-
This High Intensity Spot Light is engineered for long throw and high brightness illumination.
-
Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
-
Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
-
Available in a wide range of wavelengths.
Advanced Illumination - SL246 High Intensity Spot Light
General Specs
Group 1 (Low-Risk) Applicable Wavelengths: 455, 470, 505, 530, 590, 625, 660, 730, WHI
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
More Product Information
-
Advanced MicroVac chuck surface for minimum contact resistance between wafer and chuck
-
Safety-rated interlock system for high-power testing (meets EN 60947-5-1, EN 60204-1)
-
Supports fully automated testing up to 10kV by eliminating arcing point
-
Full wafer access via locking roll-out stage
-
On-wafer power device characterization up to 10,000 V DC / 600 A
-
Coaxial, triaxial, and pin jack feed-troughs available
-
Convenient instrument connection kits
-
Load/unload wafer to hot/cold chuck (-60° C to +300° C)
-
Up to 15% faster transition times than other systems in the market
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
-
The RL121 is characterized as a Small High Dispersion Bright Field ring light.
-
Non-lensed LEDs disperse light at broad angles, providing “soft” lighting for applications that require short working distances.
-
The low-profile design is only .56” (14.2mm) thick, allowing it to be used in space constrained applications.
-
Optional adapter rings are available for camera lens mounting.
-
A wide variety of wavelengths are available from UV to IR. An optional polarizer and/or diffuser may be used to further condition the light output.
-
The RL121 delivers 27kLux at a working distance of 50mm.
-
This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package.
-
Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology.
-
Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
-
Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK.
-
1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
-
Re-configurable for DC, RF, mmW, FA, WLR and more
-
Thermal range: -60˚C to 300˚C available
-
Upgrade path to meet your future needs
-
Stable and repeatable measurements over a wide thermal range
-
Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
-
Advanced EMI-shielding with PureLine with AttoGuard technologies
-
Best solution for low-noise and 1/f measurements
-
Minimize AC and spectral noise
-
Minimizes settling times for efficient measurements, without compromising accuracy over full thermal range
-
Locking roll-out stage
-
Innovative microscope remote control
-
Intuitive ergonomic stage controls
-
Quick, safe, and comfortable wafer access
-
Easy on-wafer navigation
-
Fast setup and test data gathering
-
Dedicated Velox version for manual probe stations
-
AugmentedAlign tool with on screen markers for improved RF measurement accuracy
-
The SL147 is characterized as a 2×2 Spot Light with the necessary optics to project light over longer distances.
-
Ideal Illumination for medium working distances.
-
The spot light is available in a very wide range of wavelengths from UV to IR.
-
Diffuser and polarizer options are also available as well as several lens choices.
-
A washdown version is also available as an option.
-
The SL147 provides 88kLux at a working distance of 4” (100mm).
-
Convenient mounting with an M4 nut channel.
-
The Linear Coaxial Light provides a type of diffuse illumination; diffuse light from an internal source is folded downwards along the camera’s imaging axis and onto the imaging plane.
-
High speed machine vision line scan applications receive greater image contrast with a Linear Coaxial Light.
-
The DL110 includes a high efficiency, coated, easy to clean dust cover to protect the beamsplitter.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636