Overview
Specifications & Details
Datasheets & Downloads
Videos

Image optimization features:

Auto gain (manual gain control: 0 to 33 dB)
Auto exposure (manual exposure control: 15 µs to 26.8 s)
Auto white balance (GT4905C only)
Binning (horizontal and vertical)
Color correction, hue, saturation (GT4905C only)
Column defect masking
Decimation X/Y
Gamma correction
Three look-up tables (LUTs)
Region of interest (ROI), separate ROI for auto features
Reverse X/Y

Camera control features:

EF lens control (order option -18)
Event channel
Image chunk data
IEEE 1588 Precision Time Protocol (PTP)
RS232
Storable user sets
StreamBytesPerSecond (bandwidth control)
Stream hold
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
Temperature monitoring (main board and sensor board)
Trigger over Ethernet (ToE) Action Commands

Manufactured By: Allied Vision Technologies

More

Prosilica GT4905 is a 16 Megapixel camera with a GigE Vision compliant Gigabit Ethernet port and Hirose I/O port. Prosilica GT4905 is offered in both monochrome and color models. This camera incorporates the high quality ON Semiconductor KAI-16050 TRUESENSE Gen 2 CCD sensor providing excellent monochrome and color image quality. At full resolution, this camera runs 7.5 frames per second. With a smaller region of interest, higher frame rates are possible. It is a rugged camera designed to operate in extreme environments. This camera is a large format housing camera with a standard F-Mount lens mount. By default monochrome models ship with no optical filter and color models ship with an IRC30 IR cut filter.

Benefits and features:

Monochrome (GT4905) and color (GT4905C) models
GigE Vision interface with Power over Ethernet
Screw mount RJ45 Ethernet connector for industrial environments
Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
The ON Semiconductor KAI-16050 TRUESENSE Gen 2 is a high sensitivity CCD sensor
Trigger over Ethernet (ToE) Action Commands allows for a single cable solution
Planarity adjustable (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
Support for popular third party image-processing libraries including Cognex VisionPro, MathWorks MATLAB, National Instruments LabVIEW, Stemmer Imaging Common Vision Blox, MVTec HALCON and MERLIC

Options:

Available with F-Mount PA, M58-Mount, M58-Mount PA, EF-Mount PA, M42-Mount, M42-Mount PA
Available with IR cut filter or protection glass
Class 1 sensor option

See the Modular Concept for lens mount and optical filters options.

See the Customization and OEM Solutions page for additional options.

Interface

IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)

Resolution

4896 (H) × 3264 (V)

Sensor

ON Semi KAI-16050

Sensor type

CCD Progressive

Sensor size

Type APS-H

Pixel size

5.5 µm x 5.5 µm

Lens mount (default)

F-Mount

Max. frame rate at full resolution

7.5 fps

ADC

14 Bit

Image buffer (RAM)

128 MByte

Output

Bit depth

14 (monochrome); 12 (color) Bit

Monochrome pixel formats

Mono8, Mono12, Mono12Packed, Mono14

YUV color pixel formats

YUV411Packed, YUV422Packed, YUV444Packed

RGB color pixel formats

RGB8Packed, BGR8Packed, RGBA8Packed, BGRA8Packed

Raw pixel formats

BayerGR8, BayerGR12, BayerRG12Packed

General purpose inputs/outputs (GPIOs)

TTL I/Os

1 input, 2 outputs

Opto-isolated I/Os

1 input, 2 outputs

RS232

1

Operating conditions/dimensions

Operating temperature

-20 °C to +50 °C ambient (without condensation)

Power requirements (DC)

7 to 25 VDC; PoE

Power consumption

7.3 W @ 12 VDC; 9.0 W PoE

Mass

372 g

Body dimensions (L × W × H in mm)

96 × 66 × 53.3 (including connectors)

Regulations

CE: 2014/30/EU (EMC), 2011/65/EU (RoHS); FCC Class A; CAN ICES-003 Issue 4/5

Quantum efficiency

Prosilica GT Data sheet 4905

Allied Vision Product Lineup V5.0.0

GigE Installation Manual V1.2.0

Prosilica GT Technical Manual V2.9.0

GigE Features Reference V5.3.2

Camera and Driver Attributes

Modular Concept external V10.0.0

Technical papers, knowledge base

3D CAD files (STEP)

Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: http://www.ida-step.net/

Software and firmware

Vimba is our current future-proof SDK.

Other SDKs and tools are available on our Software downloads webpage.

GigE camera firmware is available on our Firmware webpage.

View YouTube Channel

Prosilica GT cameras by Allied Vision Technologies

AVT - Prosilica GT 4905 16 MP CCD machine vision camera for extreme environments