FRIWO - USB cables A to B - Connection cable from USB power supplies to Micro USB applications
-
USB type "A" to Micro USB type "B"
-
color: black
-
Cable length: 2000 mm
More Product Information
-
High Port Count
-
Rapid Switching Time at 30 ms
-
Low Insertion Loss (< 1.5 dB)
-
Low Wavelength Dependent Loss (< 0.3 dB)
-
O, C and L band operation
-
USB 2.0 Interface
-
CAN communication
-
Enable/Activation Input (e.g. from key lock)
-
State of Charge indication on display
-
Grid-ability: Connect up to 12 CAN-bus controlled batteries
-
Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
-
Large keys for gloved operation
-
Simple user interface
-
Lightweight and compact at 8 lbs.
-
Battery operation 6 hours plus between charges
-
Fully FAR part 43 appendix F compliant
-
Transponder Auto-Test
-
Data dump of transponder test results to PC
-
Elementary and Enhanced Surveillance parameters (DAP’s)
-
Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
-
Comprehensive GICB test
-
Configuration files for different classes of transponder
-
Comprehensively tests any DME channel including track sensitivity
-
User selectable TCAS scenarios
-
TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
-
Over-the-air or direct-connect operation
-
Parametric measurements including TX power and frequency
-
USB flash drive software update via web site download
-
Optional ADS-B capabilities are DO-260A/B compliant
-
Optional TCAS and 978 MHz UAT capability
-
Optional testing using UC-584 Coupler
Highlights
-
Interposers: x8 and x16 Slot, x4 Flying Lead pod, x4 M.2, x4 U.2 (available in dual port), and x16 SFF-8644
-
1U+ chassis with 128GB memory (64GB upstream and 64GB downstream)
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneously Analyze and Jam on a single chassis using one interposer
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
The Tap Upstream and Downstream ports allow AJA configuration Jamming
-
Cascade up to 4 Xgig captures into a single trace view
-
Full support of LTSSM for PCI Express
-
Memory segmentation for capture of multiple traces
-
Field replaceable modular fan and power supply assemblies
-
Portable, lightweight, and stand-alone
-
One-year hardware and three-year software warranties for the Xgig 4K16 PCI Express 4.0 Protocol Analyzer/Jammer
-
3 independent, isolated 600W channels
-
Total power density up to 1800W in a 1U chassis
-
4 autoranging output channel options
-
Intuitive color touch panel control
-
Multi-language display for global operation
-
Multi-channel programmable sequencing, ramps and delays
-
Active power factor correction (PFC)
-
Standard LXI LAN, USB, and RS232 interfaces
-
Optional GPIB interface
-
Full remote control via Virtual Panels™
-
Industry Leading Power Density
-
Up to 1500 Watts in 1U
-
-
Standard Digital Interfaces – USB&RS232/485
-
LXI Ethernet and Isolated analog interfaces
-
Power Factor Correction-PFC and universal AC input
-
“Green” Sleep Mode – Automatically “sleeps” after period of non-use
-
Built in sequencing - Unload your system controller
-
Programmable fold-back protection delay
-
Operates up to 32GT/s, PCIe 5.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2, Gen-3 and Gen-4 data rates of 2.5, 5.0, 8.0 and 16.0GT/s
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Integrates seamlessly with the Xgig software tools suite, including Expert™, for problem and performance analysis
-
PowerFlex design gives variable voltage and current combinations within a maximum power envelope
-
Up to 60V and up to 20A per output (420W maximum)
-
Constant voltage or constant current operation
-
Low output noise and good transient response
-
PowerFlex or fixed-range operation plus custom limits
-
True analogue controls with digital settings locking
-
Independent outputs or isolated voltage tracking
-
Outputs can be wired in series or parallel for 120V or 40A
-
Variable OVP trips; safety binding-post terminals
-
4 digit fixed resolution meters; selectable remote sensing
-
GPIB, RS-232, USB and LAN interfaces with LXI class C compliance
-
Compact ½ rack 3U case size; front and rear terminals
FRIWO
Based on 50 years of experience, FRIWO today has a global presence with modern development centres, production facilities and sales in Europe, Asia and North America. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices). At the end of the 2020 fiscal year, the company employed over 2,500 people worldwide and generated revenue of 99.4 million euros.
As an international system provider, FRIWO, headquartered in Ostbevern (DE), develops and produces digitally controllable power supply and drive solutions for futureoriented industries such as power tool technology, industrial applications, medical technology or electromobility.
The product portfolio includes technologically leading chargers, battery packs and power supply units as well as intelligent components for electric drive trains. The range of solutions extends from the display, motor control and drive unit to the control software.
Contact Details
FRIWO Gerätebau GmbH Headquarters
Von-Liebig-Straße 11, 48346 Ostbevern, Germany
Phone: +49-25-32-81-0
Fax: +49-25-32-81-112
Email: hello@friwo.com