Absolute EMC - Antennas Magnetic
See "Specifications & Details" tab for more information.
|
MAG 1000, 120A/m CW, 1100Am Short Duration, Power Frequency Magnetic Field |
|---|
|
1-120A/m Contiunus testing |
|
100-1100A/m Short Duration 1-3sec |
|
Test either 50Hz & 60Hz Selectable |
|
1m square Loop |
|
Coil Set 4-39_9k-150k EN 61000-4-39 & RS101 9kHz - 150kHz, Tx & Rx Set |
|---|
Low-Frequency Transmit Coil (CAB4-3912) |
|
Frequency: 9 kHz to 150 kHz |
|
Main Diameter: 120 mm |
|
Maximum Current: 15 A |
|
Number of turns: 20 |
Low-Frequency Sense Coil (CABLSLF) |
|
Frequency: 9 kHz to 150 kHz |
|
Diameter to center of the coil: 40 mm |
|
Number of turns: 51 |
|
Wire type: 7/41 LITZ |
|
Winding Type: Electrostatically shielded |
|
MF EASY, DC-400 kHz, MAGNETIC FIELD EXPOSURE ASSESSMENT SYSTEM |
|---|
|
The MF EASY is a scalable and flexible multichannel measurement and assessment system for magnetic fields in the frequency range DC – 400 kHz. It is available with 5 or 10 (on request up to 15) fully isotropic measurement channels enabling simultaneous magnetic field measurements on 5 or 10 (15) measurement positions. Different standard probe types (sizes and shapes) are available for the MF EASY. Customized probes are available on request. Iso-centrically arranged coil and Hall sensor enable a measurement frequency range from DC to 400 kHz and a measurement sensitivity suitable for assessing human exposure. |
|
Coil Set 4-39_150k-26M EN 61000-4-39, 150 kHz - 26 MHz, Tx & Rx Set |
|---|
High-Frequency Transmit Coil (CAB4-3910) |
|
Frequency: 150 kHz to 26 MHz |
|
Main Diameter: 100 mm |
|
Number of Turns: 3 |
|
Wire Diameter: 1mm |
|
Connection type: ‘N’ type Coaxial |
High-Frequency Sense Coil (CABLSHF) |
|
Frequency: 150 kHz to 26 MHz |
|
Diameter to center of the coil: 41 mm |
|
Number of turns: 1 |
|
Wire type: 1mm single core |
|
Winding Type: Electrostatically shielded |
|
Coupling Network for 134kHz |
|
It matches 50 Ohm amplifier |
|
Use with CAB4-3912 loop antenna |
|
Can work with other similar antennas |
|
Type N f-n connectors attached directly to loop |
|
Coupling Network for 13.56 MHz |
|
It matches 50 Ohm amplifier |
|
Use with CAB4-3910 loop antenna |
|
Can work with other similar antennas |
|
Type N f-n connectors attached directly to the loop |
|
The circular transmitting loop antenna |
|
0.01 - 120 MHz |
|
diam. 100 mm |
|
turns 3 |
|
BNC Connectors |
|
Wideband Precision (9 kHz – 30 MHz): Delivers ±1 dB antenna factor stability across the full frequency range. |
|
Long-Life, Low?Noise Operation: Internal NiMH battery pack provides >12 hours of noise-free measurements. |
|
Dual-Field Capability: Supports both magnetic (–31.5 dB Ω·m) and “fictive” electric (20 dB/m) field measurements with one probe. |
|
Rugged, User-Friendly Design: Milled aluminum housing with LED overload indicator and versatile tripod or handle mounting. |
|
8 kHz – 30 MHz Wideband: Delivers ±1 dB antenna-factor accuracy across the full spectrum. |
|
Dual-Mode Measurement: 20 dB/m (E-field) and –31.5 dB Ω·m (H-field) in one compact probe. |
