Overview
Specifications & Details
Datasheets & Downloads
Videos

Monochrome (G-503B) and color (G-503C) models
GigE Vision interface with Power over Ethernet
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
Supports cable lengths up to 100 meters (CAT-6 recommended)
Comprehensive I/O functionality for simplified system integration
Popular C-Mount lens mount
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter

Manufactured By: Allied Vision Technologies

More

Mako G-503 is a 5.0 megapixel GigE machine vision camera that incorporates the high quality Type 1/2.5 (7.13 mm diagonal) ON Semiconductor MT9P031 (monochrome) or MT9P006 (color) CMOS sensor. At full resolution, this camera runs 14 frames per second. With a smaller region of interest, higher frame rates are possible.

Mako G cameras have an ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet, three opto-isolated outputs, and a 64 MB image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship with a Type Hoya C-5000 IR cut filter.

See the Modular Concept for lens mount and optical filter options.
See the Customization and OEM Solutions webpage for additional options.

Specifications

Interface

IEEE 802.3 1000BASE-T, IEEE 802.3af (PoE)

Resolution

2592 (H) × 1944 (V)

Sensor

ON Semi MT9P031 / MT9P006

Sensor type

CMOS

Sensor size

Type 1/2.5

Pixel size

2.2 µm × 2.2 µm

Shutter mode

Global reset and Rolling shutter

Lens mounts (available)

C-Mount, CS-Mount, S-Mount

Max. frame rate at full resolution

14 fps

ADC

12 Bit

Image buffer (RAM)

64 MByte

Imaging performance

Imaging performance data is based on the evaluation methods in the EMVA 1288 Release 3.1 standard for characterization of image sensors and cameras. Measurements are typical values for monochrome models measured at full resolution without optical filter. Contact Sales or AE for more information.

Quantum efficiency at 529 nm

55 %

Temporal dark noise

7.5 eˉ

Saturation capacity

6000 eˉ

Dynamic range

57.6 dB

Absolute sensitivity threshold

8.0 eˉ

Output

Bit depth

8/12 Bit

Monochrome pixel formats

Mono8, Mono12, Mono12Packed

Raw pixel formats

BayerGR8, BayerGR12Packed, BayerGR12

Operating conditions/dimensions

Operating temperature

+5 °C to +45 °C housing temperature

Power requirements (DC)

12 to 24 VDC AUX or 802.3at Type 1 PoE

Power consumption

2.0 W at 12 VDC; 2.2 W PoE

Mass

80 g (with C-Mount)

Body dimensions (L × W × H in mm)

60.5 × 29.2 × 29.2 (including connectors)

Regulations

CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class B; CAN ICES-003

Features

Image optimization features:

Auto gain (manual gain control: 0 to 24 dB; 1 dB increments)
Auto exposure (31 µs to 1 s; 36.4 µs increments)
Auto white balance (G-503C only)
Binning
Color transformation, hue, saturation (G-503C only)
Decimation
Defect pixel masking (user defined with Defect Mask Loader tool)
Gamma correction
One look-up table
Region of interest, separate region for auto features
Reverse X/Y

Camera control features:

Event channel
Image chunk data
Storable user sets
StreamBytesPerSecond (bandwidth control)
Stream hold
Switchable Rolling and Global Reset shutter modes
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
Temperature monitoring (main board only)

Applications

Mako G-503 is suitable for a wide range of applications including:

Robotics
Quality control
Inspection, surveillance
Industrial imaging
Machine vision
Logistics

Quantum efficiency

Quantum efficiency for Mako G-503

Mako G Data Sheet G-503

Allied Vision Camera Line-Up V5.3.2

Mako G QuickStart Guide V1.0.0

Mako G Technical Manual V4.4.5

GigE Features Reference V5.5.0

Camera and Driver Attributes

Modular Concept External V11.7.0 | 2020-Apr-01

Choosing a Machine Vision Camera application note

IEEE1588 PTP for Prosilica GT, GC, Manta, and Mako G cameras application note

Trigger over Ethernet - Action Commands application note

Defect Masking application note

Hardware Selection for Allied Vision GigE Cameras application note

GigE Firmware Update application note

Technical papers, knowledge base

3D CAD files (STEP)

Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/

Software and firmware

Vimba is our current future-proof SDK.

Other SDKs and tools are available on our Software downloads webpage.

GigE camera firmware is available on our Firmware webpage.

View YouTube Channel

AVT - Mako G-503 Gigabit Ethernet camera, ON Semiconductor CMOS sensor, 14 fps