Brandywine - TCP Flight-Qualified Airborne Timecode Processor
- Flight Qualified
- Support for IEEE-1588 and GPS Havequick II I/O
- Input IEEE-1588 and Convert to IRIG A/B
- Tested to MIL-STD 810F and 461E CE102 and RE 102
- Custom options available
Brandywine Communications’ Miniature Airborne-Qualified Time Code Processor (TCP-AM), is an extremely accurate and robust instrument that can be synchronized to a variety of external time sources and is a source of IRIG-AM, IRIG-DCLS, GPS HQ, NTPv4 (RFC 5905) or PTPv2 (IEEE 1588-2008) time codes.
Time Code Outputs
|
Connector Type |
BNC |
|---|---|
|
Input Amplitude |
IRIG-B121...127 |
|
Input Impedance |
3.0 Vpp (no load), 2.0 Vpp (into 600 ohms) |
Ancillary Signals
|
Output Options |
Programmable Pulse 1, Programmable Pulse 2, Programmable Pulse 3, Programmable Pulse 4, 1PPS, GPS On-Time Mark, GPS Have-Quick II, GPS Lock IRIG-DC |
|---|---|
|
Input Options |
Event 1 to Event 4, Debounced switch closure input, Logic level input (accuracy +/- 100 ns) |
|
RS232 |
NMEA messages (Time/Location) |
|
Connector Type |
Glenair 801-011-07M7-10SA |
|
Mating Connector Type |
Glenair 801-008-16M7-10PA |
Power
|
Power |
9 to 36 V DC, 1.5 W (no options) |
|---|
Internal Time Base
|
Stability |
1 ppm (@ 25 deg C) |
|---|---|
|
Stability over Temperature |
1 ppm (-40 to +40 deg C) |
|
Long Term Stability |
1 ppm (1 year @ 25 deg C) |
|
Calibration Range |
+/- 8 ppm |
|
Calibration Accuracy |
+/- 15 ppb of external time source (@ 25 deg C) when disciplined |
Synchronization
|
IRIG-B |
Within +/- 10 µs of external source at initial synchronization |
|---|---|
|
GPS |
Within +/- 200 ns of external source |
|
GPS HaveQuick II |
Within +/- 200 ns of external source |
Environmental
|
Temperature |
|
|---|---|
|
Operating |
-40 to +60 deg C [without Li-Ion battery] |
|
Storage |
-50 to +70deg C |
|
Humidity |
95% Non-condensing |
GPS Receiver
|
Power |
5V active antenna power output, Short circuit and open detection |
|---|---|
|
Connector Type |
TNC |
More Product Information
- Single-slot 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- Precise programming of voltage and current slew rate for sensitive loads.
- Industrial field bus interfaces (Modbus-TCP, Modbus-RTU, Ethernet) enable real-time digital control.
- Built-in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
- Programmable analog interface scaling facilitates integrating the ASD FLX with existing systems easily.
- Built-in energy meter calculates the delivered energy throughout a process or period.
- Optional real-time clock enables accurate timestamping of events.
- Single-slot low profile 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- Designed for Low Profile PCI Express slots.
- Solve machine vision applications efficiently by constructing flowcharts instead of writing program code, using field-proven tools for analyzing, classifying, locating, measuring, reading and verifying
- Use a single program for creating both application logic and operator interface
- Leverage deep learning for visual inspection through image classification and segmentation tools
- Rely on a common underlying vision library for the same results with an Iris GTX smart camera, vision systems or third-part computer
- Work with multiple cameras all within the same project or per project running concurrently and independently from one another, platform permitting
- Interface to Zebra AltiZ and third party 3D sensors to visualize, process and analyze depth maps and point clouds
- Communication options include discrete Zebra I/Os, RS-232, and Ethernet (TCP/IP, CC-Link IE Field Basic, EtherNet/IP, Modbus, OPC UA, and PROFINET, and native robot interfaces)
- Maximize productivity with instant feedback on image analysis and processing operations
- Receive immediate pertinent assistance through an integrated contextual guide
- Maintain control and independence through the ability to create custom flowchart steps
- Test communication with PLC using the built-in PLC interface emulator
- Protect against inappropriate changes with the Project Change Validator tool
- 5 MHz or 10 MHz Outputs Available
- Reference Frequency Input Option
- Auto Changeover with Ref. Input Option
- Low Phase Noise Outputs
- Twenty four Outputs
- Front Panel Status Indicators
- Fault Discrete Inputs
- Compact 1U, 19” rack mount
- Compact size and low cost
- Uses Network Time Protocol to synchronize computers and other devices
- Programmable serial message compatible with almost any time display
- Browser based user interface for easy setup
- GPS synchronized
- LED colons indicate GPS lock status
- Network Time Server
- Dual Redundant Version Available
- Complete Remote Network Control using Standard Web Browser
- SAASM/M-Code GPS Receiver
- 10MHz, 1PPS IRIG B, Serial and Time Codes
- Timing Accuracy 40ns rms to UTC
- 1PPS, Have Quick Inputs
- 1U 19” rack mount
- Dual Redundant hot swappable Power Supplies
- Dual GPS Disciplined Modules
- Digital Clock Automatically Synchronizes with NTP servers over Ethernet Network
- 0.5”, 3.2” or 5” display sizes
- Remote network management
- Time Zone and Daylight Savings support
- Multiple colors
- Optional Network Time Server version with built-in GPS receiver
- Optional built-in IRIG B time code reader
Brandywine Communications
Brandywine Communications Inc. offers superior products to the time and frequency marketplace. Our mission is to provide the finest equipment coupled with excellent before and after sale service. Our staff of dedicated professionals, based in Tustin, CA, represents over 100 years of collective experience in design, manufacturing and sales of precision time and frequency products. Many of our products are made here in the United States, which allows for quick turnarounds and custom design.
Products from Brandywine Communications range from components such as Oven Controlled Oscillators to complete timing systems like the top of the line High Performance Timing System (HPTS).
Several state-of-the-art time and frequency systems are available from Brandywine. The system product line includes single and dual-redundant models, GPS synchronization and a wide range of oscillator choices: TCXO, OCXO, high-stability OCXO and Rubidium types. GPS choices include both C/A code and SAASM models.
Brandywine also is the premier North American distributor of Oscilloquartz, a subsidiary of ADVA Optical Networking. Oscilloquartz is a premier synchronization supplier for telecommunications for wireline and wireless infrastructures throughout the world. This partnership creates a powerhouse of timing and telecommunications that expand Brandywine's services to their customers in the US and Canada.
We supply several major market segments including: Aerospace, US and Municipal governments, telecommunications, US military, power utilities, financial institutions, test ranges, automotive industry, healthcare and schools.
Brandywine Communications, Inc. is certified as a Small Business Organization with the United States Small Business Administration (SBA’s 8(a) Certification Program) and is registered on the System for Award Management (SAM.gov) website which makes us eligible for all awards or grants specified under this provision.
Contact Details
Brandywine Communications Inc. - Ultra-Precision Time & Frequency
2921 Daimler Street, Santa Ana, CA 92705, USA
Phone: +1-714-755-1050
Email: support@brandywinecomm.com
Embedded
Download Line Card
Document