|
Long-Life Battery Operation: NiMH pack provides over 12 hours of low-noise, mains-free measurements. |
|
Overload Protection: Built-in LED indicator alerts you at the 1 dB compression point. |
|
Magnetic, handheld coil |
|
10 kHz - 3 MHz |
|
diam. 133 mm |
|
turns 9 |
|
Immunity testing to VG 95377 Part 13 |
|
Magnetic, handheld coil |
|
DC - 150 kHz |
|
diam. 120 mm |
|
turns 20 |
|
Immunity testing to: ISO 11452-8, MIL 461E RS101, EN 55103 5.18.3.2, IEC 61000-4-39 |
|
FESP 5133 - DC - 200 kHz Radiating Loop |
|---|
|
Magnetic, handheld coil |
|
DC - 200 kHz |
|
diam. 133 mm |
|
turns 36 |
|
Immunity testing to MIL 461, EN 55103 - 2 A.2.1 b), EN 55103 - 2 A.4.1 |
|
Magnetic, handheld coil |
|
DC - 50 kHz |
|
diam. 126 mm |
|
turns 225 |
|
Immunity testing to Measuring Method SF 01 G acc. to VG 95377 |
|
Magnetic, handheld coil |
|
DC - 300 kHz |
|
diam. 500 mm |
|
turns 20 |
|
Immunity testing to EN 55103 - 2 A.3.1 |
|
The Loop Antenna Stand is an advanced antenna support device designed to meet the demands of diverse signal requirements, featuring three primary functions: elevation adjustment, horizontal/vertical orientation, and a 180-degree rotation capability. |
|
Magnetic field monitoring loop |
|
10 - 160 kHz |
|
Diam. 133mm |
|
turns 360 |
|
Emissions testing |
|
Compensation Network |
|
For HFRA 5164 |
|
up to 26 A/m @ 50 Watts |
|
13.56 MHz |
|
3D DC Magnetic Field Sensor Head |
|
Measuring range: typ. max. ± 100mT |
|
Use with HS 3D-Control |
|
Nominal frequency range: DC - 1 kHz |
|
Nominal measuring range: 0 - 7000 A/m |
|
Extended measuring range: 0 - 9000 A/m |
|
Nominal conversion factor: 1 (A/m)/mV |
|
HFRA SF02G - 0.01 - 30 MHz Transmitting Tunable loop antenna |
|---|
|
10 kHz to 30 MHz |
|
acc. to VG95373-13:2008-11 and VG95373-23:2008-11. Including sensor loop HFRAE 5163 and control cable. |
|
diam. 500 mm |
|
2 Turn |
|
16 Watts |
|
Magnetic field monitoring loop |
|
10 - 250 kHz |
|
Diam. 133mm |
|
turns 36 |
|
Emissions testing |
|
Magnetic field monitoring loop |
|
5 - 250 kHz |
|
Diam. 40mm |
|
turns 51 |
|
The level setting for Immunity testing to MIL-STD-461 |
|
Meets requirements of Stellantis CS.00244 2023 ELECTRICAL AND EMC PERFORMANCE REQUIREMENTS FOR E/E COMPONENTS |
|
Magnetic field monitoring loop |
|
10 - 400 MHz |
|
Diam. 40mm |
|
turns 1 |
|
Level setting for Immunity testing to IEC 61000-4-39 |
|
Electromagnet |
|
DC |
|
Diam. 335mm |
|
turns 2000 |
|
Circular Helmholtz Coil |
|
DC - 5 MHz |
|
Diam. 120mm |
|
turns 6 |
|
Circular Helmholtz Coils |
|
DC - 2.5 MHz |
|
Diam. 232mm |
|
turns 9 |
|
Circular Helmholtz Coils |
|
DC - 200 kHz |
|
Diam. 120mm |
|
turns 98 |
|
Circular Helmholtz Coils |
|
DC - 300 kHz |
|
Diam. 232mm |
|
turns 81 |
|
Circular Helmholtz Coils |
|
DC - 500 kHz |
|
Diam. 400mm |
|
turns 12 |
|
Circular Helmholtz Coils |
|
DC - 150 kHz |
|
Diam. 400mm |
|
turns 36 |
|
Circular Helmholtz Coils |
|
DC - 800 kHz |
|
Diam. 600mm |
|
turns 8 |
|
Circular Helmholtz Coils |
|
DC - 500 kHz |
