew matching cable assembly with skew of 1psec or less between 2 cables, designed for digital transmission evaluation. Continuous operating temperature range: -30 to +85°C.
Exhibits low cable insertion loss and is suitable for high-precision differential signal transmission evaluation and measurement applications. 4 types of cables with different maximum usage frequencies (26.5GHz, 40GHz, 50GHz, and 67GHz) are available.

-
Real resistors switched by relays
-
14 decade range, resolution from 1 μΩ
-
Custom units and time sequences
-
No residual resistance
-
5 W load capacity
-
Six different languages

-
High accuracy throughout all ranges
-
8 Vpk floating outputs
-
Real and simulated transconductance amplifiers

-
Automated RCL calibration
-
Calibration data from 20 Hz to 1 MHz
-
No need for pen and paper method
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT2300C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT2300C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands

-
12 GΩ and 5 kVdc limits
-
Voltage limit indication
-
Battery-powered
-
Remote control via RS232 bus
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 30 µs to 33.5 s)
-
Auto white balance (GT6600C model only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT6600C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
-
EF lens control (order option -18)
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT3300C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT3300C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands

- Reduce your time spent debugging boards due to high precision fault isolation
- Improve your time to market and reduce project risk by early design verification
- Reduce your test development time by reusing tests from prototype/design in manufacturing and field support
- Ongoing time savings by test reuse across projects

Meatest
We develop and manufacture electrical calibration instruments for calibration laboratories and testing facilities in electronics, engineering, utility, aeronautics and telecommunications sectors. Designed for automated calibrations our instruments bring effective solutions to customers like NPL, Samsung, Siemens and Volkswagen.
Contact Details
Meatest, spol. s r.o. Headquarters
Železná 509/3, Czech Republic - 619 00 BRNO
GPS: 49°10'13.93"N,16°36'53.2"E
Phone: 420-543-250-886
Fax: 420-543-250-890
Email: meatest@meatest.cz
Test & Measurement





