autoVimation - LED Ring Light "MEGANOVA"
- Onboard flash controller
- Designed for the integration into Orca/Shark enclosures with 3" window
- Flashing with up to 570% nominal current possible
- Excellent heat dissipation
- Colors: red, white, IR
- Radiation angles: 14°, 23°, 36°, 76° ‐ Trigger in‐/output
- LED protection due to emergency shut down
- Temperature monitoring possible
- Easy programming due to intuitive application surface
- Available in red, white and IR
- Interchangable LED lenses from 14° to 36° and 76° (not changable)
- Optimized for the use in the Orca, Megalodon Reverse and Shark enclosure
- With enclosure extension/flange also usable in Stingray, Chameleon L and Mammoth housings
- Up to four times over-powering possible thanks to excelent heat dissipation
- Onboard flash controller
- Wide range trigger input (5-24V/DC)
- Easy parameter settings thanks to intuitive general user interface via USB
- Polarizing filter for ring light and lens optionally
- Diffusor disks option
|
Product |
Layout |
Drawing |
Step |
eDrawing1 |
||
|---|---|---|---|---|---|---|
|
Meganova Ring Light |
|
|
|
→ PDF Download | → STEP Download | → eDrawings Download |
- Software for 3D imaging with measuring option: Free Download eDrawings-Viewer
More Product Information
- SPA available from 70KHz to 20/40/70/110/125/145 and 220GHz. Also available for banded configuration to 1.1THz.
- Dual SPA mode available: suitable for Mixers/Amplifier/ Harmonics /Spurious testing.
- SPA available on all ports. User can define which port to use as SPA port.
- Several detection types available in classical mode: Peak, minimum, RMS, Mean.
- Various math functions can be applied on SPA mode like Min hold/max hold/ user defined equations.
- Sources and receivers can be independently configured. Can be used as Tracking Generator.
- For units that have a dual source, a dual drive option is available. Support for external source control also possible.
- Phase synchronization for units with Dual source available. This feature allows users to control and configure the phase between the two sources.
- Source and receiver attenuator available with VNA can be activated in SPA mode. Recommendation to use option 62 (with attenuator on receiver side) for measuring the spectrum content of high-power devices.
- Software option: easy to install and upgrade existing user equipment.
The ZS Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input resistance and low 0.9 pF input capacitance means this probe is ideal for all frequencies. The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes with bandwidths of 4 GHz and lower.
The VS1510 is a video & data recorder/server packaged in a rugged compact chassis (4.92” x 5.75” x 7.28 ” / 9.9 lb), for recording on a Removable Memory Module (RMM).
Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis.
In addition, typically for ISR applications, data can be replayed while recording on board. The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for collecting, processing, storing, utilizing, and sharing field and mission data.
These units are designed for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, conforming to established standards such as DO-160 and MIL-STD-810.
Designed with Intel‘s IPU E2000 ASIC, the Network Infrastructure Optimization Solution is a secure, configurable network infrastructure acceleration, monitoring, and management platform serve critical applications and services across data centers or at the network edge
- Software-defined, Hardware-accelerated - Accelerate critical applications and services with a single piece of hardware equipped with software that enhances functionality and programmability.
- Network Visibility and Data Analysis - Detect anomalies in network traffic with sub-10 nanosecond precision timestamping while encrypting data packets traveling between devices.
- Enable Streamlined Management - Run multiple workloads in parallel at 200Gbps line rate speeds without interference or resource contention within diverse data environments.
-
14.7 fps at full resolution
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-201B) and color (G-201C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
CMOSIS/ams CMOS sensor
-
Power over Ethernet option
-
Angled head and board level variants
-
Video-iris lens control
-
Monochrome (G-223B) and color (G-223C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
- Robust and compact design, easy to handle
- Fast, reliable and highly accurate measuring process
- Integrated hardware and software, touch monitor for intuitive operationReliable, high-precision clamping of the test specimen (including conical tools / conical wire guides)
- The highly precise alignment of camera and test object chuck both enable a highly accurate measurement
- No extraneous light influences thanks to measuring behind closed sliding door
-
Ease of use – Less experienced operators can perform DC measurements by simply pushing a button. This reduces the need of experienced users full time on each system.
-
Reduced Soak Time – The system will automatically re-align the probes to the pads if they drift from alignment. This reduces test time and increases throughput.
-
Unattended Use – Measurements can be left running over night or the weekend, testing all devices on the wafer, and at different temperatures without the need of an operator.
Exterior Bottle Mount Liquid Level Sensors offer a reliable and hygienic solution for monitoring fluid levels in sealed or transparent containers. These sensors attach externally, eliminating the need for direct contact with the fluid, ideal for applications where contamination, leakage, or internal access is a concern. With flexible integration options and compatibility across various container materials, they are well-suited for use in medical devices, laboratory equipment, food processing systems, and industrial fluid management. Their non-intrusive design ensures easy installation and maintenance while delivering consistent performance.
autoVimation
Website
autoVimation produces protective camera enclosures and an extensive range of accessories that allows to use machine vision systems in virtually any environment. The enclosures are as variable as the applications: from the extremely compact Colibri to large housings for line scan cameras – from easy to integrate dovetail enclosures to to high grade stainless steel Dolphin and Shark in hygienic design – there is a solution for every application. Thanks to autoVimation's patented heat-guide / quick-lock camera mount the outer enclosure works like a heat-sink to the camera.
