Advanced Illumination - SL112 Series Medium Intensity Spot/Coaxial Light
- The SL112 is characterized as a Medium Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
- Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
- The spot light is designed with sufficient thermal management to provide 22kLux at a working distance of 4” (100mm).
- A range of visible wavelengths are available
General Specs
|
Electrical Specifications |
Color |
24V Current |
All Other Controls |
|---|---|---|---|
|
625 |
N/A |
0.11 A Max |
|
|
WHI, 470, 530, 590 |
N/A |
0.28 A Max |
|
|
Normal Operating Temperature |
0 - 60°C |
||
|
Weight |
39.7g (1.4oz) | ||
|
Standard Cable Information |
2 m long -0/+150 mm (80" -0/+6") - 105°C rated PVC jacket, foil shield with drain. |
||
|
Photobiological Risk Factor |
Group 1 (Low-Risk) Applicable Wavelengths: WHI, 470, 530, 590, 625 | ||
|
Compliance |
CE, RoHS, IEC 62471 |
||
|
IP Rating |
IP50 |
||
|
Lumen Maintenance |
L70 = 50,000 Hours |
||
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part Number Key

More Product Information
Advanced Illumination’s AD-I3-CGX2 adaptor cable is for connecting I3/I3S configured lights with Cognex Gen2 Cameras. By default, an I3/I3S controller can connect directly to a Cognex Gen1 Camera but needs this adaptor to connect to a Cognex Gen2 Camera.
- Our Standard Intensity Linear Backlights provide rugged construction for demanding environments.
- Standard intensity illumination with low power input requirements.
- Multiple wavelengths available with very consistent illumination over the entire active area.
- Available in 1” (25mm) increments with lengths up to 80.5” (2044mm).
OptoVue
- Revolutionary technology advancement for wafer and die-level photonics probing
- Real-time in-situ calibrations
- Singulated die testing
- True die-level edge coupling
- In-situ power measurements
- Advanced calibration technologies
- Enables autonomous measurements
Horizontal Die-Level Edge Coupling
- Highest accuracy in test results
- Lowest coupling loss
- Repeatable measurement results due to exclusive automated fiber-to-facet alignment technology
- Reduced risk of damaging fibers with collision avoidance technology
- Ease of use for less experienced users
- Enables close simulation of real-world conditions with device performance closest to the final application
See "Specifications & Details" tab for more key features
With their domed shape, LUMIMAX® LED dome lights generate a diffused light that falls on the test object from all directions, achieving completely shadow-free illumination.
Typical applications are the inspection of reflective or mirroring materials. With a LED dome light, even complex or curved surfaces can be illuminated homogeneously.
LED dome lights are extremely well suited for standard-compliant reading and verification of two-dimensional codes.
- The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
- PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
- Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
- High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
- Single Step and Fast playback mode of test results.
Measurement Accuracy
- Best solution for high accuracy IV/CV, low-noise and 1/f measurements with PureLine, AutoGuard and next generation MicroChamber technologies
- Minimize AC and spectral noise with effective shielding capability
- Achieve unsurpassed RF/mmW measurement and calibration accuracy with integrated RF tools and WinCal
- Shortest signal path test integration for accurate, thermally stable, and low-error data collection
See "Specifications & Details" tab for more key features
- This High Intensity Spot Light is engineered for long throw and high brightness illumination.
- Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
- Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
- Available in a wide range of wavelengths.
- The DF241 is characterized as a Small Low Angle Dark Field ring light.
- Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
- A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator.
- With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view.
- A 25mm field of view is standard with an optional field of view of 35mm.
- Available in a range of wavelengths from UV to IR.
*Engineered to provide comparable optical characteristics to our previous RL1360.
- Part of the MicroBrite™ family of high performance, compact machine vision lights.
- The edge-lit design provides the highest flux density of any backlight in our portfolio.
- Ultra-thin profile for installations with demanding space limitations.
- Available in 3 sizes with a multitude of available wavelengths.
- Base Model numbers include BT050050, BT200100, BT100100
Advanced Illumination
Machine Vision Lighting Solutions



