Brandywine - IBU-160i Intelligent Time Code Distribution Amplifier
- Network Enabled Time Code Distribution Amplifier
- Dual Time Code Inputs with Auto Failover
- Support for Analog Time Codes between 100Hz and 100KHz
- Programmable per channel amplitude
- 1U 19” rack mount
- Redundant Hot Swappable Power Supplies
The IBU-160i is a general-purpose frequency distribution amplifier designed for use with Brandywine high precision time sources, contained in a compact 1U rack-mount chassis
The IBU accepts two sets of inputs, comprising the reference input (100 Hz – 100 KHz) and status from the source. The IBU provides automatic changeover should one of the on-line source inputs fail. Manual source select override is available on the front panel, or through the Ethernet interface.
A variety of status indicators are located on the front panel for instant visual feedback, together with manual controls for source selection.
A 10/100 base T Ethernet interface provides full control over the functionality of the system, including reference selection and output amplitude (on a per channel basis).
User control of the unit is via a built-in Web Browser with user-friendly graphical interface, or via SNMP for system applications.
Applications for the IBU-160i include test ranges, satellite control centers, shipboard time distribution, airports, rail terminals, and any system requiring highly reliable time code distribution.
Time Code Inputs
|
Frequency Range |
Analog Time Code 100 Hz – 100 KHz |
|---|---|
|
Typical Time Codes |
IRIG A, B, E, G, NASA 36, XR3, AFNOR |
|
Amplitude and Impedance |
0.5-10Vpp, 600 Ω |
|
Isolation |
Transformer Coupled |
|
Number of Inputs |
2 |
|
Connector Type |
BNC |
|
Input Selection |
Manual, Auto |
Fault Inputs
|
Number of Inputs |
2 |
|---|---|
|
Signal Type |
TTL |
|
Active Level |
Selectable for active high or low |
|
Action |
Forces on-line changeover |
Time Code Outputs
|
Number of Outputs |
16 |
|---|---|
|
Frequency |
Same as input, 10 MHz |
|
Optional |
1-20, 1, 5 MHz |
|
Output Level |
5dBm to +13dBm, short-circuit proof |
|
Connector Type |
BNC |
|
Harmonic Distortion |
-40 dBc |
|
Cross Talk |
-80 dBc |
|
Spurious |
-80 dBc |
|
Additive Phase Noise@10MHz |
|
|
1 Hz |
-132 dBc |
|
10 Hz |
-142 dBc |
|
100 Hz |
-155 dBc |
|
1 kHz |
-163 dBc |
|
10 kHz |
-163 dBc |
Network Interface
|
Interface Type |
10/100 BaseT |
|---|---|
|
Protocols |
HTTP, DHCP, SNMP V2c, IPV4 |
|
Connector Type |
RJ45 |
Console Port
|
Interface Type |
RS232 |
|---|---|
|
Parameters |
115200, N, 8, 1 |
|
Connector Type |
DB9 |
Display
|
Display Type |
16 Bicolor LED |
|---|---|
|
Functions |
Output status, Ethernet settings |
Status Output (Alarm)
|
Type |
Dry relay form C contacts, Ethernet SNMP trap |
|---|---|
|
Alarm Function |
Summary of all input/output alarms (relay), Individual input, output, power (Ethernet) |
Power
|
Redundancy |
Dual Redundant, Single supply maintains complete unit |
|---|---|
|
Voltage |
90-240 VAC 50/60Hz, 18-36V DC Optional, 36-72VDC Optional |
|
Power Consumption |
<15W |
Environmental
|
Temperature |
|
|---|---|
|
Operating |
-10 to +55ºC non condensing |
|
Storage |
-40 to +85ºC |
|
Product Safety |
EN60950-1: 2006 + A11-2009 +A1:2010 A12:2011 |
|
EMC Emission |
EN55022 Class A, EN50082-2, FCC Chapter 15 Class A |
Document
More Product Information
- High-density, compact (1U) precision data acquisition instruments
- LXI™ LAN connectivity
- Fully integrated signal conditioning maximizes performance and accuracy
- Easily integrate thermocouples, voltages, RTDs, thermistors, frequency, strain and pressure on an per-channel basis
- Distributed, synchronized measurements over the wire
- Scalable architecture easily expands from tens to thousands of channels
- DC version available for test cells requiring closer proximity to test article
- End-to-end self-calibration ensures optimum runtime performance
- Web-based access for monitoring and control
- Exlab turnkey software for simplified setup, control and data display
- Support for the highest speeds available in CoaXPress 2.0
- Connect to and capture from up to four cameras or combine connections for even higher data rates
- Simplify cabling with PoCXP support between cameras and vision computer
- Offload host computer of custom image processing using a field-programmable gate array (FPGA) device
- Distribute image processing workload across multiple computers through data forwarding capability
- Synchronize with sensors, encoders, and controllers with ample auxiliary I/Os for each CoaXPress connection
- Use license fingerprint for Aurora Imaging Library and avoid the need for a separate hardware key
- Monitor and troubleshoot acquisition performance in detail using Aurora Gecho event-logging tool
- Allan deviation σ(τ) = 2.7×10-11 T-1/2 for long life version and σ(τ) = 8.5×10-12 T-1/2 for high performance version
- Front or Rear access connectors
- 3U high (133mm / 5.24”) — less than 200mm depth, compatible with ETSI and 19” standards
- Accuracy better than ±1×10-12 / ±5×10-13 for high performance version
- 10 MHz low noise direct output
- Programmable 1 / 5 / 10 MHz TTL output
- 10 years warranty on cesium tube (3 years for high performance version)
- Redundant DC power supply inputs
- Remote control and monitoring via RS232 (fully manageable locally and remotely using SyncView Plus management system.
