AVT - Guppy PRO F-033 Small CCD camera with Sony ICX414 - IEEE 1394b, VGA
-
Compact VGA camera
-
Robust metal housing
-
½’’ CCD sensor
-
Optocoupled I/Os
-
Various IR cut/pass filters
-
White medical housing
The Guppy PRO F-033B/F-033C is a small IEEE 1394b camera with the Sony ICX414 sensor and VGA resolution. At full resolution the camera runs 85 frames per second. With a smaller area of interest (AOI), higher frame rates are possible.
Specifications
Interface
IEEE 1394b - 800 Mb/s, 1 port
Resolution
656 (H) × 492 (V)
Sensor
Sony ICX414
Sensor type
CCD Progressive
Sensor size
Type 1/2
Pixel size
9.9 µm × 9.9 µm
Lens mount (default)
C-Mount
Max. frame rate at full resolution
85 fps
ADC
14 Bit
Output
Bit depth
8-12 Bit
Monochrome pixel formats
8/12/16
RGB color pixel formats
RGB8
Raw pixel formats
8/12/16
Operating conditions/dimensions
Operating temperature
+5 °C to +45 °C
Power requirements (DC)
8 V to 36 V
Power consumption
<3.5 W (@ 12 VDC)
Mass
80 g
Body dimensions (L × W × H in mm)
44.8 × 29 × 29 (including connectors)
Regulations
CE: 2014/30/EU (EMC), 2011/65/EU, including amendment 2015/863/EU (RoHS); FCC Class B
Features
- Look-up table (LUT)
- Gamma correction
- Color correction
- Area of interest (AOI), separate AOI for auto features
- Binning
- Sub-sampling
- Auto gain (manual gain control: 0 to 24.4 dB)
- Auto exposure (31 µs to 67 s)
- Trigger programmable, level, single, bulk, programmable delay
- Storable user sets
Scope of delivery
- Camera and IEEE 1394b cable (other configurations on request)
Applications
This inexpensive, reliable mainstream machine vision camera addresses a wide range of imaging applications. With its ultra-compact housing, the Guppy PRO F-033B/F-033C is the perfect fit for all applications with space constraints.
- Machine vision
- Robotics (robust housing, lightweight camera)
- Quality control
- Semiconductor inspection
- Industrial inspection
- ITS/Traffic monitoring
Quantum efficiency
Document
Document
Document
Technical papers, knowledge base
3D CAD files (STEP)
Please right-click the link of a 3D camera model and select save as to download the file. After downloading, unzip the STEP file. You need a 3D CAD viewer application to view and measure the STEP files. Download a STEP viewer free of charge: https://www.freecadweb.org/
Software and firmware
Vimba is our current future-proof SDK.
You can also download legacy software for 1394 cameras.
To obtain firmware for your 1394 camera, please contact our technical support team.
More Product Information
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power over Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT3400) and color (GT3400C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel column masking feature with the Load Defect Tables tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
The SMP6xxx product family is made up of the SMP6001, SMP6002, SMP6004, SMP6005, SMP6006, SMP6101, SMP6102, SMP6103, SMP6122, SMP6144, SMP6202, SMP6301 (pictured), SMP6301T, and SM6306.
- Complete solution - battery test, simulation & solar array simulator software included
- Highest power density up to 37 kW in 4U rack height (9.25 kW/U)
- Fastest and cleanest power available (fastest transient response and low output ripple and noise)
- Universal 3-Phase AC Input accepts 180 VAC to 528 VAC
- Longest manufacturer-based reliability guarantee: 5-year warranty
- Parallel system power up to 1.2 MW
- Output voltage up to 2,000 V
- Bidirectional output current up to ±150 A, up to ±4,800 A in parallel
- True extended wide-range autoranging output
- Regenerative to 95%
- Color touch panel user interface
- Seamless transition between source and sink
- Built-in islanding detection
-
High performance GigE Vision InGaAs SWIR camera
-
QVGA resolution
-
Power over Ethernet
-
no condensation
-
efficient cooling with fan
-
Nitrogen-filled cooling chamber to avoid condensation
-
Up to 344 fps at full resolution
-
GigE Vision interface with PoE
-
Comprehensive I/O control options
-
Automated on-board image correction
-
TEC1 sensor-cooling
-
Extended operating temperature range
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
-
Probe loss is 3 dB typical between 140 and 200 GHz, S11/S22 15 dB typical
-
Reduced unwanted couplings and transmission modes
-
Able to shrink pad geometries to 25 x 35 µm (best case)
-
Typical contact resistance < 0.05 Ω on Al, < 0.02 Ω on Au
-
WR15, WR12, WR10, WR8, WR6, WR4, WR3, and WR2 bands available.
-
Fast GigE Vision InGaAs SWIR camera
-
VGA resolution
-
TECless
-
Power over Ethernet
-
Compact industrial design, no fan
-
Up to 301 fps at full resolution
-
GigE Vision interface with Power over Ethernet
-
Comprehensive I/O control options
-
Automated image correction
-
IMX250 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-508m) and color (1800 C-508c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
- DigRF v4 Decodes
- Low-speed (26 Mb/s)
- Medium-speed (1248 Mb/s)
- High-speed (1456 Mb/s)
- DigRF v3 Decodes
- Low-speed (6.5 Mb/s)
- Medium-speed (26 Mb/s)
- High-speed (312 Mb/s)
- Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms
- Correlate analog waveforms with protocol decode on one screen
- View decoded data in hexadecimal format
- Decode information expands as the time base is adjusted or zoomed
- Convenient table display with quick “Zoom to byte” capability
- Quick search capability for specific message packets
Allied Vision Technologies
For more than 30 years, Allied Vision has been helping people to reach their imaging goals. Allied Vision supplies camera technology and image capture solutions for industrial inspection, medical and scientific imaging, traffic monitoring and many more application areas in digital imaging.
With a deep understanding of customers’ needs, Allied Vision finds individual solutions for every application, a practice which has made Allied Vision one of the leading camera manufacturers worldwide in the machine vision market.
The company has nine locations in Germany, Canada, the United States, Singapore and China and is represented by a network of sales partners in over 30 countries.
Contact Details
Allied Vision
102 Pickering Way - Suite 502 Exton, PA 19341, USA
Phone: +1-877-USA-1394
Fax: +1 978-225-2030
Imaging/Machine Vision
Download Line Card
Document
