Water Cooling Unit

• Perfect for use in climate chambers
• Cooling or heating thanks to heat exchanger
• Closed water circuit with compact cooling modules
• Climatization of the camera by means of heat conduction through the housing wall
• Permanent temperature monitoring with emergency shutdown possible

Heating Plate/Sun Roof

• Ideal for outdoor use
• Target temperature adjustable, no overheating possible
• Climatization of the camera by means of heat conduction through the housing wall

• AWGN as high as +13 dBm
• Bandwidths up to 18 GHz
• Bandwidth, output power, and flatness can be modified for specific applications
• TTL controlled attenuation

The NC1000 Series amplified noise modules produce AWGN as high as +13 dBm, and have bandwidths up to 18 GHz. The high power modules are designed to test noise immunity for Cable TV equipment, secure communication channels, and military jamming systems. The lower power modules, <= 0 dBm, are random jitter sources for many applications including, PCIexpress, Infiniband, and 10 GigE. The Bandwidth, output power, and flatness can be modified for specific applications. A newly developed TTL controlled attenuation feature is also available.

• 600 mW optical output power
• Eye-safe according to laser class 2M
• 70° fan angle
• Connection via 5-pin plug (12-24VDC) or 110-230VAC power supply unit
• Manually focusable
• IP67 RATED
• Integrated TTL Modulation*

The ZQ1-MagicLine is the brightest eye-safe line laser in its class worldwide, setting new standards in industrial laser technology. With its unique combination of laser class 2M safety and 600 mW optical output, it ensures a bright and precise line even in the most challenging lighting conditions. Unlike conventional lasers, it remains clearly visible in bright environments, making it ideal for positioning tasks with widely varying light levels. Its green 520 nm wavelength is especially well perceived by the human eye, while the 70° fan angle creates long, uniform lines. Manual focusing further enhances flexibility, making the ZQ1-MagicLine the perfect solution whenever precision, visibility, and safety must align.

• Redundant design with multiple signal paths built in for high-availability. 
• 12 expansion slots in the 2U version and 5 expansion slots in the 1U variant.
• Industry-first GPS integrity checking 
• Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover 
• 2U version is operated by an intuitive touch-screen interface, a first for any master clock system. 
• All components are hot-swappable and are dual redundant. 
• The Output Signal modules are hot-swappable from the front and minimize the need to disconnect cables.

• Designed for Harsh Environment: High Shocks, High Vibration, EMI/EMC, -50/+105 Celsius, Waterproof, Lightning
• Ultra Compact and Generic: Generic Analog Module, 2x3" / 51x76 mm, from 1 to 16 modules per stack
• Best data Ever: 1000 ppm in extreme temperature range
• Easy to Configure: eZ software Suite
• Process & Command: Preprocess Data and Program Commands to External Systems
• Multi Format Output Stream: PCM Chapter 4, PCM Chapter 7, Low latency video, UDP output

The VectorStar ME7838 Series broadband VNA offers the widest available single frequency sweep from 70 kHz to 110, (ME7838AX to 125), (ME7838EX to 125), to 145 GHz, and to 220 GHz with mmWave bands to 1.1 THz. 

• The ME7838AX or ME7838EX version can easily be upgraded to 145 GHz and to 220 GHz
• All versions may be configured to include banded millimeter-wave modules up to 1.1 THz
• Industry-best calibration and measurement stability: 0.1 dB vs 0.6 dB over 24 hrs.
• All versions support the 3744x-Rx receiver for noise figure measurements, including the ability to characterize differential noise figure, to 125 GHz
• Compact, lightweight mmWave modules (0.6 lb vs 7+ lbs and 1/50 the volume) offer low cost installation on smaller probe stations.

• High-level noise modules mounted on a circuit board
• Modified BW, output power, and flatness specifications

The NC2000 Series amplified noise modules are an excellent choice for high-level noise modules mounted on a circuit board. The NC2000 Series modules are housed in 24, or14-pin dual-inline packages. The NC4000 series modules are housed in a 40-pin module that cover similar noise bands to the NC2000, but have higher crest factor, and 60 dB of TTL controlled attenuation. Modified BW, output power, and flatness specifications are available for these modules. Please consult Noisecom for availability, and appropriate package style.

• SOSA Aligned 
• 3U VPX Form-Factor 
• Reduced SWaP applications 
• Ruggedization Level 200 
• 11 Radial Clock Outputs 
• OpenVPX Backplane support for 1000BASE-KX or 10GBASE-KR 
• Optional Chip Scale Atomic Clock (CSAC) Holdover 
• Optional Low Phase Noise (LPN) Analog output 
• Optional secure GPS (M-code) 
• Optional Timecode I/O

• Guaranteed performance to 43.5 GHz with Extended K™ ports
• High output power allows measurement of high attenuation devices
• Wide dynamic range enables measurement of very low reflection artifacts
• Excellent corrected directivity minimizes measurement uncertainty
• SmartCal™ auto calibration unit reduces calibration and setup time
• Time domain with time gating option grants easier and faster fault identification
• Modern LAN interface for remote control is faster than GPIB
• A common GUI and SCPI interface within the ShockLine family
• Bias tee option simplifies test setups where the DUT needs DC biasing
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
• E-Band VNA
  • Extended frequency range covering E-band and major parts of V band
  • Fully assembled test system eliminates setup errors and increases reliability
  • Tethered modules connect directly to the DUT increasing measurement stability