-
Our White High Intensity Linear Backlights offer 540 kLux output, perfect for back-lit, line-scanning applications.
-
Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
-
A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
-
Available in white only. For additional wavelengths please refer to our BL138 series.
Meatest - M133Ci 3F Power & Energy Calibrator
-
0.01° phase shift accuracy
-
15 - 1000 Hz output
-
Built-in multimeter for transducer calibration
-
Floating current outputs for 3-wire power meters
-
Voltage from Current function
Three phase electric power/energy calibrator for calibration and testing of power meters and power transducers.
M133C is electric AC/DC power and energy calibrator for calibration of power meters, power transducers and generally all kinds of power measuring devices. AC voltage, current, power and energy functions have calibrated phase shift in frequency range from 15 Hz to 1 kHz with resolution as good as 0.001 Hz. Simulated electric power can be set independently in each phase of both voltage and current signals. Built-in 5½ process multimeter for transducer calibration is standard part of every M133C calibrator.
Languages: English, Chinese (simplified)
Calibration versatility
M133C is more than just a sophisticated power source. Using built-in process multimeter, both transducer inputs and outputs can be handled by the M133C at the same time so you can calibrate it more easily, using no other calibration equipment. Floating current outputs can be connected directly with voltage outputs to allow for 3-wire power meter calibration. One calibrator, many applications - saving your time, space and costs.
| DC voltage |
3x 1 - 280 V ± 150 ppm / year |
| AC voltage |
3x 1 - 600 V, 15 - 1000 Hz ± 120 ppm / year |
| DC current |
3x 5 mA - 30 A (2250 A with 151-25 Current Coil) ± 175 ppm / year |
| AC current |
3x 5 mA - 30 A, 15 - 1000 Hz (2250 A with 151-25 Current Coil) ± 175 ppm / year |
| DC Power & Energy |
3x 5 mW - 8.4 kW (3x 420 kW with 140-50 Current Coils) ± 380 ppm / year |
| AC Power & Energy |
3x 5 mW - 18 kW, 15 - 1000 Hz (3x 900 kW with 140-50 Current Coils) 0.01° phase shift accuracy, power factor -1 to +1 ± 370 ppm / year |
Process Multimeter
| DC voltage |
0 - 12 V ± 100 ppm / year |
| DC current |
0 - 25 mA ± 100 ppm / year |
| Frequency |
1 Hz - 15 kHz ± 50 ppm / year |
More Product Information
-
Versatile temperature range for extreme environments
-
IEEE 1588 PTP
-
Power ovet Ethernet
-
P-Iris and DC-Iris lens control
-
Monochrome (GT1930) and color (GT1930C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
Real resistors switched by relays
-
14 decade range, resolution from 1 μΩ
-
Custom units and time sequences
-
No residual resistance
-
5 W load capacity
-
Six different languages
- High Voltage (500V) Input
- Digital control loop technology
- Two models: 375W & 750W
- Up to 750W/500V
- Parallel up to 8 automatically
- Modular
- High Power Density
- Simple integration
Specially modified design allows:
- Air to water heat exchanger added to system
- True current source
- Fast transient response
- Little to no current overshoot
- Low stored energy
- Leverage dual-camera single-laser design to deliver exceptionally high 3D reproduction fidelity
- Scan scenes quickly with profiling rates of up to 11,000 per second
- Gain from unique embedded algorithms to generate consistent profiles, depth maps, or point clouds
- Benefit from truly standard GigE Vision® interface to work directly with Zebra Imaging and third-party vision software
- Simplify cabling with Power-over-Ethernet (PoE) support
- Deploy confidently in tough industrial settings thanks to a solid IP67-rated2 aluminum housing and M12 connectors
- Benefit from several fastening points to facilitate fixing one or more sensors to gantries and robots
- Streamline sensor setup and verification via the Aurora Capture Works utility for Windows® and Linux®
- PowerFlex design provides higher currents at lower voltages enabling one model to meet many different voltage/current requirements.
- Compact design for bench use or rack mounting (1/2 or 1/4 rack width)
- True analog controls with digital settings locking (S-Lock)
- Mixed-mode regulation with linear final regulation for low noise
- Dual models have isolated voltage tracking and synchronous on/off.
- P models have RS-232, USB, and LXI-compliant LAN interfaces plus duplicate rear terminals. GPIB Optional.
- Our EuroBrite™ lineup outdoes the competition in so many ways. With more features at a competitive price point, there’s no better value in machine vision lighting:
- Complete built-in control for continuous and strobe modes.
- Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode.
- Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period.
- IP67 sealed enclosure suitable for washdown environments.
- Rugged construction that has been tested to withstand over 1000lb.
- Industrial grade LEDs providing high-intensity illumination of 33klux (working distance of 100mm).
-
Sony IMX304 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-1236B) and color (G-1236C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Meatest
We develop and manufacture electrical calibration instruments for calibration laboratories and testing facilities in electronics, engineering, utility, aeronautics and telecommunications sectors. Designed for automated calibrations our instruments bring effective solutions to customers like NPL, Samsung, Siemens and Volkswagen.
Contact Details
Meatest, spol. s r.o. Headquarters
Železná 509/3, Czech Republic - 619 00 BRNO
GPS: 49°10'13.93"N,16°36'53.2"E
Phone: 420-543-250-886
Fax: 420-543-250-890
Email: meatest@meatest.cz
Test & Measurement
Download Line Card
Document
