-
Our High Intensity Linear Backlights offer 510 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input
Junkosha - 1 Series cables - Wide Temperature Range, Slim and Durable
-
MWX121 - Heat Resistant - offers a wide temperature range from -65 to +125°C.
-
MWX122 - High Durability - offers excellent cable durability against repeated bending.
|
Cable type |
Maximum Usable Frequencies |
Standard Insertion Loss (dB/m) |
Outer Cable Diameter (mm) |
Cable Weight (g/m) |
Continuous operating temperature (°C) |
Assembly length (mm) |
||
|---|---|---|---|---|---|---|---|---|
|
18.5GHz |
Maximum frequency |
Min |
Max |
|||||
|
MWX121 |
26.5 GHz |
1.2 |
1.3 |
6.6 |
80 |
-65~+125 |
200 |
5000 |
|
MWX122 |
1.5 |
1.9 |
6.5 |
79 |
-65~+85 |
300 |
3000 |
|
|
MWX161 |
67 GHz |
3.5 |
7.3 |
6.5 |
79 |
-65~+125 |
600 |
1500 |
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- MWX121, MWX161: Suitable for a wide continuous operation temperature range (-65°C to +125°C) in microwave measurement environments
- MWX122: Dramatically improved mechanical life
Use
- For microwave band measurements requiring a wide temperature range (device assessment, etc.)
- Testing equipment requiring durability
- Multiport vector network analyzers
Slim Phase Stable
Cable MWX161 Cable assemblies with a small diameter at the neck, making it the most suitable for a Multiport VNA.
Heat Cycle Test for MWX121
The cycle indicated above chart was repeated 30 times. We measured the insertion and return loss of the specimen that was taken out from the tester after the 30 cycles.
Composite Durability Test for MWX122
We measured the insertion loss and observed the shield after the composite durability test that applies 50,000 times of bending, rubbing, and twisting.
Document
More Product Information
- The LL158 Series produces an oblique (30°) line of illumination for line scan applications in a passively cooled design.
- When oriented across a moving web or conveyor line, unlike standard line lights, this linear light’s unique geometry highlights engraved or raised lines that run parallel to the material travel.
- Provides an intensity level of 53kLux (working distance of 75mm).
- Pre-engineered for expandability in 6” (152mm) increments up to 90” (2.28m).
- Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
- Three independent, isolated DC output power supply 600W channels
- Total DC power density up to 1800W in a 1U chassis
- 5 autoranging output channel options
- Intuitive color touch panel control
- Multi-language display for global operation
- Multi-channel programmable sequencing, ramps, and delays
- Active power factor correction (PFC)
- Standard LXI LAN, USB, and RS232 interfaces
- Optional GPIB interface
- Full remote control via Virtual Panels™
The SMX-5xxx product family includes the SMX-5001 and SMX-5002.
- High dispersion for reflective surfaces and shorter working distances.
- Provides a narrower and less intense illumination area than the AL116.
- IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
- Available with polarization and diffusion light conditioning.
- This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 40″.
7 series Assemblies offer phase stability in multi purpose applications delivering reliable electrical performance, especially in phase & amplitude stability against temperature, to support repeatable measurement results.
-
The BL2 Series provides a highly uniform and high intensity, diffuse backlight source, primarily used for creating object silhouettes of high contrast or imaging through semi-translucent materials.
-
BL2 Backlights are pre-engineered for scalability, allowing for size configurations in 1″ increments up to 46″ in length and width.
-
This Backlight series is offered in 5 wavelength options and can be configured with either a polarization or collimation film.
-
As with all Advanced illumination products, this series is built for tailorability while still maintaining a standard lead time of one to three weeks.
-
Each side of a BL2 is equiped with M6 nut channels, allowing for quick and easy mounting. This series comes with our LB111 Mounting Brackets.
- Precise programming of voltage and current slew rate for sensitive loads.
- Industrial field bus interfaces (Modbus-TCP, Modbus-RTU, Ethernet) enable real-time digital control.
- Built-in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
- Programmable analog interface scaling facilitates integrating the ASD FLX with existing systems easily.
- Built-in energy meter calculates the delivered energy throughout a process or period.
- Optional real-time clock enables accurate timestamping of events.
- 3000 VA to 15000 VA of AC Output Power
- Combines AC/DC source and power analyzer
- Harmonic analysis of Voltage and Current
- Programmable Impedance
- AC, DC and AC+DC Output Modes
- Multiple Chassis Configurations
- Powerful output transient generation
- High Crest Factor Capability
- Arbitrary waveform generation
- IEC 61000-3-2 and IEC 61000-3-3
Junkosha, Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177
Test & Measurement
Download Line Card
Document
