VIAVI - Xgig M.2, 4-lane Interposer for PCI Express 5.0
-
Operates up to 32GT/s, PCIe 5.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2, Gen-3 and Gen-4 data rates of 2.5, 5.0, 8.0 and 16.0GT/s
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Integrates seamlessly with the Xgig software tools suite, including Expert™, for problem and performance analysis
This Interposer enables protocol analysis of communication between a M.2 PCIe SSD and the host system. It supports use in server, workstation, desktop and notebook PCs, and other system types. It is used for hardware, driver and applications debugging. Bidirectional PCIe 5.0 protocol data on each of 4 lanes is captured at up to 32GT/s rate for analysis.
Benefits
- Quicker NVMe SSD debugging and faster time-to-market
- Provides consistent, repeatable capture of link training, equalization negotiation and other data
Applications
- M.2 connections are commonly used for internally mounted computer expansion cards
- Supported by VIAVI Analyzer tools for trace capture with filter, trigger and more
- Supports error injection for deep system analysis
- Interfaces with Xgig Exerciser for endpoint emulation
- Works together with the VIAVI Xgig 5P8 and 5P16 PCIe 5.0 Analyzer/Exerciser/Jammer chassis
More Product Information
-
Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
-
Large keys for gloved operation
-
Simple user interface
-
Lightweight and compact at 8 lbs.
-
Battery operation 6 hours plus between charges
-
Fully FAR part 43 appendix F compliant
-
Transponder Auto-Test
-
Data dump of transponder test results to PC
-
Elementary and Enhanced Surveillance parameters (DAP’s)
-
Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
-
Comprehensive GICB test
-
Configuration files for different classes of transponder
-
Comprehensively tests any DME channel including track sensitivity
-
User selectable TCAS scenarios
-
TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
-
Over-the-air or direct-connect operation
-
Parametric measurements including TX power and frequency
-
USB flash drive software update via web site download
-
Optional ADS-B capabilities are DO-260A/B compliant
-
Optional TCAS and 978 MHz UAT capability
-
Optional testing using UC-584 Coupler
-
Generates and responds to PCIe complaint data packets
-
Operates to 32GTps, and supports all other PCIe data rates of 2.5, 5.0, 8.0 and 16GTps
-
Supports link widths of 1, 2, 4, 8 and 16-lanes
-
Set link rates and widths and control transitions other rates
-
Tightly aligned operation with the Analyzer for fully detailed bit-level trace captures
-
Execute the PCIe compliance test suite
-
Perform LTSSM testing: both positive and negative test scenarios
-
LTSSM state tracker with history log
-
Define custom test configurations, save and load
-
Define custom test suites and execution sequence
-
Swap DLLP ACK to NACK responses. Modify CRC
-
Define, send, and modify Ordered Sets
-
Template libraries available
-
Scripting API allows complex test cases
-
Graphical control interface provides easy visual presentation and setup of test procedures
-
Xgig tools and the Exerciser user interface operate on a Windows 10 enabled PC
-
Runs on the VIAVI 5P16 Analysis Platform chassis, Xgig5P-PCIe5-X16-PF
-
Works with the Xgig5P-PCIe5-X16-EH Exerciser Host-Mode Test Stand
-
VIAVI designed RF test system, fully integrated into the ATEC® Test System
-
Simple Ethernet interface between RFEM and ATEC® Test System permits easy retrofit to existing ATE installations
-
Powerful test executive interface offers many advantages to the test operator
-
Global service and support provided jointly by SPHEREA and VIAVI Solutions
-
Extensive CMM-listed TPS library in development or planned, covering Nav, Comm, TCAS, Transponder, GPS, and other RF systems
-
Complete RFEM and TPS information can be consulted on the SPHEREA Customer Support and Services MySpherea Internet web site
-
Our objective is to offer test coverage of RF products from all major OEMs
-
Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
-
Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
-
Reduces interference with air traffic control and nearby aircraft
-
Rugged design for ramp use
-
Fits most ‘Shark Fin’ L-Band antennas
-
Quick action antenna grip/release action
-
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
-
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
-
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
-
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
-
Generation of ARINC 596 Selective Calling Tones
-
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
-
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
-
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
-
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
-
Guided Test capability cuts down total test time
-
Low cost ELT option
-
Frequency counter provides external frequency measurement
-
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
-
Eight or more hours of operation before recharge
-
Automatic power shut-down
-
Ergonomic design
-
Provides precise storage I/O and TCP or UDP generation with full traffic flexibility and control
-
Accelerates Xgig® root-cause analysis through automatic triggering and advanced tracking of anomalies and errors
-
Enables auto-discovery of devices and automation of all remote testing and validation processes across complex network topologies
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2 and Gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Integrates seamlessly with Xgig Expert™ for problem and performance analysis
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 lanes, or dual-port operation of 2 links of 2 lanes each
-
Front-end module plugs into system-under-test
-
U.2 NVMe SSD DUT (not supplied) plugs into the Back-end module
-
Adjustable tray clamps and quick-release latch allow for snug fit and hot swap testing
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supplied with high-quality, custom SFF-8764 cables for Analyzer system attachment
-
Supports side-band signal triggering and capture
-
Supplied power brick makes Interposer power independent of host system
-
LEDs give quick indicators of power and status
-
Works with VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500