Brandywine - PTS-SAASM Precision Timing System - Combination M-Code & SAASM Version
- Network Time Server
- Dual Redundant Version Available
- Complete Remote Network Control using Standard Web Browser
- SAASM/M-Code GPS Receiver
- 10MHz, 1PPS IRIG B, Serial and Time Codes
- Timing Accuracy 40ns rms to UTC
- 1PPS, Have Quick Inputs
The PTS M-Code is a state of the art frequency instrument offering a wide range of features and time and frequency outputs accurate to < 40ns rms to UTC (USNO) and 1×10-12 respectively.
This new generation of network appliance is economical and reliable and offers complete remote control and monitoring via a web-browser based interface.
The PTS M-Code can be used in either a single or dual redundant configuration and in conjunction with one of Brandywine Communications range of Distribution Amplifiers, such as the FTSU-100.
Applications for the popular PTS M Code include central time and frequency systems, satellite earth stations, military communication systems, and high availability network time servers.
An extremely accurate internal rubidium oscillator is used as the internal time base that drives all the time and frequency outputs. This rubidium oscillator is disciplined using an advanced control algorithm, ensuring superior holdover performance. The time constants of this algorithm are user-adjustable to suit specific applications.
A low cost rack adapter is available (not shown).
The PTS-SAASM utilizes a 12 channel P(Y) code SAASM/M-Code GPS receiver. It may also be disciplined to an external 1PPS/HaveQuick time code source.
A 100baseT Ethernet port is provided which is used both for monitoring and control of the instrument and for Network Time Protocol. This interface supports both fixed and dynamic IP address assignment via DHCP.
In addition to configuring the PTS-M Code, the built-in web browser provides information on GPS, internal monitoring of time errors, and internal parameters of the atomic oscillator. The user may set thresholds of any monitored parameter to trigger an alarm.
A precision 1PPS time mark is available for synchronizing or calibrating other equipment and the IRIG B serial time code allows synchronization to be distributed to other computers, displays, and related equipment requiring precise time.
An ASCII serial port outputs any user-selected time of day message at a 1/sec rate for synchronizing other equipment. The same output port may also be configured to output 50 bit/sec BCD time code in accordance with ICD-GPS-060.
A high stability 10MHz sine wave output provides an ultra‑stable, low phase noise frequency reference derived from an SC cut crystal that is locked to the rubidium reference.
1PPS
|
Connector Type |
row1 |
|---|---|
|
Signal Type |
row1 |
|
On Time |
row1 |
Serial Interface
|
Port Function |
row1 |
|---|---|
|
Connector Type |
row1 |
|
Signal Type |
row1 |
|
Baud Rate |
row1 |
Sine Wave Outputs
|
Number of Outputs |
row1 |
|---|---|
|
Connector Type |
row1 |
|
Frequency |
row1 |
|
Levels |
row1 |
|
Phase Noise (SSB) |
|
|
10 Hz |
row1 |
|
100 Hz |
row1 |
|
1 kHz |
row1 |
Time Code 1 Output
|
Number of Outputs |
row1 |
|---|---|
|
Code Format (Link sel) |
row1 |
|
Levels |
row1 |
|
Connector Type |
row1 |
Time Code 2 Output
|
Number of Outputs |
row1 |
|---|---|
|
Code Format |
row1 |
|
Level (Link Selectable) |
row1 |
|
Connector Type |
row1 |
|
ASCII Format |
row1 |
Fault Alarm Status
|
Output Type |
row1 |
|---|---|
|
Output Polarity |
row1 |
|
Connector Type |
row1 |
Environmental
|
Temperature |
|
|---|---|
|
Instrument |
row1 |
|
Antenna |
row1 |
|
Humidity |
row1 |
Physical
|
Dimensions |
row1 |
|---|---|
|
With Rack Mount Adapter |
row1 |
|
Weight |
row1 |
Power
|
Power |
row1 |
|---|---|
|
Optional |
row1 |
Document
More Product Information
- IRIG A & B, NASA 36 and 1 PPS inputs standard
- HaveQuick sync option
- Propagation delay compensation
- Zero latency time reads
- Match Time output
- IRIG B time code output
- External Event time tags
- On-board GPS receiver option
- Three user programmable rates
- Conduction Cooled Version
- 3 isolated low phase noise 10MHz outputs
- Internal GPS Tracking Receiver
- External 1 PPS input
- Small footprint designed for easy integration
