Advanced Illumination - I4 Inline Controller
- The fourth generation of Ai’s popular Inline Control System.
- High Output Power: Capable of delivering 2.1 amps of continuous output and up to 8 amps in overdrive strobe at 24V, outperforming all other inline controllers on the market.
- Compact & Rugged: Sleek enough to fit through wiring conduit with its compact anodized aluminum housing and sealed to IP68 standards for prolonged liquid immersion and complete dust protection.
- Plug-and-Play Functionality: Enabled with SignaTech™, allowing for simplicity when overdriving, without risk of damage to the lighthead. For more information, please refer to the Product Manual
The fourth generation of Ai’s popular Inline Control System.
High Output Power: Capable of delivering 2.1 amps of continuous output and up to 8 amps in overdrive strobe at 24V, outperforming all other inline controllers on the market.
Compact & Rugged: Sleek enough to fit through wiring conduit with its compact anodized aluminum housing and sealed to IP68 standards for prolonged liquid immersion and complete dust protection.
Plug-and-Play Functionality: Enabled with SignaTech™, allowing for simplicity when overdriving, without risk of damage to the lighthead.
For more information, please refer to the Product Manual below under downloads.
General Specs
|
Controller Style |
Inline Control System (Cable Inline, Permanently Affixed) |
|---|---|
|
Operating Modes |
Pulse (Overdrive Strobe), Gated Continuous, Continuous |
|
Input Connection |
Flying Tinned Leads or Optional A-coded 5-pin Male M12 Connector |
|
Input Supply Requirements |
24V DC Nominal, 2.1A Recommended 21V Min - 30V Max; Power Inputs Reverse-Polarity Protected |
|
Output Channels |
1 Inline Channel |
|
Output Power |
Continuous: 50W Max* Pulsed: 150W Peak Max* |
|
Output Current |
Continuous: 2.1A Max* Pulsed: 8A Max* (Load Dependent) |
|
Output Voltage |
Vin - 1V |
|
Trigger Signal |
NPN, Active Low, TTL Compatible PNP, Active High, TTL Compatible 2.5V Min - 30V Max, <=5mA |
|
Trigger Protection |
Protected up to 30V; |
|
Trigger Delay |
20 μs + 10us LED rise-time |
|
Trigger Frequency Limit |
2KHz *Requires Duty Cycle ≤ 1% beyond 1KHz |
|
Trigger Interaction |
Default OFF - PNP pull HIGH to enable, NPN pull LOW to enable |
|
Pulse Width Range |
30 μs - ∞ |
|
Duty Cycle Range |
<5% up to 5ms <10% up to 10ms ≥ 10% past 10ms |
|
Analog Dimming |
0V - 10V (0% - 100%); <=5mA |
|
Operating Temperature Range |
0°C to +60 °C |
|
Storage Temperature Range |
-25°C to +85 °C |
|
IP Rating |
IP68 |
|
Dimensions |
3.9" x 0.65 DIA (99.06mm x 20.6mm DIA) |
|
Weight |
Approx. 0.106lb (48g) |
|
Mounting |
N/A (Inline) |
|
Case Material |
Aluminum |
|
Warranty |
5 Years |
|
Compliance |
CE, RoHS |
*Values shown are based on controller component limitations. Actual limitations will vary depending on the limits set for the connected light head. These limits are hardcoded into each in-line controller to prevent LED failure from occurring when driven beyond the light's acceptable range.
Please refer to the User Manual for complete specifications.
Mechanical Specs
Control Specs
More Product Information
- This High Intensity Spot Light is engineered for long throw and high brightness illumination.
- Built with 12 high current LEDs focused to produce even illumination at distances beyond 300mm.
- Designed to replace our previous SL185 with 3X the brightness (110Klux @ 300mm).
- Available in a wide range of wavelengths.
