AVT - Alvium 1800 C -2050 Embedded vision CSI-2 camera with IMX183 sensor
-
IMX183 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-2050m) and color (1800 C-2050c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
Alvium CSI-2 cameras enable new designs for embedded applications with improved image quality and reduced workload for the host. The innovative ALVIUM System on Chip (SoC) performs image corrections and preprocessing tasks onboard the camera instead of the host computer. Unlike FPGAs commonly used in machine vision cameras, the ALVIUM SoC is extremely power efficient. With Alvium, integrating hardware and software can be done effortlessly, which ultimately reduces development time. The Sony IMX183 CMOS sensor enables imaging at 19.7 megapixel and 25 frames per second. Color models ship with an IR cut filter, monochrome models ship without a filter or protection glass.
View product page to configure camera options.
Hardware options
- Housing: Bare board or open housing
- Various lens mount: C-Mount
For more information on hardware options, including product codes and technical data, such as technical drawings and mass, see the Alvium Cameras Hardware Options document.
Available accessories
- Tripod adapter
- Adapter boards connect to various embedded boards.
- FPC cables in 120 mm, 220 mm, and 420 mm length
- Various lenses
More Product Information
-
High SNR mode (up to 24 dB better signal-to-noise ratio)
-
Low-noise binning mode
-
Shading correction
-
Defect pixel correction
-
Area of interest (AOI), separate AOI for auto features
-
Binning
-
Decimation
-
Auto gain (manual gain control: 0 to 24.4 dB)
-
Auto exposure (31 µs to 67 s)
-
Auto white balance
-
Look-up table (LUT)
-
Hue, saturation
-
Color correction
-
Local color anti-aliasing
-
Reverse X/Y
-
Deferred image transport
-
Trigger programmable, level, single, bulk, programmable delay
-
Sequence mode (changes the camera settings on the fly)
-
SIS (secure image signature, time stamp for trigger, frame count etc.)
-
Storable user sets
-
Camera and IEEE 1394b cable (other configurations on request)
-
Low noise GigE Vision InGaAs SWIR camera
-
VGA resolution
-
Power over Ethernet (PoE+)
-
large pixel with high dynamic
-
Strong sensor cooling, no condensation
-
Very strong sensor cooling for low-noise imaging with long exposure times
-
GigE Vision interface with PoE+
-
Comprehensive I/O control options
-
Automated on-board image correction
-
Extended operating temperature range
-
Monochrome (G-040B) and color (G-040C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Fastest Camera Link InGaAs SWIR camera
-
VGA resolution
-
TECless
-
Compact industrial design, no fan
-
Simple camera configuration via GenCP
-
Compact industrial design
-
Up to 301 fps at full resolution
-
Simple camera configuration via GenCP
-
Comprehensive I/O control options
-
Automated on-board image correction
-
Sony IMX273 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-158B) and color (G-158C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Ultra-compact design
-
IEEE 1588 PTP
-
Power over Ethernet
-
Trigger over Ethernet
-
Monochrome (G-223B) and color (G-223C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
-
IMX304 CMOS sensor
-
ALVIUM image processing
-
MIPI CSI-2 interface
-
Various hardware options
-
Monochrome (1800 C-1236m) and color (1800 C-1236c) models
-
ALVIUM® Technology for on-board image processing
-
MIPI CSI-2 interface with up to 4 lanes
-
Platform concept that enables the operation of different Alvium camera models with a common software
-
Hirose HR FHH55 FPC connector with minimum space requirements for a compact design
-
Precise sensor-to-lens mount alignment
-
Standard M3 mounting holes for top and bottom mounting, standard M2 mounting holes for front mounting
-
Industrial performance for embedded vision applications
-
Easy-to-install driver and code examples
-
High spatial resolution
-
IEEE 1588 PTP
-
Power over Ethernet
-
Defect pixel masking
-
Monochrome (GT4400) and color (GT4400C) models
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Planarity adjusted (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
-
Easy camera mounting via standard M3 threads at all sides and 1/4-20 tripod mounting hole
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Allied Vision Technologies
Firewire, Gigabit Ethernet and Camera Link Cameras