Elgar - ReFlex Power 375–750W DC Load Module
- High Voltage (500V) Input
- Digital control loop technology
- Two models: 375W & 750W
- Up to 750W/500V
- Parallel up to 8 automatically
- Modular
- High Power Density
- Simple integration
ReFlex Power™ is a high density, modular programmable power system providing DC, AC and electronic load assets all under control of a single controller. It provides a reconfigurable, flexible platform ideal for ATE and production test environments where RFP™ can provide programmable stimulus and bias power as well as programmable loads for the device(s) under test. The EIA 4U high RFP™ mainframe can hold up to 12 single-slot modules or combinations of single, dual and triple slot wide modules to configure (or reconfigure) the system for the particular requirements at hand. The mainframe can support up to 6 kW of output power.
Up to 8 mainframes, potentially up to 95 modules, can be controlled via a single controller. The controller communicates to the individual modules via a high speed proprietary bus protocol, providing very high data rates and a high degree of deterministic control. The RFP™ controller communicates to the host controller via an Ethernet LAN connection designed to be compliant with the LAN Extension for Instrumentation ( ™ ) standard, assuring interoperability and ease of integration. RFP™ system modules can be combined via the controller, permitting the creation of “virtual assets” with the voltage/current combinations required for a particular test regime. Creating “virtual assets” reduces the “logistical tail” and total cost of ownership.
Available power modules include
- Single slot, 330 Watt programmable DC supplies
- 16V, 20.6A
- 65V, 5.1A
- Dual slot, 1kW programmable DC supplies
- 33V, 30A
- 50V, 20A
- 50V, 25A
- 120V, 8.3A
- 450V, 2.3
- Triple slot, 875 VA, single phase, programmable AC supply
- Dual range: 280V(rms), 3.5A(rms)
- Dual Range: 140V(rms), 7A(rms)
- Triple slot, 500V, programmable electronic DC loads
- 15A, 375 Watt
- 30A, 750 Watt
The mainframe provides internal power distribution, cabling, I/O and power connection and rack mounting for 12-asset slots. The mainframe also supplies the signal and control bus fabric supporting multi-module series/parallel operation, complex triggering, fault I/O and inter-mainframe control infrastructure.
|
DC Load Modules General Specifications |
|
|---|---|
|
Physical |
Size: 3 RFP Slots Weight 8.2 lbs (375W); 12.9 lbs (750W) |
|
Connectors |
DC Input and Sense: MS3102R20-24P Remote Programming: 9 pin D-Sub (Mating connector available) |
|
Stability |
<0.1% of FS after 8 hrs |
|
Temperature Stability |
<0.05% of FS/°C |
|
Protection |
Overvoltage: 525V ± 3% Overcurrent: 20A ± 3% (375W) 40A ± 3% (750W) Overpower: 19-394W ± 5% (375W) 38 – 788W ± 5% (750W) Reverse Voltage: -15V ± 1V |
|
Parallel Operation |
Up to eight modules. Must be adjacent. |
|
Noise |
30mA (pk-pk), 20 Hz to 20 MHz bandwidth |
|
Programming Response Time |
55ms |
|
Input Trigger Response Time |
≤5ms |
|
Dynamic Response (10 to 90/90 to 10%) |
50μs |
|
Remote Sense |
0.75V per source line |
|
Max Float Voltage |
500Vdc any input terminal to chassis |
|
Cooling |
Internal fans, require 110 CFM minimum airflow at altitude and ambient temperature |
|
Current Mode |
||
|---|---|---|
|
Model |
375W |
750W |
|
Range |
0-15A |
0-30A |
|
Resolution |
0.9mA |
1.8mA |
|
Accuracy |
0.3% of FS |
0.3% of FS |
|
Resistance Mode |
|
|---|---|
|
Range 1, Resolution |
1-99Ω, 1Ω at Current ≥ 1% of FS |
|
Range 2, Resolution |
100-1000Ω, 100Ω at Current ≥ 1% of FS |
|
Range 3, Resolution |
1000-5000Ω, 1000Ω at Current ≥ 1% of FS |
|
Accuracy |
5% of setpoint. Current ≥ 10% of FS |
|
Analog Control |
|
|---|---|
|
Range |
0 to 5V or 0 to 10V = FS |
|
Accuracy |
0.3% of FS + digital accuracy |
|
Bandwidth |
8kHz @ -3dB |
|
DC Input Ratings |
||
|---|---|---|
|
Model |
375W |
750W |
|
Voltage |
500V |
500V |
|
Current |
15A |
30A |
|
Power |
375W |
750W |
|
Min Voltage, Full Load |
Column 3 |
Column 3 |
|
Digital Amp Meter |
||
|---|---|---|
|
Model |
375W |
750W |
|
Range |
0-15A |
0-30A |
|
Resolution |
0.9mA |
1.8mA |
|
Accuracy |
0.3% of FS |
0.3% of FS |
|
Digital Volt Meter |
|
|---|---|
|
Range |
0-500V |
|
Resolution |
33mV |
|
Accuracy |
0.1% of FS |
All specifications are subject to change
More Product Information
-
Sony IMX541 CMOS sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-2040B) and color (G-2040C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
Bias tees with a perfect balance of RF performance and DC power handling
Auriga’s Bias Tees balance impressive RF performance with heavy-duty power handling across multiple frequency bands ranging from 100 MHz to 67 GHz. They are designed for rigorous usage without sacrificing RF performance. Only the highest-quality materials are used to minimize signal loss and enable efficient heat removal.