- Boost performance by up to 3x over its precursor thanks to an Intel x6000 series embedded processor
- Capture high-resolution images at high speed through a choice of CMOS sensors from two to 16 Megapixels
- Deploy in dirty, humid, or harsh industrial environments by way of a compact IP67-rated design
- Communicate actions and results to other automation and enterprise equipment via real-time digital I/Os, and Ethernet (TCP/IP, CC-Link IE Field Basic, EtherNet/IP™2, Modbus® , PROFINET® , and native robot interfaces)
- Handle Human-Machine Interface (HMI) function by way of VGA and USB connectivity
- Simplify vision setup and upkeep via integrated lens focusing and illumination intensity control
- Synchronize to the manufacturing line through the support for incremental rotary encoders
- Solve machine vision applications efficiently with Aurora Design Assistant by constructing flowcharts instead of writing program code
- Maintain control and independence through the ability to code custom flowchart steps
- Tackle machine vision applications with utmost confidence using field-proven tools for analyzing, locating, classifying, measuring, reading, and verifying
- Leverage deep learning for visual inspection through image classification and segmentation tools
The Focus Compact Model (FCM) utility is a streamlined software package designed to be used with Focus’ AURIGA high-end Pulsed-IV system, that is used to generate Compact Models for transistors from their Pulsed-IV and wideband pulsed s-parameter data.
This is achieved by generating a network of lumped circuit elements that represent accurately the fundamental linear & non-linear behavior of the device over a broad range of bias and power range.
The result of the modeling is a netlist and compatible with- the most common CAD tools used in RF Design; such as AWR Microwave office (MWO) and Keysight PathWave Advanced Design System (ADS).
- For use with the SL256 Pattern Projecting Spot Lights
- Five field-replaceable standard patterns available
- 0.050mm line width photolithography
- Reticles include spanner wrench
- Please contact Ai for custom reticle patterns
- 8 Independent Channels, 2 Output Connectors
- Includes built-in pre-programmed sequencing.
- Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
- Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
- Housed within a compact enclosure with DIN rail mounting.
- Driven with SignaTech™ for improved safety and easy operation.
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
- The RL127 is characterized as a Large High Dispersion Bright Field ring light.
- Non-lensed LEDs disperse light at broad angles, providing “soft” lighting for applications that require short to medium working distances.
- The low-profile design is only .75” (19mm) thick, with an O.D. of 4.6” (117mm) and I.D. of 2.61” (66.3mm) allowing it to be used in space constrained applications.
- The I.D. provides a standard 67mm diameter thread with a pitch of .75mm for further mounting flexibility.
- A wide variety of wavelengths are available from UV to IR. An optional polarizer and/or diffuser may be used to further condition the light output.
- The RL121 delivers 20kLux at a working distance of 100mm.
- High Intensity: up to 9x brighter than the existing SL191 Pattern Projecting Spot Light and more than 3x brighter than the leading competitive structured light projector.
- Projection patterns are easily configured with available reticles, including line, grid, cross, multiple lines, and half sphere, with custom reticles available.
- Customizable: available in multiple wavelengths, including white.
- Constructed with a large heat sink for improved LED thermal management to facilitate increased brightness while maintaining safe operating temperatures.
- Ideal solution for machine vision inspection applications requiring structured illumination, including edge detection, locating offsets, and assessing topography.
- Requires a reticle and lens (sold separately); see available reticles here.
- The Linear Coaxial Light provides a type of diffuse illumination; diffuse light from an internal source is folded downwards along the camera’s imaging axis and onto the imaging plane.
- High speed machine vision line scan applications receive greater image contrast with a Linear Coaxial Light.
- The DL110 includes a high efficiency, coated, easy to clean dust cover to protect the beamsplitter.
- The SL112 is characterized as a Medium Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
- Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
- The spot light is designed with sufficient thermal management to provide 22kLux at a working distance of 4” (100mm).
- A range of visible wavelengths are available
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636
Imaging/Machine Vision
Download Line Card
Document
