Anritsu - MS2024B VNA Master
VNA Master (500 kHz to 4 GHz)
- 2-port, 1-path Vector Network Analyzer (VNA)
- Intuitive Graphical User Interface (GUI) with convenient Touch Screen
- Outstanding calibration stability
- User-defined overlays for viewing multiple S-Parameters
- Exceptional RF immunity
- IF Bandwidth selections of 10 Hz to 100 kHz
- 100 dB Transmission Dynamic Range
- 850 µs/data point sweep speed
- Internal Bias Tee option
- Vector Voltmeter option, ideal for cable phase matching
- Standard three-year warranty (battery one-year warranty)
Touch-Screen Convenience inThe Race for Affordable S-Parameters—Winner: VNA Master
Modern RF/Microwave systems increasingly are pushing their performance to the limits of technology. Designers write tighter specifications on components and define more rigid signal parameters. All of which leaves Field Maintenance Personnel scrambling to find more accurate and yet affordable handheld test equipment. Anritsu introduces industry's most affordable, yet comprehensive solution, the MS2024B VNA Master (500 kHz to 4 GHz). It's a Vector Network Analyzer, it's a Power Meter and it's a Vector Voltmeter. It's tempting to think of the VNA Master as the "Swiss Army Knife of S-Parameters". But that would be wrong because while a SAK does many different functions, it doesn't do any one very well. Whereas the VNA Master does many measurements very well. Error-corrected VNA technology brings modern accuracy to the field S-parameters, external power sensors measure transmit power accurately and the Vector Voltmeter option matches cable phase with great precision.
RF engineers and technicians in the field provide installation and maintenance support for aerospace, defense, and general purpose communication systems around the world. These might typically include radars on Navy ships, communications on Army vehicles, flight-line test on Air Force and commercial jets. They support VHF Omni-directional Range (VOR) antennas in radio navigational systems globally. They will be routinely faced with a wide variety of system elements that can cause failures in the overall system: antennas, cables, filters, multiplexers, amplifiers, isolators, circulators, switches, and other sophisticated elements. The VNA Master, with its new touch-screen display provides the best intuitive measurement control in field diagnostic conditions.
VNA Master, now with standard distance domain (requires firmware version 1.20 or greater), also serves in applications such as the problem of fault location in aircraft and shipboard wire cable bundles that snake through bulkheads and compartments.
|
Option |
Description |
Option Ordering Number |
|---|---|---|
|
Option 10 |
Built-in Variable Voltage Bias Tee |
MS2024B-0010 |
|
Option 15 |
Vector Voltmeter |
MS2024B-0015 |
|
Option 19 |
High Accuracy Power Meter (Requires USB Sensors, sold separately) |
MS2024B-0019 |
|
Option 31 |
GPS Receiver (requires GPS antenna, sold separately) |
MS2024B-0031 |
|
Option 98 |
Z-540 Calibration |
MS2024B-0098 |
|
Option 99 |
Premium Calibration |
MS2024B-0099 |
More Product Information
VNA Master (500 kHz to 4 GHz)
- 2-port, 1-path Vector Network Analyzer (VNA)
- Intuitive Graphical User Interface (GUI) with convenient Touch Screen
- Outstanding calibration stability
- User-defined overlays for viewing multiple S-Parameters
- Exceptional RF immunity
- IF Bandwidth selections of 10 Hz to 100 kHz
- 100 dB Transmission Dynamic Range
- 850 µs/data point sweep speed
- Internal Bias Tee option
- Vector Voltmeter option, ideal for cable phase matching
- Standard three-year warranty (battery one-year warranty)
- SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz.
- Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing.
- SPA available on all ports. User can define which port to use as SPA port.
- Several detection types available in classical mode: Peak, minimum, RMS, Mean.
- Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations.
- Sources and receivers can be independently configured. Can be used as Tracking Generator.
- For units that have a dual source, a dual drive option is available. Support for external source control also possible.
- Phase synchronization for units with Dual source available. This feature allows users to control and configure the phase between the two sources.
- Source and receiver attenuator available with VNA can be activated in SPA mode. Recommendation to use option 62 (with attenuator on receiver side) for measuring the spectrum content of high-power devices.
- Software option: easy to install and upgrade existing user equipment.
