Luna - T-Ray® 5000 Series ASR5001 Spectroscopy Rail
-
Easy alignment without an optical table
-
Sample mounting fixture with integrated iris
-
No tool required to change lenses
-
Accommodate various focal length lenses
-
Use to measure transmission spectroscopy
-
Compatible with HTS40nm and HSR40n1
The T-Ray® 5000 is ideally suited for spectroscopic investigations. With its exceptionally long high speed delay, the T-Ray® 5000 can provide spectral resolution down to 1.5 GHz at 100 Hz. The measurement system is robust enough to be deployed in an industrial environment, but flexible enough to be used for a wide variety of experimental tasks.
The transmitter (HTS40nm) and receiver (HRS40n1) can be mounted on the ASR5001 Spectroscopy Rail to perform transmission spectroscopy measurements. A standard mount is provided to hold accessories or standard sample cards. The rail can accommodate lenses up to 150mm working distance. An iris is provided on the sample holder to block any portions of the beam that may not be going through the sample.
Tip-tilt stages provide easy optimization of the beam alignment to ensure maximum bandwidth. When used with an HTS40nm and an HRS40n1, the assembled collinear transceiver will provide over 3.5 THz of bandwidth and 70dB of S/N.
Rail Length | 60 cm |
---|---|
Size (W x H x D) | 60 x 15.5 x 7.5 cm |
Weight | 2.0 kg |
Applications
- Time domain spectroscopy
- Defect detection
- Basis weight measurement
- System optimization and verification
- Reaction kinetics monitoring
- Medical and biological research
More Product Information
-
Up to 12 mm measurement range using a 1 mm stainless steel cable
-
Rugged aluminum enclosure with IP67 rating; suitable for outdoor installations
-
Internal protection of connectors/splices
-
Double-ended design supports multiplexing of many sensors on one fiber
-
Fully temperature compensated over the entire operating range
-
Fast response time, stable measurements, high resolution
-
Dynamic and absolute measurement of FBGs, LPGs, FP and MZ sensors
-
Up to 16 parallel channels per system
-
Data verification key guarantees only valid output; each data set is calibrated and verified against a permanent NIST traceable reference
-
Proven reliability and longevity, with over 100 million hours logged since 2000
-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
Ruggedized sensor package, qualified to same rigorous standards applied to electronic gages
-
Integrated temperature compensation FBG sensor
-
User-adjustable zero point optimizes full use of strain range
-
Cable integrated with sensor package for fiber protection and strain relief
-
Double-ended design supports multiplexing of many sensors on one fiber
-
IP67 rated for protection from dust and water ingress
-
Compact enclosure
-
Mates to fiber coupled sensor head
-
Integrated data processor
-
Standard monitor and USB connections
-
Digital inputs available for measurement control
-
Complete Test Solutions
-
Complete test solutions for emissions and immunity compliance testing of AC and DC powered products
-
-
Single & Three Phase Operation
-
Offers flexibility
-
-
Direct PC Bus Access
-
Provides high sampling rate and resolution for accurate measurements and high speed data transfers
-
-
PC based harmonic & flicker testing
-
provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
-
Supports Global Standards
-
Supports European and Japanese standards
-
-
Easy To Use Interface
-
Provides IEC test setup, data analysis, display, MS Word test reports, and data files are generated in MS Excel format
-
-
High resolution
-
Data storage to disk in for post-acquisition analysis and reporting
-
-
Single Step
-
Single Step and Fast Forward replay of recorded test data at 200 mSec
-
-
Trigger over Ethernet
-
Piecewise Linear HDR feature
-
IEEE 1588 PTP
-
Ultra-compact design
-
Monochrome (G-030B) and color (G-030C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
See the Customization and OEM Solutions webpage for additional options.
-
Monochrome (G-507B) and color (G-507C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
Insertion Loss (IL)
-
Return Loss (RL)
-
Polarization Dependent Loss (PDL)
-
Phase Response
-
Group Delay (GD)
-
Chromatic Dispersion (CD)
-
Polarization Mode Dispersion (PMD) / Second Order PMD
-
Min/Max Loss due to Polarization
-
Impulse Response
-
Jones Matrix Elements
-
Phase Ripple – Linear and Quadratic
Luna Innovations
Luna Innovations mission is to help advance the continuing increase in data transmission rates for the public & private communications network with high speed optical receivers and test products, while also leveraging our unique fiber optic sensing technology to improve the structural testing of new composite elements and components in new aircraft and automobiles.
Luna Innovations Incorporated (NASDAQ: LUNA) was founded in 1990 and has been successful in taking innovative technologies from the applied research stage to product development and ultimately to the commercial market. In some cases, the successes led to the creation of independent businesses. We have created companies in our area of focus, sold some of them to industry leaders in their fields, raised private capital, formed joint ventures and entered into a number of licensing agreements.
Contact Details
Luna Innovations Inc.
301 1st Street, SW, Suite 200, Roanoke, VA 24011, USA
Phone: 540-769-8400