VIAVI - PSD90-1C AC/DC Fuel Capacitance Test Set
-
Easy to operate/calibrate
-
Annual calibration Lightweight / portable
-
Rechargeable battery or externally powered
-
Percent of battery capacity displayed
-
Self-test on power-up
-
Measures DC voltage Manual or Auto Ranging
-
2 and 3 Wire Meggar
-
Compliant with Boeing Spec 10-61959 Rev H
-
MIL-STD-810 Method 511.4 certified
-
Traceable to NIST
-
Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
The PSD90-1C Universal AC/DC Capacitance Test Set will test any AC or DC Capacitive Fuel, Water, LOX or Engine Oil Quantity System*. The PSD90-1C has features that allow the user to better troubleshoot and isolate fuel system problems. Rugged in design, the unit can be used anywhere testing and troubleshooting is required. Capable of being operated with external power, the PSD90-1C is ideal for shop or Depot Level repair of fuel system components.
NSN: 4920-01-510-5628 Designed for F-16 fleet
NSN: 4920-01-528-2230 Designed for universal non-F16 fleet
*Aircraft-specific interface cables are required and must be purchased separately.
Available through your GSA supplier
Versions
- *877 PSD90-1C/60-110 AC/DC Capacitance Test Set (110 V) PN: 01-1000-60 NSN: 4920-01-510-5628 Designed for F16 fleet
- 878 PSD90-1C/61-110 AC/DC Capacitance Test Set (110 V) PN: 01-1000-61 NSN: 4920-01-528-2230 Designed for universal non-F16 fleet
Aircraft specific interface cables are required and must be purchased separately.
Standard Accessories
- 57934 CBL PSD90-1C charger 110 V
- 57939 CBL PSD90-1C charger 230 V
- 75538 Operations Manual PSD90-1C
- 38647 Connector BNCF Rev. Polarity
- 38648 Connector BNCM Rev. Polarity
- 57929 GND Cable
- 57947 Interface 472844 F16 Simulator (Order Number: 877 only)
Optional Accessories
- 853 Precision Transfer Standard PTS-1 JPN: 01-0978-50 NSN: 6625-01-497-5942
Technical Specs
Size
- 10.6” x 14” x 6.5” (26.9 cm x 35.6 cm x 16.5 cm)
- 13 lbs
More Product Information
-
16GTps, PCIe 4.0 data rate operation. Fully compatible with lower PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Link widths up to 4-lanes
-
32GB memory (16GB Up Stream and 16GB Down Stream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
Full support of LTSSM for PCI Express
-
Multicolored LEDs on the front panel specify link speed, lane width and performance
-
Field replaceable modular fan and power supply assemblies
-
Works with Interposers for CEM slots, Flying-Lead probes, U.2 (SFF-8639), M.2, SFF-8674, OCulink, EDSFF and others
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Operates up to 16GTps, PCIe gen-4 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
SFF-8674 host and target connections support PCIe links of up to 4-lanes
-
Multiple Interposers can be used with links to 16-lanes.
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer plus two cables for DUT attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal capture and triggering in multiple formats
-
Two coax cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and status
-
Size: (L x W x H): 112 x 150 x 30 mm (incl. rubber stands)
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data traffic
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Provides precise storage I/O and TCP or UDP generation with full traffic flexibility and control
-
Accelerates Xgig® root-cause analysis through automatic triggering and advanced tracking of anomalies and errors
-
Enables auto-discovery of devices and automation of all remote testing and validation processes across complex network topologies
-
32GTps, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16 GTps
-
Link widths to 16-lanes, including 1-, 2-, 4-, 8-lanes
-
256GB memory (128GB upstream and 128GB downstream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneous capture of multiple links is allowed with multiple simultaneous users
-
Decodes all PCIe, NVMe and CXL traffic at all layers of the stack including the TLP, DLLP, and PHY layer packets
-
Flexible trigger events include training sequences, ordered sets, queue pairs, PRPs, SGL, SMB, etc.
-
Cascade captures from up to four Xgig chassis into a single trace view
-
Full support of PCI Express LTSSM analysis
-
Field replaceable power supply
-
LEDs give quick indicators of power and link status
-
Includes one-year hardware and three-year software warranties
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Supported by a wide variety of Interposers (CEM, U.3, etc.)
-
Modular
-
Assemble your own system. Plug-in RF modules and COTS-based CPUs, GPUs, FPGAs. Selection of JTNC SCA devices (Ethernet, GPS, audio, etc.)
-
-
Multi-Domain
-
Use across your entire organization. Develop for tactical radio, radar, electronic warfare, and signal intelligance domains
-
-
Integrated
-
Accelerate time to market with seamlessly integrated hardware an d osftware. Leverage pre-loaded NordiaSoft SCARI Software Suite
-
-
Multi-Purpose
-
Reduce cost. Support full life cycle development. Simulate design, emulate, and test on one integrated system
-
-
Scalable
-
Protect your investment. Benefit from a true component-based architecture for hardware and software
-
-
Universal
-
Future-proof your products. Leverage open, standards-based COTS software and hardware
-
-
32 GT/s, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Link widths up to 8-lanes
-
Memory segmentation for capture of multiple traces
-
Simultaneous two-link, dual port capture is allowed by multiple users
-
Host-Client connection for remote debugging using Ethernet, or local debugging using USB
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/ Gather Lists (SGL) etc.
-
Cascade up to four Xgig captures into a single trace view
-
Full support of LTSSM for analysis
-
Field replaceable modular fan and power supply assemblies
-
LED’s give quick indicators of power and status
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Configurable test capability
-
Intuitive user interface
-
Software defined applications
-
Remote operation
-
Android™ and iOS® compatible
-
Guided Test
-
Built-in GPS receiver
-
International test configurations Purchase only the test options that you need
-
Time saving ease of operation
-
Easily updated with future applications
-
Conveniently test in and around the aircraft from your mobile device
-
Recall saved test sequences for future use
-
Provides accurate positional data for ADS-B testing
-
Compliant with global regulatory requirements
-
Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
-
Large keys for gloved operation
-
Simple user interface
-
Lightweight and compact at 8 lbs.
-
Battery operation 6 hours plus between charges
-
Fully FAR part 43 appendix F compliant
-
Transponder Auto-Test
-
Data dump of transponder test results to PC
-
Elementary and Enhanced Surveillance parameters (DAP’s)
-
Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
-
Comprehensive GICB test
-
Configuration files for different classes of transponder
-
Comprehensively tests any DME channel including track sensitivity
-
User selectable TCAS scenarios
-
TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
-
Over-the-air or direct-connect operation
-
Parametric measurements including TX power and frequency
-
USB flash drive software update via web site download
-
Optional ADS-B capabilities are DO-260A/B compliant
-
Optional TCAS and 978 MHz UAT capability
-
Optional testing using UC-584 Coupler
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500