Test & Measurement
Download Line Card
Document
Products
-
Available in 5MHz, 10MHz, 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models
-
1 channel (5 & 10MHz) or 2 channel (30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz & 500MHz) options available
-
Max Sampling rate of 125 Msa/s (5MHz & 10MHz), 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models
-
Up to 16-bit vertical resolution (14-bit on 5MHz, 10MHz, 30MHz & 60MHz models)
-
3.5" (5MHz & 10MHz) and 4.3" Touchscreen (30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz & 500MHz) available
-
Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM)
-
150 MHz, 2 analog channels
-
8 synchronized digital channels (T3AWG2152-D only)
-
16-bit vertical resolution
-
128 MPts @Ch waveform memory
-
Max sampling rate of 600 MS/s
-
Available in 250 MHz and 350 MHz models.
-
2, 4 and 8 channel modes.
-
16-bit vertical resolution.
-
Max Sampling rate of 1.2 GS/s.
-
Max sinewave frequency of 250 MHz and 350 MHz respectively.
-
Up to seven operating modes: T3EL15060P & T3EL50015P - CC, CV, CR, CP, CC + CV, CR + CV, CP + CV. T3EL150302P & T3EL150303P – CC, CV, CR, CP.
-
Static, Dynamic and Sequence mode support.
-
Built in Application Functions: T3EL15060P & T3EL50015P - Soft Start, Battery Test Automation, OCP and OPP Test Automation. T3EL150302P & T3EL150303P – Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test.
-
Provides a load of up to 300 Watts.
-
Programmable and analog external control.
-
All Digital IF technology
-
10.1” WVGA (1024 x 600) Display
-
Frequency range from 9 KHz up to 3.2 GHz
-
-161 dBm/Hz Displayed Average Noise Level (Typ)
-
-98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
-
Total Amplitude Accuracy < 0.7 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
Comes with standard Preamplifier and Tracking Generator Kits.
-
Optional Reflection/VSWR, Advanced Measurement Kit and EMI Pre-compliance measurement kits.
-
True Differential TDR with <3mm Spatial Resolution
-
Small Form Factor and Battery Powered
-
S Parameters up to 15 GHz
-
35 ps Rise Time (T3SP15D) 50 ps (T3SP10D)
-
Up to 50,000 points long memory
-
Emerging Serial Data Standards Testing
-
Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
-
Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
-
-156 dBm/Hz Displayed Average Noise Level (Typ.)
-
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
-
Total Amplitude Accuracy < 1.2 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
All-Digital IF Technology
-
Standard Preamplifier
-
Distance to fault capability using VNA time domain analysis
-
Up to 1.5 GHz Tracking Generator Kit
-
Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
-
EMI Pre-compliance Test Kit (Opt.)
-
10.1 lnch WVGA (1024 x 600) Display
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-ended Active Probes
-
Differential Active Probes
-