Teledyne DALSA - Prime BSI Express
- Backside sensor illumination
- 95% quantum efficiency
- 95 frames per second
- 6.5 μm pixels
- 1.0 e- read noise
- Compact form factor, ideal for integration
- High dynamic range
- Programmable scan mode to control camera readout
The Prime BSI Express sCMOS is a compact yet powerful imaging solution, offering high-resolution and sensitive imaging at high speeds, achieving 95 fps across USB 3.2 Gen 2. All this with a compact design for easy integration, the Prime BSI Express offers high-speed imaging even at low signal levels.
Sensitivity
The Prime BSI Express sCMOS camera has 95% quantum efficiency and low 1.0 e⁻ read noise for high sensitivity at over 40 frames per second. The combination of high signal collection and low noise results in excellent performance for low-light imaging.
Compact Form Factor
The Prime BSI Express is a compact 78 mm x 78 mm x 90 mm with optimized cooling for the size, ideal for integration into new or existing configurations.
Interface and Integrate
The Prime BSI Express has easy USB 3.2 Gen 2 connectivity and a standard PVCAM driver for quick, painless setup in software.
Key Specs
|
Field of View |
19 mm diagonal |
|---|---|
|
Read Noise |
1.0 e⁻ |
|
Frame Rate |
95 fps |
Specifications
|
Highlighted |
|
|---|---|
|
Resolution |
2048 x 2048 |
|
Megapixels |
4.1 |
|
Max Frame Rate Standard |
95 fps |
|
Max Line Rate |
5.1 µs |
|
Sensor Model |
GPixel Gsense 2020BSI |
|
Pixel Size |
6.5 µm |
|
Sensor Type |
CMOS |
|
Sensor Diagonal |
18.7 mm |
|
Shutter type |
Rolling Shutter |
|
Spectrum |
200–1100 nm |
|
Color/Mono |
Mono |
|
Lens Mount |
C - Mount |
|
Physical |
|
|---|---|
|
Cooling |
0 °C at 25 °C ambient |
|
Digitization Bit Depth (ADC) |
12-bit, 16-bit |
|
Dimensions [W x H x L] |
78 x 78 x 88 mm |
|
Field of View |
13.3 x 13.3 mm |
|
Mass |
0.76 kg |
|
Mounting |
One ¼"–20 thread per side |
|
Operating Humidity |
0 to 80% (non condensing) |
|
Operating Temperature |
0 to 30 °C |
|
Power Supply |
12 V DC, 8 A |
|
Storage Humidity |
0 to 90% (non condensing) |
|
Storage Temperature |
–20 to 60 °C |
|
Compliance & Certifications |
|
|---|---|
|
Certification |
CE, UL, CUL, FCC, PSE Efficiency level VI |
|
Warranty |
3 Years |
|
Features |
|
|---|---|
|
Acquisition Modes |
200 MHz 12-bit (Sensitivity, Balanced, Full-Well), 100MHz 16-bit (HDR, CMS), Pseudo-Global Shutter, Programmable Scan Mode |
|
Triggering Modes |
Input (Trigger-First, Edge, SMART Streaming), Output (Any Row, First Row, Line Output), Effective Global Shutter (Rolling Shutter), Expose Out |
|
Performances |
|
|---|---|
|
Conversion Gain |
3.6 (12-bit Full Well), 2.5 (12-bit Balanced), 1.1 (12-bit Sensitivity), 0.64 (16-bit HDR), 0.28 (16-bit CMS) |
|
Dark Current |
1.5 e⁻/p/s |
|
Dynamic Range |
25000 : 1 |
|
Full Well Capacity (Qsat) |
45,000 e⁻ |
|
QE (Mono) |
95% |
|
Read Noise |
1.0 e⁻ |
|
Sensor Material |
Silicon |
|
Recommended System Configuration |
|
|---|---|
|
Accessories (Included) |
USB 3.2 10 Gbps Card and Cable, Power supply, Trigger cable, Manual, Quick Installation Guide |
|
CPU |
3.0 GHz or faster Intel Processor, 4 or more cores |
|
Hard Drive |
m.2 NVME SSD |
|
OS |
Windows 7, 8, 8.1, 10, 11 (64 bit) |
|
Port |
USB 3.2 10 Gbps |
|
RAM |
>8 GB DDR3 |
More Product Information
- >95% quantum efficiency
- 10 μm pixel size
- 1 megapixel image array EMCCD
- eXcelon™3 technology
- Ultra-high-speed readout and spectra-kinetics
-
Highest resolution – 12 bits all the time
-
More channels, flexibility – 8 analog and 16 digital channels
-
Longest Memory – 5 Gpt records with simple navigation – no compromise
-
View 16 channels on one display with OscilloSYNC™
-
Powerful, deep toolbox enables and simplifies complex analysis
-
MAUI with OneTouch user interface for intuitive and efficient operation
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
PyLoN® cameras are setting the standard for sensitivity and flexibility in scientific spectroscopy. Cryogenic cooling delivers ultralow dark current ≤1 e⁻/pixel/hour. Flexible CCD sensor architecture supports multiple readout ports to adapt to low signal and high dynamic range experimetns. PyLoN sensors are also featuring Teledyne's patented excelon technology to eliminate fringing and maximize sensitivity.
- 120 – 1100 nm sensitivity
- -120℃ cryogenic cooling
- 50 kHz – 4 MHz readout speeds
- Ultra low noise
- Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
- Automatic probe detection
- Provides all necessary power and offset control to the attached probe
- Supports probes up to 4 GHz
- Easy firmware updates
- Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
- S-parameters DC to 40 GHz, single-ended and mixed-mode
- Impedance Profile with <1 mm resolution, differential and common-mode
- Internal, automatic OSLT calibration
- USB-connected, small, lightweight
- Flexible display of the measurements
- Remove effects from fixtures, connectors and cables
- Emulate eye diagrams with CTLE, DFE and FFE equalization
- Advanced jitter analysis
- 4096 x 4096 sensor format
- 61.4 x 61.4 mm imaging area
- Read noise as low as 2.0 e- rms
- 18-bit digitization
- Up to 4 MHz readout (quad port)
- ArcTec™ technology for maximum deep cooling
- Up to 65 GHz
- Up to 80 Channels @ 36 GHz
- Up to 160 GS/s
- Up to 512 Mpts/Ch
- 50 fs rms Sample Clock (Intrinsic) Jitter
- Jitter Between All Channels of <130 fs rms
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
