Galvanically isolated voltage probes separate the device under test (DUT) from the oscilloscope and earth ground, enabling safer and more accurate measurements. This isolation effectively rejects common-mode signals, minimizes noise interference, and eliminates ground loops in high-voltage environments.

Keysight's isolated probes require the use of a probe tip to perform measurements. Deskew and verify the performance of your optically isolated probe using a probe tip with an MMCX-type connector.

The PS0015A Isolated Probe Deskew and Performance Verification Kit is designed for use with the associated MMCX connector-style tips (PS0017/8/9A). The PS0015A PV fixture is meant only for deskew and performance verification of the probe. It is not designed for any other testing purpose. This fixture is safely rated to the maximum of 30 Vrms / 42 Vpk / 60 VDC. Please do not use it with voltages higher than this rating. 

Galvanically isolated voltage probes separate the device under test (DUT) from the oscilloscope and earth ground, enabling safer and more accurate measurements. This isolation effectively rejects common-mode signals, minimizes noise interference, and eliminates ground loops in high-voltage environments.

Keysight's isolated probes require the use of a probe tip to perform measurements. Convenient connectivity solutions for isolated probes. 

• The Agilent 85057B verification kit has a 2.4 mm connector and covers a frequency range of 45 MHz to 50 GHz.
• The verification kit is used with an Agilent 85056A 2.4 mm calibration kit and network analyzer, including the Agilent 8510, 8719/20/22 and PNA Series
• Verification kits are used to verify that a network analyzer is operating within its specified performance.
• All verification kits include measurement data and uncertainties that are traceable to the U.S. National Institute of Standards and Technology (NIST). 

• DC to 3 GHz frequency range
• The Agilent 85039B 75 ohm type-F calibration kit is used to calibrate Agilent 8752C, Agilent 8753, and Agilent 8712E network analyzer systems for measurements of components with 75 ohm type-F connectors up to 3 GHz

• The Agilent X11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of Agilent network analyzers
• This calibration kit has a precision airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements
• This kit also contains a commercial calibration certificate, flush short circuit, a precision shim, and a fixed termination

• The Agilent K11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of Agilent network analyzers
• This calibration kit has a precision airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements
• This kit also contains a commercial calibration certificate, flush short circuit, a precision shim, and a fixed termination

• The Agilent P11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of Agilent network analyzers
• This calibration kit has a precision airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements
• This kit also contains a commercial calibration certificate, flush short circuit, a precision shim, and a fixed termination

• DC to 6 GHz frequency range
• The Agilent 85032E economy calibration kit contains a type-N male fixed termination and a one-piece type-N male open/short circuit
• These standards are used to calibrate Agilent network analyzers for measurement of devices with 50 ohm type-N connectors
• The kit is specified from dc to 6 GHz