You design the future. We help you make it happen.
Dualos - Fittings - NEO 605C Series
NEO X05 5080 PSI Adapters
|
Part Number |
Port Size 1 |
Thread End [1] |
Port Size 2 |
Thread End [2] |
A |
B |
D |
|
NEO 605C-P-04 |
4, 12 |
JIC-37 Degree |
4 |
0.4375-28 UNJEF Class 3B |
2.01 |
0.40 |
1.88 |
|
NEO 605C-P-06 |
6, 12 |
JIC-37 Degree |
6 |
0.5625-24 UNJEF Class 3B |
2.11 |
0.49 |
1.88 |
| NEO 605C-P-08 |
8, 12 |
JIC-37 Degree |
8 |
0.7500-20 UNJEF Class 3B |
2.22 |
0.56 |
1.88 |
|
NEO 605C-P-10 |
10, 12 |
JIC-37 Degree |
10 |
0.8750-20 UNJEF Class 3B |
2.37 |
0.66 |
2.25 |
| NEO 605C-P-12 |
12 |
JIC-37 Degree |
12 |
1.0625-18 UNJEF Class 3B |
2.44 |
0.70 |
2.25 |
|
NEO 605C-P-16 |
12 |
JIC-37 Degree |
16 |
1.3125-16 UNJ Class 3B |
2.63 |
0.79 |
2.50 |
|
NEO 605C-P-20 |
12 |
JIC-37 Degree |
20 |
1.6250-16 UNJ Class 3B |
2.81 |
- |
2.70 |
*Approximate Dimensions [inches]
Document
More Product Information
With their domed shape, LUMIMAX® LED dome lights generate a diffused light that falls on the test object from all directions, achieving completely shadow-free illumination.
Typical applications are the inspection of reflective or mirroring materials. With a LED dome light, even complex or curved surfaces can be illuminated homogeneously.
LED dome lights are extremely well suited for standard-compliant reading and verification of two-dimensional codes.
The VTI Instruments 16-Channel bridge and strain gauge measurement instrument
- 24-bit, delta-sigma ADC, simultaneous sampling
- Programmable Sample Rate up to 128kSPS
- Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
- Voltage Excitation: 0.5V to 10V
- Current Excitation: 0.46mA
- 2-Wire & 4-Wire Ohms/RTD
- Bridge Zero Balancing
- Built-In-Self-Test (BIST)
- Strain Lead Wire Calibration
- Shunt Calibration: 50kΩ, 100kΩ & External provided by User
- TEDS Support
- LXI Ethernet Interface
- IEEE-1588 Synchronization
- Power over Ethernet (PoE) or 10–50 V DC input
- Built-in Parallel Data Streaming
- Full-featured Embedded Web Interface
- Compact 1U Half-rack Form Factor
- Measuring device for large extrusion tools up to 35 mm (1.37“) hole diameter
- Automated measurement process
- Focus indicator allows you to easily adjust the focus
- Homogeneous transmitted light illumination - made by iiM GmbH - for the ideal presentation of the area to measured
- The influence of the user is reduced to a minimum
- Robust, ergonomic design
- Ideal addition to the 2-camera system VCPEx+
-
NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
-
NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
- Two 120/240 V Outlets
- Circuitry rated for 20 A
- 8’ Flexible Power Cord
- Shrouded Safety Banana Jacks
- Stable footprint with non-slip feet
- Up to 96 differential channels per full rack mainframe
- Constantly monitor input signals for fault conditions
- Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
- Inputs can be masked, inverted, and combined to produce interrupts
- Can be used as a time stamp module and as a digital I/O
- Programmable debounce circuitry prevents erroneous readings
- 10 V and 100 V input ranges
- On-board memory stores events with IEEE 1588 timestamps
- Synchronize reading of input states with other scanned analog channels
Dualos
Website
787 SMOT compliant caps and plugs for hydraulic, fuel or DI water lines. 3000 PSI & 5000 PSI fine and extra fine threaded aircraft to JIC adaptors
