AVT - Alvium 1800 C -240 Embedded vision CSI-2 camera with IMX392 sensor
-
IMX392 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-240m) and color (1800 C-240c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
Alvium CSI-2 cameras enable new designs for embedded applications with improved image quality and reduced workload for the host. The innovative ALVIUM System on Chip (SoC) performs image corrections and preprocessing tasks onboard the camera instead of the host computer. Unlike FPGAs commonly used in machine vision cameras, the ALVIUM SoC is extremely power efficient. With Alvium, integrating hardware and software can be done effortlessly, which ultimately reduces development time. The Sony IMX392 CMOS sensor enables imaging at 2.4 megapixel and 126 frames per second. Color models ship with an IR cut filter, monochrome and S-Mount models ship without a filter or protection glass.
View product page to configure camera options.
Hardware options
- Housing: Bare board or open housing
- Various lens mounts: C-Mount, CS-Mount, or S-Mount
For more information on hardware options, including product codes and technical data, such as technical drawings and mass, see the Alvium Cameras Hardware Options document.
Available accessories
- Tripod adapter
- Adapter boards, such as for Nitrogen6_MAX and Wandboard i.MX6
- FPC cables in 120 mm, 220 mm, and 420 mm length
- Various lenses and Allied Vision S-Mount lenses with focal lengths 2.97 - 12 mm
More Product Information

-
Monochrome (G-040B) and color (G-040C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.

Alvium 1800 U is a small and powerful industrial camera. Benefit from high image quality at a great price-performance ratio!
- Various sensors: Select between CMOS sensors from ON Semi and Sony, including NIR (near infrared), for your individual applications.
- Image reproduction quality: Get the best out of your lens-to-sensor combination by high-precision Alvium Sensor Alignment.
- Intelligent power management: Design low-power or even battery-powered systems.
- USB 3.1 Gen 1: Install our VIMBA Suite and get your first images easily.
- Industrial-grade hardware: Design reliable applications by the Micro-B USB 3.1 Gen 1 connector with screw locks.

-
Fast Camera Link InGaAs SWIR camera
-
VGA resolution
-
Compact industrial design, no fan
-
Simple camera configuration via GenCP
-
Compact industrial design
-
Up to 301 fps at full resolution
-
Camera Link interface with GenCP support
-
Comprehensive I/O control options
-
Automated on-board image correction
-
Stabilized sensor cooling, no fan
-
Extended operating temperature range

-
Sony IMX540 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-2460B) and color (G-2460C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.

-
Affordable GigE Vision InGaAs SWIR camera
-
QVGA resolution
-
Power over Ethernet
-
Compact industrial design, no fan
-
Up to 344 fps at full resolution
-
GigE Vision interface with PoE+
-
Comprehensive I/O control options
-
Automated on-board image correction
-
Stabilized sensor-cooling, no fan
-
Extended operating temperature range
-
Auto gain (manual gain control: 0 to 32 dB)
-
Auto exposure (manual exposure control: 10 µs to 26.8 s)
-
Auto white balance (GT2300C only)
-
Binning (horizontal and vertical)
-
Color correction, hue, saturation (GT2300C only)
-
Column defect masking
-
Decimation X/Y
-
Gamma correction
-
Three look-up tables (LUTs)
-
Region of interest (ROI), separate ROI for auto features
-
Reverse X/Y
-
P-Iris and DC-Iris lens control
-
Event channel
-
Image chunk data
-
IEEE 1588 Precision Time Protocol (PTP)
-
RS232
-
Storable user sets
-
StreamBytesPerSecond (bandwidth control)
-
Stream hold
-
Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
-
Tap mode switchable in Vimba Viewer 2.0 or later (four-tap, one-tap)
-
Temperature monitoring (main board and sensor board)
-
Trigger over Ethernet (ToE) Action Commands

-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT2750) and color (GT2750C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel column masking feature with the Load Defect Tables tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.

-
Sony IMX273 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-158B) and color (G-158C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.

-
IMX273 CMOS sensor
-
ALVIUM image processing
-
USB3 Vision
-
Various hardware options
-
Monochrome (1800 U-158m) and color (1800 U-158c) models
-
ALVIUM® Technology for on-board image processing
-
USB3 Vision interface for GenICam SFNC features
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Micro-B USB 3.1 Gen 1 connector with screw locks for industrial applications
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for both embedded and machine vision applications
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
