Brandywine - CPCI-SyncClock32 CPCI timing plug-in with +5V and +3.3V signaling, available in 3U or 6U
- 3U or 6U CPCI form factor
- Optional Have Quick synchronization input
- IRIG’s A and B and NASA 36 time code inputs
- 1PPS sync input
- IRIG B output
- 1PPS and time code inputs are redundant
- Single-slot including GPS option
- Zero latency time reads, microseconds through years
- External Event input (optional eight and sixteen inputs)
- Match Time output
- Programmable Heartbeat rate
- Many additional options
The CPCI-SyncClock32 from Brandywine Communications provides precision time with zero latency to the host computer over the CPCI bus in the 3u form factor. An on-board microprocessor automatically synchronizes the clock to reference signal inputs. The reference signal inputs can be 1 PPS, IRIG or NASA time codes and optionally, GPS or Have Quick. The clock can free run and be set by commands from the host over the CPCI bus.
Variations
Model Number |
Description |
Form Factor |
Signaling Level |
Power Type |
ROHS Certified |
CPCI--UNIV-3U |
Synchronizable Clock For 3U CPCI |
3U |
+3.3V, +5V |
CPCI Bus |
No |
CPCI-UNIV-3U-ROHS |
Synchronizable Clock For 3U CPCI (RoHS) |
3U |
+3.3V, +5V |
CPCI Bus |
Yes |
CPCI-SYNCCLOCK32-UNIV |
Synchronizable Clock For 6U CPCI |
6U |
+3.3V, +5V |
CPCI Bus |
No |
CPCI-SYNCCLOCK32-UNIV-R |
Synchronizable Clock For 6U CPCI (RoHS) |
6U |
+3.3V, +5V |
CPCI Bus |
Yes |
More Product Information

- Accurate & reliable time data from a trusted source
- Remote configuration and status via web browser, remote monitoring with SNMP
- Synchronization between users – eradicates discrepancies
- System time stamping, such as e-commerce transactions, e-mail sent & received, is highly accurate
- Automatic systems procedures such as backups occur at the correct time and in the correct order
- Additional time signal outputs can feed to other systems
- Multiple time source fall back and priority configuration can ensure high synchronization availability
- Various oscillator choices allow for long holdover to maintain time accuracy when synchronization signals are absent

A precise measurement tool for a wide range of signals, such as NTP, IRIG B, 1PPS, ASCII against an internal precision GPS-controlled oscillator.
- Measures and displays the difference between input time signal and UTC
- Capable of measuring a wide variety of time signal inputs
- Timing resolution of better than 1 nanosecond
- Absolute accuracy of up to 50 nanoseconds to UTC
- Automatic identification and analysis of Modulated Carrier Timecodes
- Full color touch-screen with user-friendly Windows-based operating system
- USB port on front panel for easy access downloads for subsequent analysis of data
- Robust, portable design for all industrial applications
- Input available for measurement of relay opening/closing
- User-selectable threshold for alarm generation
- Robust, portable design for all industrial applications

- Single-slot low profile 32 bit PCI Express module
- IRIG A, B, NASA 36, 1 PPS sync inputs
- GPS sync option (maintains single-slot)
- HaveQuick sync input option
- Propagation delay correction
- Zero latency time reads
- Match Time output
- IRIG-B time code output (option)
- External Event time tags
- Three user programmable rates
- Supports Windows 8 & 10
- Digitally Signed WHQL Driver
- Designed for Low Profile PCI Express slots.

- Network Enabled Frequency Distribution Amplifier
- Dual Frequency Inputs with Auto Failover
- Low Phase Noise Reference Frequency Outputs
- Programmable per channel amplitude
- 1U 19” rack mount
- Redundant Hot Swappable Power Supplies

- Network Time Server
- Dual Redundant Version Available
- Complete Remote Network Control using Standard Web Browser
- SA-ASM GPS Receiver
- 10MHz, 1PPS IRIG B, Serial and Time Codes
- Timing Accuracy 40ns rms to UTC
- 1PPS, Have Quick Inputs

- IRIG A & B, NASA 36 and 1 PPS inputs
- HaveQuick sync option
- Propagation delay compensation
- Zero latency time reads
- Match time output
- External event time tags
- Three user programmable rates
- Conduction cooled

- SOSA Aligned
- 3U VPX Form-Factor
- Reduced SWaP applications
- Ruggedization Level 200
- 11 Radial Clock Outputs
- OpenVPX Backplane support for 1000BASE-KX or 10GBASE-KR
- Optional Chip Scale Atomic Clock (CSAC) Holdover
- Optional Low Phase Noise (LPN) Analog output
- Optional secure GPS (M-code)
- Optional Timecode I/O

- 6U, Single Width VME
- Time Code Inputs
- Time Code Output
- 1PPS Pulse Rate Output/Interrupt
- Frequency Outputs (1, 5, 10 MHz)
- External Event Capture/Interrupt
- Programmable Periodic Output/Interrupt
- Programmable Time Strobe Output/Interrupt

- Wide Input Bandwidth
- Input Isolation
- Automatic & Manual Changeover
- Transformer Coupled Outputs
- Twenty four Outputs
- Front Panel Status Indicators
- Fault Discrete Inputs
- Compact 1U, 19” rack mount

Brandywine Communications
Brandywine Communications Inc. offers superior products to the time and frequency marketplace. Our mission is to provide the finest equipment coupled with excellent before and after sale service. Our staff of dedicated professionals, based in Tustin, CA, represents over 100 years of collective experience in design, manufacturing and sales of precision time and frequency products. Many of our products are made here in the United States, which allows for quick turnarounds and custom design.
Products from Brandywine Communications range from components such as Oven Controlled Oscillators to complete timing systems like the top of the line High Performance Timing System (HPTS).
Several state-of-the-art time and frequency systems are available from Brandywine. The system product line includes single and dual-redundant models, GPS synchronization and a wide range of oscillator choices: TCXO, OCXO, high-stability OCXO and Rubidium types. GPS choices include both C/A code and SAASM models.
Brandywine also is the premier North American distributor of Oscilloquartz, a subsidiary of ADVA Optical Networking. Oscilloquartz is a premier synchronization supplier for telecommunications for wireline and wireless infrastructures throughout the world. This partnership creates a powerhouse of timing and telecommunications that expand Brandywine's services to their customers in the US and Canada.
We supply several major market segments including: Aerospace, US and Municipal governments, telecommunications, US military, power utilities, financial institutions, test ranges, automotive industry, healthcare and schools.
Brandywine Communications, Inc. is certified as a Small Business Organization with the United States Small Business Administration (SBA’s 8(a) Certification Program) and is registered on the System for Award Management (SAM.gov) website which makes us eligible for all awards or grants specified under this provision.
Contact Details
Brandywine Communications Inc. - Ultra-Precision Time & Frequency
2921 Daimler Street, Santa Ana, CA 92705, USA
Phone: +1-714-755-1050
Email: support@brandywinecomm.com
Embedded