- Disciplined high stability OCXO
- Up to 96 differential channels per full rack mainframe
- Constantly monitor input signals for fault conditions
- Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
- Inputs can be masked, inverted, and combined to produce interrupts
- Can be used as a time stamp module and as a digital I/O
- Programmable debounce circuitry prevents erroneous readings
- 10 V and 100 V input ranges
- On-board memory stores events with IEEE 1588 timestamps
- Synchronize reading of input states with other scanned analog channels
- Highest resolution – 12 bits all the time
- More capability – integrates multiple instruments into one
- Comprehensive probe support – supports over 30 probes in 9 categories
- MAUI with OneTouch user interface for intuitive and efficient operation
- Network Enabled Distribution Amplifier
- Low Phase Noise Reference Frequency Outputs
- Fault Alarm Output
- 1U 19″ Rack Mount
- Frequency Synthesizer Option
- Hitless Switching of Reference
- Programmable Amplitude
- Propagation Delay Compensation
- 10 MHz Standard, Other Frequencies Available
- Digital Clock Automatically Synchronizes with NTP servers over Ethernet Network
- 0.5”, 3.2” or 5” display sizes
- Remote network management
- Time Zone and Daylight Savings support
- Multiple colors
- Optional Network Time Server version with built-in GPS receiver
- Optional built-in IRIG B time code reader
- SOSA Aligned
- 3U VPX Form-Factor
- Reduced SWaP applications
- Ruggedization Level 200
- 11 Radial Clock Outputs OpenVPX Backplane support for 1000BASE-KX or 10GBASE-KR
- Optional Chip Scale Atomic Clock (CSAC) Holdover
- Optional Low Phase Noise (LPN) Analog output
- Optional secure GPS (M-code)
- Optional Timecode I/O
- High-intensity LED digits
- Simple to customize for specific applications with our large range of options
- Excellent readability
- Suitable for interior applications
- Single-slot low profile 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- Designed for Low Profile PCI Express slots.
Brandywine Communications
Brandywine Communications Inc. offers superior products to the time and frequency marketplace. Our mission is to provide the finest equipment coupled with excellent before and after sale service. Our staff of dedicated professionals, based in Tustin, CA, represents over 100 years of collective experience in design, manufacturing and sales of precision time and frequency products. Many of our products are made here in the United States, which allows for quick turnarounds and custom design.
Products from Brandywine Communications range from components such as Oven Controlled Oscillators to complete timing systems like the top of the line High Performance Timing System (HPTS).
Several state-of-the-art time and frequency systems are available from Brandywine. The system product line includes single and dual-redundant models, GPS synchronization and a wide range of oscillator choices: TCXO, OCXO, high-stability OCXO and Rubidium types. GPS choices include both C/A code and SAASM models.
Brandywine also is the premier North American distributor of Oscilloquartz, a subsidiary of ADVA Optical Networking. Oscilloquartz is a premier synchronization supplier for telecommunications for wireline and wireless infrastructures throughout the world. This partnership creates a powerhouse of timing and telecommunications that expand Brandywine's services to their customers in the US and Canada.
We supply several major market segments including: Aerospace, US and Municipal governments, telecommunications, US military, power utilities, financial institutions, test ranges, automotive industry, healthcare and schools.
Brandywine Communications, Inc. is certified as a Small Business Organization with the United States Small Business Administration (SBA’s 8(a) Certification Program) and is registered on the System for Award Management (SAM.gov) website which makes us eligible for all awards or grants specified under this provision.
Contact Details
Brandywine Communications Inc. - Ultra-Precision Time & Frequency
2921 Daimler Street, Santa Ana, CA 92705, USA
Phone: +1-714-755-1050
Email: support@brandywinecomm.com
Embedded
Download Line Card
Document
