With their radial and flat incoming light, LUMIMAX® LED Dark Field Illuminations are the preferred option for inspecting surfaces. Their special light guide means that this LED Dark Field Illumination geometry can be used to show edges, cavities and other surface defects in high contrast.

The Dark Field Lights in the DFL series are available in several sizes for continuous and strobe mode.

Integrated controllers, powerful LEDs and standardised LUMIMAX® connections guarantee simple and stable integration of the LED Dark Field Illumination into the system environment.

• The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
• PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
• Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
• Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
• High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
• Single Step and Fast playback mode of test results.

• The SL112 is characterized as a Medium Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications. 
• Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles. 
• The spot light is designed with sufficient thermal management to provide 22kLux at a working distance of 4” (100mm). 
• A range of visible wavelengths are available

• The DF241 is characterized as a Small Low Angle Dark Field ring light. 
• Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern. 
• A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator. 
• With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view. 
• A 25mm field of view is standard with an optional field of view of 35mm. 
• Available in a range of wavelengths from UV to IR. 

*Engineered to provide comparable optical characteristics to our previous RL1360.

• The Small Dome Light is available in a wide range of wavelengths including a 3 channel, RGB configuration. 
• Rugged, cast aluminum housing has an outer diameter of 5.25” (133.3mm) and an inner, working diameter of 3.1” (78.7mm). 
• Provides up to 79kLux at a 1” (25mm) standoff.

• Guaranteed performance to 43.5 GHz with Extended K™ ports
• PC control takes advantage of external computer processing power and functionality
• Compact 1U high package for efficient use of bench and rack space
• No on-board data storage eliminates the need for data purging in secure applications
• Time domain with time gating option enables easier and faster fault identification
• A common GUI interface within the ShockLine family reduces switching costs between models
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction

Comprehensive, Turn-key Integrated Measurement System (IMS) with Keysight A-LFNA for On-wafer R&D Advanced Low-Frequency Noise Measurements

• Pre-Engineered Scalability Enables Customized Emitting Lengths in 2″ Increments to 20″
• Intense, Diffuse Lighting with 226 kLux at Emitting Surface
• Multiple Available Wavelengths, Including Visible Monochromatics, Infrared, and White
• Available Washdown Option for Difficult Environments
• Can be Applied in Backlighting or Diffuse Front Lighting Geometries

Edge-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.

Contained within a thinner housing than our Back-lit Flat Diffuse Lights (FD Series)

Product to be discontinued. Refer to change notice for details.