Easy to Use No need to break the circuit or insert a shunt Small form factors for use on crowded boards Variety of Applications

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point

Highest resolution - 12 bits all the time  Bigger Display, smaller footprint, most bench space  More capability, increased productivity

High voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.

The PPE6KV-A and HVP120 can handle up to 6000 Vpeak transient overvoltages and are designed for probing up to 2000 Vrms and 1000 Vrms respectively. Fast rise times, excellent frequency response, and a variety of standard accessories make these probes safe and ideal for high voltage measurement applications

Up to 65 GHz  Up to 80 Channels @ 36 GHz  Up to 160 GS/s  Up to 512 Mpts/Ch  50 fs rms Sample Clock (Intrinsic) Jitter  Jitter Between All Channels of <130 fs rms

Static power analysis - like a dedicated power analyzer  Dynamic power analysis – capture more information  Complete test coverage – control system, power section, motor  Comprehensive mechanical interface  Harmonics calculation option  Vector display option (THREEPHASEVECTOR)  Waveform Transformations option (THREEPHASEdq0)  16 Channels with OscilloSYNC™

DigRF v4 Decodes  Low-speed (26 Mb/s)  Medium-speed (1248 Mb/s)  High-speed (1456 Mb/s)  DigRF v3 Decodes  Low-speed (6.5 Mb/s)  Medium-speed (26 Mb/s)  High-speed (312 Mb/s)  Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms  Correlate analog waveforms with protocol decode on one screen  View decoded data in hexadecimal format  Decode information expands as the time base is adjusted or zoomed  Convenient table display with quick “Zoom to byte” capability  Quick search capability for specific message packets

Compact probe head Supports fine pitch SMD probing Rugged, Sharp tip HF optimized connection accessories Over 30 accessories

Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.

Provides a passive PCIe® backplane for test applications  Self-contained, portable and self-powered  Supplies power for +3.3V, +3.3Vaux and +12V rails  Generates PCIe reference clock  Accepts external clock inputs  Generates valid PERST# bus reset that can be activated by manual push button  Includes two mid-bus probe footprints for traffic monitoring  Supports two PCIe x16 sockets which accept cards of any link width (x1, x4, x8, x16)  Provides indication of valid connection of PRSNT1# and PRSNT2# lines for each card  Supports data rates of 2.5 GT/s and 5.0 GT/s

Available in 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models All models feature 2 channels Max Sampling rate of 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models. Up to 16-bit vertical resolution (14-bit on 30MHz & 60MHz models). All models have 4.3" Touchscreens. Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM)