• Ideal for applications requiring high ENR and immunity to large incident RF power
• Low VSWR
• Built-in isolator

The NC3400 Series coaxial AWGN noise sources are an excellent choice for applications requiring high ENR and immunity to large incident RF power, such as ATE, radiometer, and radar systems. The calibration accuracy and flatness of the NC3400 Series noise sources are enhanced by their low VSWR. The built-in isolator provides almost constant output impedance as the noise source bias is switched on and off. The isolator also protects the noise diode from incident RF power (consult the factory for higherpower units).

An SMA female connector is standard for the RF output and a BNC female connector is standard for the bias input. Other connectors are available as options.

The BARCUDA VP230 is the right system if you are looking for a complete turnkey solution for flexible testing and programming of your electronic assemblies. The stand-alone unit uses the technologies of embedded JTAG solutions such as VarioTAP or ChipVORX. However, you can also expand these to meet the functional test requirements of your electronics production.

With BARCUDA VP230 you can test and program assemblies with or without JTAG/Boundary Scan - with no need to configure a special in-house test system.

With a standard, robust interface "VPC G12 Receiver" from Virginia Panel Corporation (VPC), you can choose the adapter supplier (for needle bed adapters) for contacting your assembly and implement any mechanical requirements.

BARCUDA VP230 is equipped with a complete power-up unit and TAP control for 16 boards, which can be scaled up to 32 boards. It can also be expanded with analogue measurement cards, additional I/O channels and your specific hardware.

• Image acquisition from Camera Link Base camera 
• Supports Camera Link® operations up to 85MHz 
• Supports 32/64-bit Windows platforms 
• Quarter-length PCI Express x1 Board 
• Power Over Camera Link® (PoCL) Compliant 
• Offers external acquisition control signals on single PCIe x1 slotROHS compliant

• The RL3940 is characterized as a Folded Beam Dark Field ring light. 
• Precisely aimed LEDs, along with an aluminum beam folder, provide a specific and repeatable light pattern on the imaging plane. 
• The light provides up to 11kLux at a working distance of .6” (15mm). 
• The RL3940 is available in a wide range of wavelengths from UV to IR. 
• The folded-beam configuration provides dark field illumination in a compact 3.9” (100mm) housing. 
• The housing’s large inner diameter can accommodate lenses up to 55mm in diameter. 
• The light can also be ordered with an optional mounting ring.

• Precise: 0.5 µm resolution with absolute sensor
• High Push Force: 2N
• Low Power: 6 V DC, < 1 A
• Embedded: Closed-loop positioning
• Zero power Hold: With rigidity and no jitter

• Smart Stage: Embedded controller, no separate electronics 
  • Operate directly using I²C or SPI ASCII commands -or- 
  • Evaluate with Pathway™ PC Software and USB adapter 
• Cost-effective, long-life: For high-volume production 
• Small size: 32 x 32 x 10 mm 
• High resolution: 0.5 μm with absolute encoding 
• High speed: 35 mm/s 
• Long stroke: 8 mm 
• Power: 5 V DC input, ~ 3.2 W peak when moving 
• High repeatability: (± 2 μm typical)

• Low output capacitance 
• High bandwidth up to 30kHz 
• High resolution I-V curve simulates static and dynamic conditions 
• Designed for high speed Maximum Power Point Tracking (MPPT) 
• Can be integrated into a multi-channel system for higher power testing 
• Low voltage, high bandwidth version for DC Power Optimizers 
• EN50530 support

Comprehensive, Turn-key Integrated Measurement System (IMS) with Keysight SPA for On-wafer DC Parametric Measurements

• Dual Voltage ranges that support over-voltage testing on 480V-based systems 
• Separate terminal blocks for single-phase and three-phase AC power supply outputs 
• High Power AC and DC Source 
• Auto paralleling for higher power system expansion 
• Single and three-phase modes 
• Arbitrary & Harmonic Waveform Generation 
• Standard LXI LAN, USB, and RS-232, Optional GPIB 
• Step, list, and pulse voltage transients with down to 500usec resolution 
• Complete avionics power quality test suites 
• 15kVA to 1MVA Power Levels 
• Intuitive 5” color display for ease of navigation 
• Internationally accepted test routines for EMI/EMC, Safety Compliance