The VectorStar ME7838x4 broadband system VNA offers the widest available 4-port single sweep measurements from 70 kHz to 110, 125, 145, and 150 GHz with mmWave bands up to 1.1 THz
- The ME7838E4X 4-port system sweeps from 70 kHz to 110 GHz (Guaranteed specifications)
- The ME7838A4X 4-port system sweeps from 70 kHz to 125 GHz (Guaranteed specifications)
- The ME7838D4 4-port system sweeps from 70 kHz to 145/150 GHz
- The ME7838G4 4-port system sweeps from 70 kHz to 220 GHz
- All systems may be configured to include banded millimeter-wave modules up to 1.1 THz
- Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs
- All systems also supports the 3744x-Rx receiver for noise figure measurements to 125 GHz
- Compact, lightweight mmWave modules offer low cost installation with industry-best performance
- First portable spectrum analyzer to provide continuous frequency coverage to 170 GHz
- Broadband mmWave capabilities for radio astronomy, automotive radar, wireless backhaul, 802.11ad, satcom, and more
- Ultraportable form factor enables measurements right at the device under test
- Measure: channel power, adjacent channel power, occupied bandwidth
- Patented NLTL technology provides > 100 dB dynamic range
- -141/-136/-129/-122 dBm DANL to 90/110/145/170 GHz ( Spectrum Master MS2762A)
- Up to 6 traces, 3 trace detectors, and 12 markers
- Standard three-year warranty
Junkosha’s new mmWave VNA Test Cable Assembly exhibits excellent phase (within +/- 4.5˚ at 50 GHz), and amplitude (within +/- 0.08 dB at 50 GHz) stability in flexure alongside strong phase stability in temperature through its 50 GHz bandwidth, available with NMD connector.
The assembly also displays impressive performance durability, surpassing 40,000 tick tock cycles during testing. The cable is bent 180˚ on a 2.25” radius mandrel with ease, demonstrating superior flexibility and no spring back. A ruggedized port side NMD connector is also available to ensure reliable connections to the VNA.
All-in-One BERT and Sampling Oscilloscope
- Customized built-in 4ch sampling oscilloscope and 4ch BERT
- Fast measurement and high performance shorten test times, improve yields, and cut capital infrastructure costs
- Sampling Oscilloscope
- Fast: 250 ksamples/s to measure 1 Msamples in about 5 s
- High Sensitivity: –15 dBm (typ., SMF)
- Wide bandwidth: 35 GHz (optical, SMF), 25 GHz (optical, MMF), 40 GHz (electrical)
- Low Jitter: 200 fs rms (typ.)
- Both NRZ and PAM4 signal analysis, Supports 53-Gbaud analysis with PAM4
- Built-in 26/53 Gbaud Clock Recovery Unit (CRU) for both NRZ and PAM4
- NRZ Jitter component analysis
- BERT
- Low-Jitter PPG: 600 fs rms (typ.)
- High-sensitivity ED: 25 mV (typ.)
- Sampling Oscilloscope
- Built-in PC for stable fast performance
The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz.
- The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
- All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
- Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
- All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
- Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.
- 1-port VNA with frequency options from 150 kHz to 6 GHz
- External PC control enables control of multiple ShockLine MS46121B devices in parallel for excellent multisite throughput
- Very compact package allows for direct connection to the DUT
- Scalar transmission measurements in a (1-to-1) or (1-to-n) configuration
- No on-board data storage eliminates the need for data purging in secure applications
- Standard bandpass time domain with time gating enables easier and faster fault identification
- A common GUI interface within the ShockLine family reduces switching costs between models
VNA Master (500 kHz to 6 GHz)
- 2-port, 1-path Vector Network Analyzer (VNA)
- Intuitive Graphical User Interface (GUI) with convenient Touch Screen
- Exceptional RF immunity
- 100 dB Transmission Dynamic Range
- Vector Voltmeter option, ideal for cable phase matching
+Spectrum Analyzer (9 kHz to 6GHz)
- Dynamic Range: > 95 dB in 10 Hz RBW
- DANL: –162 dBm (1 Hz)
- Phase Noise: –100 dBc/Hz max @ 10 kHz offset at 1 GHz
- Frequency Accuracy: < ±50 ppb with GPS On
- Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
- PIM Hunting
- Standard three-year warranty (battery one-year warranty)
Anritsu
Since its founding in 1895, Anritsu has been a pioneer in the telecommunications field, marking its 120 years of growth with achievements that include creating the world’ s first practical wireless telephone, which paved the way for today’s smartphones. We would like to express our sincere gratitude to our customers and everyone else who has made this possible.
