AVT - Guppy PRO F-201 2 Megapixel camera, Sony ICX274, attractive price
-
Compact 2 MP camera
-
Robust metal housing
-
Sony ICX274
-
Optocoupled I/Os
-
Various IR cut/pass filters
-
White medical housing
The Guppy PRO F-201B/F-201C is a 2 Megapixel IEEE 1394b camera with a robust metal housing and Sony's ICX274 sensor. At full resolution, it runs 14 frames per second.
Specifications
Interface
IEEE 1394b - 800 Mb/s, 1 port
Resolution
1624 (H) × 1234 (V)
Sensor
Sony ICX274
Sensor type
CCD Progressive
Sensor size
Type 1/1.8
Pixel size
4.4 µm × 4.4 µm
Lens mount (default)
C-Mount
Max. frame rate at full resolution
14 fps
ADC
12 Bit
Output
Bit depth
8-12 Bit
Monochrome pixel formats
8/12/16
RGB color pixel formats
RGB8
Raw pixel formats
8/12/16
Operating conditions/dimensions
Operating temperature
+5 °C to +45 °C
Power requirements (DC)
8 V to 36 V
Power consumption
<3.5 W (@ 12 VDC)
Mass
80 g
Body dimensions (L × W × H in mm)
44.8 × 29 × 29 (including connectors)
Regulations
CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class B
Features
- Look-up table (LUT)
- Gamma correction
- Color correction
- Area of interest (AOI), separate AOI for auto features
- Binning
- Sub-sampling
- Auto gain (manual gain control: 0 to 24.4 dB)
- Auto exposure (55 µs to 67 s)
- Trigger programmable, level, single, bulk, programmable delay
- Storable user sets
Scope of delivery
- Camera and IEEE 1394b cable (other configurations on request)
Applications
The Guppy PRO F-201B/F-201C suits particularly well for applications with space constraints. Besides this, it has an excellent price/performance ratio.
Typical applications:
- Machine vision
- Robotics
- Logistics
- Pharmaceutical industry
- Multimedia
- ITS/traffic monitoring
Quantum efficiency
Document
Document
Document
Technical papers, knowledge base
3D CAD files (STEP)
Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/
Software and firmware
Vimba is our current future-proof SDK.
You can also download legacy software for 1394 cameras.
To obtain firmware for your 1394 camera, please contact our technical support team.
More Product Information
Our EuroBrite™ lineup outdoes the competition in so many ways. With more features at a competitive price point, there’s no better value in machine vision lighting:
- Complete built-in control for continuous and strobe modes.
- Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
- Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
- IP67 sealed enclosure suitable for washdown environments.
- Rugged construction that has been tested to withstand over 1000lb.
- Industrial grade LEDs providing high-intensity surface illumination of 38klux.
- The BL128 Series provides a compact linear backlight solution ideal for space-constrained line scan applications.
- Its ultra-thin profile (less than ½”) minimizes vertical footprint, and bezel-free design along the length allows for placement of its emitting window right up to adjacent surfaces.
- While optimized for line scan setups, the BL128’s versatility extends to general-purpose machine vision lighting as a non-directional, highly diffuse bar light illuminator when needed.
- Rugged, cast aluminum housing has an outer diameter of 8.4” (213mm) and an inner, working diameter of 6.1” (155mm).
- The Medium Dome Light is available in a wide range of wavelengths including a 3 channel, RGB configuration.
- Provides up to 59kLux at a 1” (25mm) standoff.
- Compact size and low cost
- Uses Network Time Protocol to synchronize computers and other devices
- Programmable serial message compatible with almost any time display
- Browser based user interface for easy setup
- GPS synchronized
- LED colons indicate GPS lock status
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
-
IMX226 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-1240m) and color (1800 C-1240c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
-
Customizable configuration up to 25 contacts: RF, Eye-Pass power, ground, logic
-
Lithographically-defined tips allow automated over temperature measurement on pads as small as 30 µm x 50 µm
-
Low and repeatable contact resistance on aluminum pads (< 0.05 Ω) ensures accurate results
-
Durable probe structure ensures more than 250,000 contacts
-
Able to measure from -40°C to +125°C without compromising performance or accuracy of specifications
-
Different substrate carriers for wafers up to 200 mm or single dies
-
Probe cards and/or up to eight positioners
-
Independently cooled cold shield
-
Probe positioners placed inside vacuum chamber
-
Intuitive, manual drives
-
Front loading capability through load door
-
Independent control of linear chuck stage and positioners
-
Contact/separation stroke for chuck
See more Key Options in Specifictions & Details tab
The LWP series Lightwave Probe enables optical measurements for on-wafer and hybrid photonics devices. It features user replaceable fiber pigtails allowing the probe to be optimized for a variety of light delivery and light collection applications including the characterization of topside illuminated photodiodes, Vertical Cavity Surface Emitting Lasers (VCSELs), hybrid transmitters and receivers, and LEDs.
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
Download Line Card
Document
