IntelliPower - FA00394 Power Distribution Unit
-
230Vac Input, L6-30P1 on 43.5 Power Cord, L6-15R10 Output, Each Output having a Circuit/Switch control, 1U9.5, Aluminum
TYPE | SPECIFICATION |
---|---|
Power Rating | 150W |
Chassis Configuration | 1U, ≤23"D |
Input Voltage | 120 VAC |
Input Frequency | 50/60 |
Input Connector | Pigtail |
Output Voltage | 110 VAC |
Output Frequency | 50/60 |
Output Connector | NEMA Type |
More Product Information
-
High efficiency: up to 94%
-
Low no load power consumption <210mW
-
Low leakage current ≤100μA
-
IEC 60601-1-2, 4th edition ready
-
Wide operating temperature range 0 - 70°C
-
Wide input voltage range 85 - 264 VAC
-
Isolation 2x MOPP
-
Operating altitude 5000m
-
Convection cooled 120 W / Forced cooled 175 W
-
EN 55011/32 Class B conform
-
1100 VA, 750 Watts, 230 VAC, 50 Hz Input and 230 VAC, 50 Hz Output, Double Conversion, On-Line, Isolated Rugged UPS with Power Factor Correction for Industrial Applications
-
Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
-
Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
-
ICAO Annex 10 amendment 77
-
ADS-B TX/RX
-
TIS
-
IFF Modes 1 & 2 and TACAN
-
Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
-
TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
-
Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
-
Detachable directional antenna
-
Large 5.7-inch LCD display
-
Simple user interface
-
Lightweight at less than 8 lbs.
-
Type APS-H CMOS sensor
-
IEEE 1588 PTP
-
Power over Ethernet
-
4.59 fps at full resolution
-
Extended near-infrared (GT5120NIR) model
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Planarity adjusted (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
-
Easy camera mounting via standard M3 threads at all sides and 1/4-20 tripod mounting hole
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Enhanced Defect Pixel Correction feature with a new Defective Pixel List Manager tool that allows you to load different user defined defective pixel lists to match your application and optimize the life cycle of the camera
- Octave Frequencies: 1-2 GHz and 2-4 GHz
- Narrowband Frequencies: 1.2-1.4 GHz & 2.7-3.1 GHz
- Power Levels: 1 kW to 150 kW
- Harmonic Distortion of -18dBc @ 1dB compression point
- Pulse Widths to 100 μsec. & Duty Cycles to 10%
- High Mean Time To Failure (MTTF)
- Mismatch Tolerance – Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
- Numerous Applications Possible – Automotive, MIL STD 464, DO-160 and Military
-
230Vac Input, IEC 60320-C13 suitable for 115/230Vac, IEC 60320-C14 x 8 Suitable for 115/230Vac, Each Output having a Circuit/Switch control, 1U9.5, Aluminum
-
High spatial resolution
-
IEEE 1588 PTP
-
Power over Ethernet
-
Defect pixel masking
-
Monochrome (GT6400) and color (GT6400C) models
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system costs
-
Comprehensive I/O functionality for simplified system integration
-
Planarity adjusted (PA) EF Lens Mount (option -18) for electronic control of aperture and autofocus
-
Easy camera mounting via standard M3 threads at all sides and 1/4-20 tripod mounting hole
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
3000 VA, 2500 W, 120/208 VAC, 50/60 Hz Input and 120 VAC, 60 Hz Output, Double Conversion, Online, Isolated, Rugged UPS with Power Factor Correction for Industrial Applications
-
3000 VA, 3000 Watts, input AC 120 or 240 VAC (-10%+15%), input frequency 40 to 70 Hz, Input and Output AC, 120 or 240 VAC (-10% + 15%); 120 VAC (+/-3%) output frequency 60 Hz, (+/-3 Hz), Double Conversion, On-Line, Isolated, Rugged UPS with Power Factor Correction for military Applications
IntelliPower, Inc.
IntelliPower, Inc., located in Orange, California, has been designing, manufacturing and supporting high-performance, cost effective Uninterruptible Power Systems (UPS) and frequency/voltage conversion solutions to protect mission-critical applications since 1988. IntelliPower’s on-line, double conversion UPS, power conditioner and frequency/voltage converter solutions utilize digitally controlled, high-efficiency power switching technology that has been proven for over 32 years on numerous platforms.
Customers with demanding environments use IntelliPower’s rugged products because of our proven record of providing outstanding solutions. IntelliPower’s in-house development proprietary circuit design, DSP firmware/software technology and wide range of enclosure designs, give IntelliPower unmatched capabilities to deliver systems configured to customer requirements backed by expert support.
Our ability to design and configure quickly is based on our standard proprietary subassemblies that go into variations of our power systems as required. Our product configurator tools and application engineers allow you to easily define your requirements and obtain your proposal for solutions that exactly meet your needs.
Contact Details
IntelliPower, Incorporated
1746 North Saint Thomas Circle, Orange, California 92865, USA
Phone: 714-921-1580
Fax: 714-921-4023
Email: ca-ora-sales@ametek.com
Contact form