|
Diam. 600mm |
|
turns 16 |
|
Circular Helmholtz Coils |
|
DC - 30 kHz |
|
Diam. 600mm |
|
turns 132 |
|
Square Helmholtz Coils |
|
DC - 150 kHz |
|
Diam. 1.0m |
|
turns 10 |
|
Square Helmholtz Coils |
|
DC - 10 kHz |
|
Diam. 1.0m |
|
turns 100 |
|
Square Helmholtz Coils |
|
DC - 10 kHz |
|
Diam. 1.0m |
|
turns 100 |
|
Square Helmholtz Coils |
|
DC - 150 kHz |
|
Diam. 1.2m |
|
turns 10 |
|
Square Helmholtz Coils |
|
DC - 20 kHz |
|
Diam. 1.3m |
|
turns 50 |
|
Square Helmholtz Coils |
|
DC - 5 kHz |
|
Diam. 1.3m |
|
turns 100 |
|
Square Helmholtz Coils |
|
DC - 100 kHz |
|
Diam. 1.5m |
|
turns 10 |
|
Square Helmholtz Coils |
|
DC - 6 kHz |
|
Diam. 1.5m |
|
turns 100 |
|
Square Helmholtz Coils |
|
DC - 100 kHz |
|
Diam. 1.8m |
|
turns 10 |
|
Square Helmholtz Coils |
|
DC - 5 kHz |
|
Diam. 3m, full vehicle |
|
SAE J551-17 |
|
Turns 100 |
|
Three-Dimensional Helmholtz Coil |
|
DC - 20 kHz |
|
Diam. 1.3m |
|
turns 50 |
|
Compensation Network |
|
For: HHS 5206-16, HHS 5204-12, HHS 5202-9 |
|
up to 32 Arms |
|
DC - 200 kHz |
|
Low inductive precision high power shunt |
|
1 x 0.25 Ohm / 800 W |
|
1 x 1 Ohm / 800 W |
|
2 x 0.5 Ohm / 400 W |
|
Use for many applications including meeting MIL-STD-461 requirements |
|
CP 9610 - DC - 1 MHz Galvanically Isolated Current Sensor |
|---|
|
Galvanically Isolated Current Sensor |
|
It can be used to measure currents in case a shunt is not allowed (Ford EMC-CS- 2009), including 1m RG223/U BNC-BNC |
|
DC – 1 MHz |
|
210 VPK / VDC |
|
-40 A - +40 A |
|
NFCN 9731-100, DC- 180 Hz Compensation Network for HHS 5230-100 |
|---|
|
Compensation Network |
|
For HHS 5230-100 |
|
up to 8 Arms |
|
DC - 180 kHz |
|
NFCN 9732-85, 80 - 90 kHz Compensation Network for HHS 5206-8 |
|---|
|
Compensation Network |
|
For HHS 5206-8 |
|
up to 11 Arms |
|
80 - 90 kHz (85 kHz) |
|
NFCN 9732-120, 50-60 Hz, Compensation Network for HHS 5210-100 |
|---|
|
Compensation Network |
|
For HHS 5210-100 |
|
up to 151 Arms |
|
50 - 60 Hz |
|
Square Helmholtz Coils |
|
DC - 6 kHz |
|
Diam. 1.5m |
|
turns 100 |
|
20A Continuous, 40A 5min |
|
Coil Set 14708-7, Test set for testing to ISO 14708-7 A/B levels |
|---|
|
LF Transmit Coil (CABTL16 & CABTL11) |
|
Frequency: 16.6 Hz - 27MHz |
|
2 loop sets |
|
Meets ISO 14708-7 Criteria A and High B levels |
|
Use 100 Watt Audio amplifier up to 35kHz |
|
Use 150 Watt 50Ohm amplifier 25 kHz - 27 MHz |
|
Magnetic field monitoring loop |
|
10 - 200 kHz |
|
Diam. 133mm |
|
turns 36 |
|
Emissions testing |
|
Circular Helmholtz Coils |
|
DC - 2 kHz |
|
Diam.: 256mm |
|
Turns: 536 |
|
HS 3D-SENS50T1 3D DC magnetic field sensor head |
|---|
|
3D DC Magnetic Field Sensor Head |
|
Measuring range: typ. max. ± 50mT |
|
Use with HS 3D-Control |
|
Ideal to use to measure ambient magnetic field for DO-160 Section 15 |
|
Display and control for 3D DC Magnectic Field Sensor Head |
|
Measuring range: typ. max. ± 50mT or 120mT |
|
16 Hour battery life |
|
9 kHz - 30 MHz |
|
Loop Diameter 150 mm |
|
Type N (female) |
|
Handheld magnetic field meter |
|