4U and 5U expansion chassis with ample power to run lots of PCIe slots and host multiple option cards. Provide total bidirectional throughtput between a host system and a target expansion system, delivering expanded I/O capabilities needed to support evolving workloads.
- Up to 18 Additional PCIe 3.0 Slots - Incorporate up to 18 additional PCIe 3.0 slots, allowing you to scale your system in response to your most complex application or program needs.
- System Design Flexibility - Connect host card to any system with a x16 slot. Easily add or remove I/O devices or make changes to existing components.
- Performance Optimization - Offload tasks from the host system and dedicate specific tasks to separate option cards, reducing congestion, latency, and resource contention.
-
Sony ICX415 CCD sensor
-
Power over Ethernet option
-
Angled-head and board level variants
-
Video-iris lens control
-
Monochrome (G-046B) and color (G-046C) models
-
GigE Vision interface with Power over Ethernet option
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
See Specifications & Details tab for additional information
-
High efficiency: up to 85.5 %
-
Low no load power consumption < 90 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1
-
Wide operating temperature range 0 - 45°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX12-F
- PowerFlex design provides higher currents at lower voltages enabling one model to meet many different voltage/current requirements.
- Compact design for bench use or rack mounting (1/2 or 1/4 rack width)
- True analog controls with digital settings locking (S-Lock)
- Mixed-mode regulation with linear final regulation for low noise
- Dual models have isolated voltage tracking and synchronous on/off.
- P models have RS-232, USB, and LXI-compliant LAN interfaces plus duplicate rear terminals. GPIB Optional.
The Drive Unit consists of a permanent magnet synchronous machine (PMSM) and our 48V MC6000 Motor Controller. The machine features a high torque/power density and can be operated in all four quadrants using the sophisticated control software. A permanent mechanical output power of 5 kW makes this drive system ideal for 48V applications in the e-mobility sector.
The system is controlled either via gas pedal and brake or via CAN bus.
-
Customizable configuration up to 25 contacts: RF, Eye-Pass power, ground, logic
-
Lithographically-defined tips allow automated over temperature measurement on pads as small as 30 µm x 50 µm
-
Low and repeatable contact resistance on aluminum pads (< 0.05 Ω) ensures accurate results
-
Durable probe structure ensures more than 250,000 contacts
-
Able to measure from -40°C to +125°C without compromising performance or accuracy of specifications
AMETEK Programmable Power
Located in San Diego, California, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
AMETEK Programmable Power boasts one of the industries' broadest portfolios of programmable power products under the well-known and respected Sorensen, Elgar, and California Instruments brands. AMETEK Programmable Power’s products serve a wide range of stimulus (T&M) and process power needs in applications including semiconductor fabrication, commercial and defense ATE, oil exploration, solar array and battery string simulation, avionics, general R&D and EMC compliance testing.
VTI Instruments provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time.
With strong brands, a broad product portfolio, exceptional precision power conversion and control expertise, proven power system integration capabilities and deep applications knowledge, AMETEK Programmable Power is your source for programmable power supplies, precision data acquisition instruments, and more.
Contact Details
AMETEK Programmable Power, Inc. − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries
Test & Measurement
Download Line Card
Document
