Teledyne DALSA - BOA2 High Resolution Smart Camera for Industrial Automation
- High resolution global shutter CMOS sensor
- 3 resolution models – 2M, 3M and 5M
- Dual core 1.5 GHz processor
- Embedded application software
- Ease-to-use setup for new vision adopters
- Built-in vision capabilities for most applications
- Standard factory protocols (EthernetIP, Modbus, Profinet)
- Operator interface flexibility
- Gigabit Ethernet and RS232 communications
- Isolated I/O and direct lamp connections
- Integrated ring light (optional on 2M version only)
- IP67 enclosure with lens cap
- Convenient mounting options
- Standard M12 cables
BOA2 is a complete vision system in one smart camera. Featuring our highest smart camera resolution yet, BOA2 combines image capture, on-board processing, and easy-to-use embedded vision software into a convenient single device with a variety of I/O and mounting options.
Built for industry, made for end users. That's one smart camera.
Introducing BOA2: a complete vision system in one smart camera. Featuring our highest smart camera resolution yet, BOA2 combines lighting, image capture, processing, and easy-to-use embedded vision software into a convenient single device with a variety of I/O and mounting options.
More pixels.
BOA2 uses advanced CMOS global shutter sensors with resolutions up to 5 megapixels to capture more detail in a larger inspection area. Superior image resolution allows BOA2 to capture the smallest defects that lower resolution sensors miss.
More power.
Each BOA2 smart camera is powered by a dual-core 1.5 GHz processor that drives the embedded iNspect Express vision software. This easy-to-use software features a robust tool set to enable common inspection tasks, including:
- Pattern Matching
- Precision Measurements
- Flaw Detection
- Verification
- Presence/Absence of features
- Robot Guidance
- Part Identification
- 2D matrix Reading
- Barcode Reading
- Optical Character Recognition
Features
Precise Measurement
- With the superior resolution of the BOA2, more pixels means higher measurement accuracy.
Defect detection
- BOA2's high resolution sensor enables detection of smaller defects that could be missed by low resolution cameras.
Verification
- Available resolutions up to 5 megapixels allow for a larger area to be inspected at once.
Integrated lighting
- BOA2 (XA2 model only) offers an optional integrated high-intensity ring light for compact, uniform target illumination.
Family Specifications
|
Camera Type |
Area Scan |
|---|---|
|
Sensor Technology |
CMOS |
|
Supported Interfaces |
RS232, Fiber Optic |
|
Spectrum Capability |
Visible (400-700 nm) |
Model
|
Model Number |
Resolution |
Spectrum |
Interface |
Pixel Size (μm) |
FPS |
|---|---|---|---|---|---|
|
1664 x 1216 |
Mono |
Ethernet 1 Gbps |
5 |
20 |
|
|
1920 x 1440 |
Mono |
Ethernet 1 Gbps |
5 |
15 |
|
|
2560 x 2048 |
Mono |
Ethernet 1 Gbps |
5 |
10 |
Document
More Product Information
- 150 MHz, 2 analog channels
- 8 synchronized digital channels (T3AWG2152-D only)
- 16-bit vertical resolution
- 128 MPts @Ch waveform memory
- Max sampling rate of 600 MS/s
Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.
Capture, Process, Control at the Edge
- Resolutions 1.2 to 12 megapixels
- Quad-core processor
- Broad range of onboard I/O
- Compact, rugged, IP67 enclosure
- Run AI inspection models on-camera
- No-code machine vision development
- Up to 4 GHz Bandwidth
- ±60 V Offset Capability
- ±800 mV Dynamic Range
- 50 kΩ DC Input Impedance
- 1.2x Attenuation for low additive noise
- MCX terminated cable with wide variety of connections:
- Solder-in (4 GHz)
- Coaxial Cable to U.FL receptacle (3 GHz)
- MCX PCB Mount (4 GHz)
- Browser (500 MHz)
- ProBus Interface
- 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
- Up to 4 GS/s sample rate
- Long Memory – up to 20 Mpts
- 10.1” capacitive touch screen display
- 16 Digital Channel MSO option
- MAUI - Most Advanced User Interface
- Designed for Touch
- Built for Simplicity
- Made to Solve
- Advanced Anomaly Detection
- Fast Waveform Update
- History Mode - Waveform Playback
- WaveScan - Search and Find
- Multi-Instrument Capabilities
- Protocol Analysis - Serial Trigger and Decode
- Waveform Generation - Built-in Function Generator
- Digital Voltmeter and Frequency Counter
- Future Proof
- Upgradeable Bandwidth
- Field Upgradable Software and Hardware Options
- Uses standard PC Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e or CAT-6)
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
- 5 GigE Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e, CAT-6) or (4T-6A)
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
- 500 MHz - 4 GHz bandwidths
- Up to 40 GS/s sample rate
- 15.4” capacitive touch screen
- MAUI with OneTouch
- Powerful, Deep Toolbox
- Exceptional Serial Data Tools
- 16 digital channels with 1.25 GS/s
- Huge Applied Offset Range
- Optional Application Packages
Teledyne DALSA
Teledyne DALSA is an international leader in high performance digital imaging and semiconductors with approximately 1000 employees world-wide. Established in 1980 and acquired by Teledyne Technologies in 2011, Teledyne DALSA designs, develops, manufactures, and markets digital imaging products and solutions, in addition to providing semiconductor products and services. Our core competencies are in specialized integrated circuit and electronics technology, software, and highly engineered semiconductor wafer processing.
Teledyne DALSA exists for the long term. Our goal is to build upon our 30 year heritage of developing the world's leading high performance digital imaging and semiconductor solutions and to accelerate our level of innovation. We focus on R&D development but also draw on the capabilities available to us as part of a larger organization. We seek to deliver products and technology that are truly innovative so that we can help our customers succeed.
Contact Details
Teledyne DALSA Headquarters
605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9
Phone: 519-886-6000
Fax: 519-886-8023
Imaging/Machine Vision
Download Line Card
Document