150 kHz - 400 MHz |
|
Shown short Version |
|
Isotropic H-Field Antenna |
|
Rohde und Schwarz handheld spectrum analyser FSH or the TS-EMF System. |
|
9 kHz - 200 (300) MHz |
|
Lightweight low attenuation radome |
|
Outer diameter ca. 150 mm |
|
Loop Antenna System ( LAS ) |
|
3-dimensional large loop antenna |
|
diam. 2 m |
|
acc. EN 55015 / CISPR 15 |
|
Socket and Coaxial switch recommended |
|
Loop Antenna System ( LAS ) |
|
3-dimensional large loop antenna |
|
diam. 3 m |
|
acc. EN 55015 / CISPR 15 |
|
1 - 300 MHz |
|
diam. 50 mm |
|
1 Turn |
|
Transformer |
|
0.07 - 120 MHz |
|
diam. 100 mm |
|
1 Turn |
|
Transformer |
|
0.05 - 30 MHz |
|
diam. 250 mm |
|
1 Turn |
|
Transformer |
|
13.56 MHz 370 kHz Bandwidth |
|
diam. 250 mm |
|
2 Turn |
|
16 Watts |
|
0.009 - 400 MHz |
|
diam. 50 mm |
|
1 Turn |
|
Transformer |
|
Circular Transmitting Loop Antenna |
|
diam. 180 mm |
|
1 turn |
|
HFRA 5149 - 0.009 - 30 MHz Transmitting Tunable loop antenna |
|---|
|
The circular transmitting loop antenna |
|
9 kHz - 30 MHz |
|
diam. 500 mm |
|
including 50 Ohm 20 Watt termination |
|
N-connectors |
|
The circular transmitting loop antenna |
|
DC - 3 MHz |
|
diam. 250 mm |
|
BNC Connectors |
|
The circular transmitting loop antenna |
|
DC - 30 MHz |
|
diam. 180 mm |
|
BNC Connectors |
|
The circular transmitting loop antenna |
|
0.1 - 30 MHz |
|
diam. 100 mm |
|
Transformer to 50 Ohms |
|
BNC Connectors |
|
The circular transmitting loop antenna |
|
0.1 - 100(300) MHz |
|
diam. 50 mm |
|
Transformer to 50 Ohms |
|
BNC Connectors |
|
The circular transmitting loop antenna |
|
DC - 5 MHz |
|
diam. 50 mm |
|
turns 10 |
|
BNC Connectors |
|
HFRA 5157- DC - 30 MHz Transmitting loop antenna |
|---|
|
The circular transmitting loop antenna |
|
DC - 20 (30) MHz |
|
diam. 100 mm |
|
turns 2 |
|
BNC Connectors |
|
The circular transmitting loop antenna |
|
DC - 2 MHz |
|
diam. 180 mm |
|
turns 10 |
|
BNC Connectors |
|
The circular transmitting loop antenna |
|
DC - 400 kHz |
|
diam. 250 mm |
|
turns 28 |
|
BNC Connectors |
|
The circular transmitting loop antenna |
|
DC - 30 MHz |
|
diam. 100 mm |
|
turns 1 |
|
BNC Connectors |
|
DC - 10 MHz |
|
1-meter square |
|
turns 1 |
|
Immunity testing to IEC 61000-4-8, IEC 61000-4-9 and IEC 61000-4-10 |
|
DC - 10 MHz, 400A Cont. 600A 10min |
|
up to 1200A/m 5sec with MFPO 9760 |
|
1-meter square |
|
turns 1 |
|
Immunity testing to IEC 61000-4-8, IEC 61000-4-9 and IEC 61000-4-10 |
|
Current Transformer for IEC 61000-4-8 AC magnetic fields |
|
50 or 60 Hz Feed |
|
Produce 1000A/m short duration testing (pulse generator) |
|
up to 400A continuous |
|
Includes stand for separately sold FESP 5410-1 |
|
Magnetic Compass with better than 1deg Accuracy |
|
Magnetometer HS 3D-SENS50T1 Hall-Sensor |
|
Zero-Gauss Chamber |
|
Flexible Measuring tape, Non-Mitalic |
|
EPS Foam Support for Compass |
|
Transit Case for easy storage |
More Product Information
TM MAESTRO provides a comprehensive and centralized solution for monitoring and controlling telemetry infrastructure worldwide.
