Luna - HD6T High-Definition Fiber Optic Temperature Sensors
-
Low-profile and flexible for complex geometries
-
High-density temperature measurements
-
Dielectric and EMI/EMC immune
-
Plug-and-play operation with ODiSI system
Unlike conventional discrete temperature sensors, Luna’s high definition fiber optic temperature sensors provide continuous, high-resolution (less than 1 mm) measurements of temperature along the sensor fiber.
HD temperature sensors are low-profile versatile fiber optic sensors which, when used with an ODiSI system, can provide more than a thousand distinct temperature measurements per meter. HD temperature sensors consist of polyimide coated fiber housed loosely in a PTFE tube (jacket) to reduce the amount of strain applied to the sensor.
Standard sensor lengths | Available from 1 m to 5 m |
---|---|
Sensor diameter | 0.8 mm |
Operating temperature range | -40 to 200 °C |
Fiber type | Polyimide coated sensing fiber housed in PTFE tubing |
Connector | LC/APC |
For full specifications, please download the data sheet.
More Product Information
-
2 kV CAT safety rated
-
Only 1500 Vdc safety rated probe per IEC/EN 61010-031:2015
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
DigRF v4 Decodes
-
Low-speed (26 Mb/s)
-
Medium-speed (1248 Mb/s)
-
High-speed (1456 Mb/s)
-
-
DigRF v3 Decodes
-
Low-speed (6.5 Mb/s)
-
Medium-speed (26 Mb/s)
-
High-speed (312 Mb/s)
-
-
Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms
-
Correlate analog waveforms with protocol decode on one screen
-
View decoded data in hexadecimal format
-
Decode information expands as the time base is adjusted or zoomed
-
Convenient table display with quick “Zoom to byte” capability
-
Quick search capability for specific message packets
-
High performance Camera Link InGaAs SWIR camera
-
QVGA resolution
-
Efficient cooling with fan, no condensation
-
Simple camera configuration via GenCP
-
Nitrogen-filled cooling chamber to avoid condensation
-
Up to 344 fps at full resolution
-
Camera Link interface with GenCP support
-
Comprehensive I/O control options
-
Automated on-board image correction
-
TEC1 sensor cooling
-
Extended operating temperature range
-
Operates up to 16GTps, PCIe gen-4 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
SFF-8674 host and target connections support PCIe links of up to 4-lanes
-
Multiple Interposers can be used with links to 16-lanes.
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer plus two cables for DUT attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal capture and triggering in multiple formats
-
Two coax cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and status
-
Size: (L x W x H): 112 x 150 x 30 mm (incl. rubber stands)
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data traffic
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
- Reduce your time spent debugging boards due to high precision fault isolation
- Improve your time to market and reduce project risk by early design verification
- Reduce your test development time by reusing tests from prototype/design in manufacturing and field support
- Ongoing time savings by test reuse across projects
-
Low-profile and flexible for complex geometries and embedded applications
-
NIST-traceable calibration
-
High-density strain measurements
-
Dielectric and EMI/EMC immune
-
Plug-and-play operation with ODiSI system
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
Luna Innovations
Luna Innovations mission is to help advance the continuing increase in data transmission rates for the public & private communications network with high speed optical receivers and test products, while also leveraging our unique fiber optic sensing technology to improve the structural testing of new composite elements and components in new aircraft and automobiles.
Luna Innovations Incorporated (NASDAQ: LUNA) was founded in 1990 and has been successful in taking innovative technologies from the applied research stage to product development and ultimately to the commercial market. In some cases, the successes led to the creation of independent businesses. We have created companies in our area of focus, sold some of them to industry leaders in their fields, raised private capital, formed joint ventures and entered into a number of licensing agreements.
Contact Details
Luna Innovations Inc.
301 1st Street, SW, Suite 200, Roanoke, VA 24011, USA
Phone: 540-769-8400