- Digital Clock Automatically Synchronizes with NTP servers over Ethernet Network
- 0.5”, 3.2” or 5” display sizes
- Remote network management
- Time Zone and Daylight Savings support
- Multiple colors
- Optional Network Time Server version with built-in GPS receiver
- Optional built-in IRIG B time code reader
- Single-slot 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- Network Enabled Time Code Distribution Amplifier
- Dual Time Code Inputs with Auto Failover
- Support for Analog Time Codes between 100Hz and 100KHz
- Programmable per channel amplitude
- 1U 19” rack mount
- Redundant Hot Swappable Power Supplies
The TEM horn antenna is an antenna used for conducting close proximity radiation immunity evaluation test (near electromagnetic field immunity test) of electromagnetic waves radiated from various wireless transmitters such as mobile devices.
In the future, close proximity radiation immunity evaluation test using the TEM horn antenna is expected to expand to various product standards such as medical equipment (IEC 60601-1-2) and multimedia equipment (CISPR 35). NoiseKen's TEM horn antenna has a wide band, low VSWR, and wide electric field uniformity offering an ideal solution for an efficient close proximity radiation immunity test.
- A TEM horn antenna compliant with IEC 61000-4-39 Ed.1.
- Test without changing the antenna in the frequency range of 380MHz to 6GHz.
- Low VSWR and high GAIN enable efficient electromagnetic wave radiation.
- Wide field uniformity reduces the number of times of movement of the antenna when radiating the EUT.
- Since the maximum point of the near electric field distribution for each frequency is at the center, enables radiation on the EUT based on the axis of the antenna. Hence, significantly simplifies test point alignment.
- 6U, Single Width VME
- Time Code Inputs
- Time Code Output
- 1PPS Pulse Rate Output/Interrupt
- Frequency Outputs (1, 5, 10 MHz)
- External Event Capture/Interrupt
- Programmable Periodic Output/Interrupt
- Programmable Time Strobe Output/Interrupt
- Ruggedized
- Flight Qualified
- Available with vibration-isolated OCXO or CSAC Oscillator options
- Gigabit Ethernet
- GNSS, SAASM, or M-Code supported
- Designed for GPS denied environments
Brandywine Communications
Brandywine Communications Inc. offers superior products to the time and frequency marketplace. Our mission is to provide the finest equipment coupled with excellent before and after sale service. Our staff of dedicated professionals, based in Tustin, CA, represents over 100 years of collective experience in design, manufacturing and sales of precision time and frequency products. Many of our products are made here in the United States, which allows for quick turnarounds and custom design.
Products from Brandywine Communications range from components such as Oven Controlled Oscillators to complete timing systems like the top of the line High Performance Timing System (HPTS).
Several state-of-the-art time and frequency systems are available from Brandywine. The system product line includes single and dual-redundant models, GPS synchronization and a wide range of oscillator choices: TCXO, OCXO, high-stability OCXO and Rubidium types. GPS choices include both C/A code and SAASM models.
Brandywine also is the premier North American distributor of Oscilloquartz, a subsidiary of ADVA Optical Networking. Oscilloquartz is a premier synchronization supplier for telecommunications for wireline and wireless infrastructures throughout the world. This partnership creates a powerhouse of timing and telecommunications that expand Brandywine's services to their customers in the US and Canada.
We supply several major market segments including: Aerospace, US and Municipal governments, telecommunications, US military, power utilities, financial institutions, test ranges, automotive industry, healthcare and schools.
Brandywine Communications, Inc. is certified as a Small Business Organization with the United States Small Business Administration (SBA’s 8(a) Certification Program) and is registered on the System for Award Management (SAM.gov) website which makes us eligible for all awards or grants specified under this provision.
Contact Details
Brandywine Communications Inc. - Ultra-Precision Time & Frequency
2921 Daimler Street, Santa Ana, CA 92705, USA
Phone: +1-714-755-1050
Email: support@brandywinecomm.com
Embedded
Download Line Card
Document
