Note
16.4' or 5m Ethernet Cable for Matrox GatorEye, M12 to RJ45
You design the future. We help you make it happen.
Matrox - GT-CBL-ETH/5* 16.4' or 5m Ethernet Cable for Matrox GatorEye, M12 to RJ45
Mfg: Matrox
Model: GT-CBL-ETH/5*
Condition: Open Box
Description: 16.4' or 5m Ethernet Cable for Matrox GatorEye, M12 to RJ45
Price: $115.00
Item is in stock and ready to ship.
Quantity in Stock: 1
More Product Information
The EX2500A is a LXI-VXI gigabit ethernet slot-0 interface.
- Up to 10 kM distance from PC to mainframe through fiberoptic interface
- 40 MB/s block transfer rates
- Embedded Web Interface provides interactive utility to control instruments
- Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
- Backward compatibility with VXI 1.4 and 2.0 products
- External Clock In/Out with on-board options for TCXO/OCXO
- VXIplug&play compliant
- LMR Signal Analyzers with Coverage Mapping: P25, P25 Phase 2, DMR (MotoTRBOâ„¢), TETRA, NXDN, dPMR, PTC-ITCR, PTC-ACSES, NBFM, FDD & TDD LTE
- Broadband Signal Analyzers: LTE, WiMAX
- Interference Analyzer with Interference Mapping and support for MA2700A Handheld Interference Hunter
- Auto Test and Alignment of Motorola APX P25 mobiles and portables
- Direct measurement of up to 150 watt transmitters
- Spectrum Analyzer: 9 kHz – 1.6 GHz, optional to 6 GHz
- Cable and Antenna Analyzer: 500 kHz – 1.6 GHz, optional to 6 GHz
- Return Loss, VSWR, Insertion Loss, S11 / S21, DTF
- PIM Hunting
- Internal Power Meter, optional External Power Sensor
- Handheld, battery-operated design
- Weighs less than 7.6 lb (including battery)
- Rugged, field-proven design using Anritsu's 9th generation hardware platform
- Daylight viewable color touchscreen display
- Superior Immunity to RF interference
- Remote control via Ethernet
- Standard three-year warranty (battery one-year warranty)
Odin might be the god of war in Nordic mythology, but in the world of Ethernet testing, Z10 Odin is a key part of Xena’s Ethernet Traffic Generator solution.
Odin can test Ethernet devices at 6 speeds up to 10Gbps – 10/100/1000M and 2.5/5/10G.
The Xena Ethernet test platform includes Z100 Loki (NRZ testing 10G to 100G), Z400 Thor (NRZ testing 10 to 100G and PAM4 testing 50G to 400G), and Z800 Freya (10G NRZ to 800G PAM4) and Z1608 Edun for testing up to 1.6Tbps using 224G SerDes PAM4.
- Uses standard PC Ethernet port & hardware
- Supports cable lengths up to 100 m (CAT-5e or CAT-6)
- Simplified set-up with field proven Sapera LT software featuring CamExpert
- Engineered to accommodate industrial environment with a ruggedized screw mount RJ-45 connector
Xena OpenAutomation (XOA) is an open-source test automation framework for use with all Xena solutions.
Fast, easy to use and extremely flexible, XOA features a Python API that runs on any OS. You can use XOA in whichever way suits your test needs.
There are three main options:
- Use XOA CLI or XOA Python API to add Xena test equipment to your existing test automation setup.
- Use XOA CLI or XOA Python API to add Xena testers and run Xena test suites via your existing test automation setup.
- Use XOA to automate all your Ethernet testing.
Bank of fixed resistance, capacitance and inductance standards with defined frequency characteristic up to 1 MHz for automated calibration of LCR meters.
- Automated RCL calibration
- Calibration data from 20 Hz to 1 MHz
- No need for pen and paper method
- Capture from legacy to the latest video sources through support for SD analog to UHD digital formats
- Connect and switch between different video sources via Mini DisplayPort, HD-BNC, HDMI, and custom analog DVI1 connectivity
- Handle multiple video sources with the simultaneous capture of up to eight HD or two UHD streams2
- Optimize video transmission and storage through onboard multi-stream H.264 encoding
- Minimize system footprint by way of a single-slot PCIe card design
- Simplify application development using the Aurora Imaging Library, formerly Matrox Imaging Library (MIL), software development kit (SDK)
- Deploy on a current platform of choice with support for 64-bit Windows® 7/10 and Linux
The VTI Instruments 16-Channel bridge and strain gauge measurement instrument
- 24-bit, delta-sigma ADC, simultaneous sampling
- Programmable Sample Rate up to 128kSPS
- Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
- Voltage Excitation: 0.5V to 10V
- Current Excitation: 0.46mA
- 2-Wire & 4-Wire Ohms/RTD
- Bridge Zero Balancing
- Built-In-Self-Test (BIST)
- Strain Lead Wire Calibration
- Shunt Calibration: 50kΩ, 100kΩ & External provided by User
- TEDS Support
- LXI Ethernet Interface
- IEEE-1588 Synchronization
- Power over Ethernet (PoE) or 10–50 V DC input
- Built-in Parallel Data Streaming
- Full-featured Embedded Web Interface
- Compact 1U Half-rack Form Factor
Quick Ship Inventory
- In Stock Inventory is available for quick shipment
- In Box Items are still boxed up and brand new condition
- Out of Box Items are in used condition
- Get Equipment sooner when we have it for Quick Shipment