Designed to meet the critical needs of telemetry operators, this software offers a user-configurable GUI that adapts to various user profiles and mission phases, from preparation to live flight tests and station maintenance. TM MAESTRO is scalable and easily accommodates new telemetry equipment, allowing for the addition of an unlimited number of components, from antennas to decommutators, making it a highly flexible system.
EMC test equipment to evaluate the resistibility of electronic devices and components when energy charged on a human body or object is discharged to the electronic devices and components. NoiseKen brand ESD simulator is available to see malfunctions or function declines of electronic equipment for appropriate evaluations compliant with IEC 61000-4-2 Ed.2 Test Standard, ISO 10605 Ed.2 Test Standard & ISO 10605 Ed.3 Test Standard.
The ESS-S3011A features a function which enables the user to pre-program test settings to minimize setup errors as well as having the unit be incorporated into a remote or autonomous testing setup. Another feature that sets apart NoiseKen ESD guns to that of competitors is the discharging gun separation design which helps achieve the lightweight.
For conventional ESD guns, that have generators that are inseparable from the gun, you may experience having to replace the whole unit even only when certain parts of the unit are broken. However, with the NoiseKen’s separation design, replacement parts can be minimized to lower the running cost.
Description: Phosphate Ester Compliant (Skydrol), 50 GPM, 3000PSI, 75HP, 480VAC, 3PH, 60Hz Electric Motor, Pressure Comped, Positive Displacement Pump, 3 Micron Absolute Filter, Air to Oil Heat Exchanger, 100 Gal. SS Reservoir, 5-50 Flow Motor., 0-5000 PSI Gauges, Pump Pressure Control
Quantity in Stock: 1
- Piezo stages with continuous 360° rotary motion
- Mounted mirrors, laser and two-axis base
- Each rotary stage only 11.75 x 21.9 x 16 mm
- Closed-loop controller embedded in each stage
- No separate electronics needed
- 3.3 VDC input
- Direct digital input of motion commands ( I2C, SPI, or UART)
- Angular resolution ~21.9727 mdeg closed loop
- Built-in absolute position sensor
- Millisecond step and settle times
- 0.5 deg in 16 ms closed loop
- 0.5 deg in 1.2 ms open loop
- Holds position with zero power and no jitter
The SPARTE 300 series antenna is a battle-tested product that has consistently delivered top-tier performance for mission-critical applications where reliable telemetry reception is paramount. This rugged antenna guarantees our customers the utmost precision, a long operational life, and straightforward maintenance.
The SPARTE 300 series opens up a world of possibilities for users, ranging from aircraft tracking and high-speed target monitoring to duplex datalinks with both receiving and transmitting capabilities.
Furthermore, the extensive and customizable input/output options empower users to operate multiple antennas in a coordinated, multi-site tracking setup. With all antennas, regardless of size, being effortlessly monitored, managed and controlled by using our TM Maestro software.
Absolute EMC
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
Contact Details
Absolute EMC LLC
8240 Rugby Road, Manassas Park VA 20111, USA
Phone: 585-924-4450
Email: info@absolute-emc.com
Test & Measurement
Download Line Card
