-
The DF241 is characterized as a Small Low Angle Dark Field ring light.
-
Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
-
A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator.
-
With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view.
-
A 25mm field of view is standard with an optional field of view of 35mm.
-
Available in a range of wavelengths from UV to IR.
-
*Engineered to provide comparable optical characteristics to our previous RL1360.
Advanced Illumination - DF241 Small Low Angle Dark Field
General Specs
GROUP 1 (LOW-RISK) APPLICABLE WAVELENGTHS: 470, 520, 625, 660, WHI
GROUP 2 (MODERATE-RISK) APPLICABLE WAVELENGTHS: 395
Mechanical Specs
Optical Specs
Electrical Specs
Control Specs
Part No Key
CAD Files
More Product Information
-
The RL4260 is characterized as a Medium Aimed Bright Field ring light.
-
Precisely aimed LEDs provide a level of lighting control not found in traditional illuminators.
-
A range of standoffs and fields of view may be specified at the time of order.
-
The ring light is available in a wide range of wavelengths from UV to IR, including a 3 channel RGB version.
-
Diffuser and polarizer options are also available.
-
The large inner diameter of the ring light can accommodate lenses up to 55mm in diameter.
-
The light can also be ordered with an optional mounting ring.
-
To simplify the mounting process, Ai offers a line of camera brackets for positioning lights under or around the camera lens.
-
Most brackets are designed to be held in place by the same screw that secures the camera.
-
This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements.
-
Provides an intensity level of 2,100 klx (working distance of 75 mm).
-
Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”).
-
Available in multiple wavelengths.
-
In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C.
-
Note: Requires third party power supplies – refer to spec sheet.
-
Write your own code in ANSI C, as part of the FRIWO firmware.
-
Focus on developing your own applications and USPs:
-
Develop your own hill assist (application: eScooter)
-
Turn your motor control into a fan or pump control
-
Adapt CAN messages to your existing eScooter setup
-
Adapt CAN messages of your FRIWO Battery Pack
-
Use your own algorithms for field oriented control (coming soon)
-
Develop your own State of Charge (SOC) calculation within the BMS (coming soon)
-
-
Access to new modules to provide even more integration depth and possibilities for customization.
-
Monitor and change your own parameters within the FRIWO Enable Tool.
-
Advanced component protection against misconfiguration.
-
Easy rollout of your customized software for your eScooter fleet (Requirement: The eScooters run with MCU6000).
-
Access to Github Repository with detailed code samples.
-
The LL167 Series provides a focused line of illumination in a passively cooled design.
-
Only available in White (for color illumination in a similar package refer to our LL137 Series).
-
Provides a high intensity level of 472kLux (working distance of 75mm).
-
Pre-engineered for expandability in 6” (152mm) increments up to 96” (2.44m).
-
Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input
-
The DF242 is characterized as a Large Low Angle Dark Field ring light.
-
Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
-
A scratch on a sheet of glass is a good example of a defect that can be detected easily with a low-angle dark field illuminator.
-
With a light intensity of 24kLux at a working distance of 1” (25mm), the DF242 is perfect for imaging problems with medium sized fields of view.
-
A 35mm field of view is standard with optional fields of view of 45 and 70mm.
-
Available in a range of wavelengths from UV to IR.
-
*Engineered to provide comparable optical characteristics to our previous RL1660.
-
This DCS Series Controller provides Lighting Control Flexibility in a slim 112 mm x 124 mm x 23 mm package.
-
Plug-n-Play compatibility with Ai lighting Products, featuring SignaTech™ technology.
-
Seamless switching from continuous-on to gated on/off and strobe overdrive; 3 independently configurable trigger inputs.
-
Din-rail mount, UL 508a Panel listed and GUI, Web Browser or command line setup and control tools, SDK.
-
1 output, 3 channels – designed to drive multi-channel RGB / segment lights, as well as single higher current draw lights.
-
Best solution for high accuracy IV/CV, low-noise and 1/f measurements with PureLine, AutoGuard and next generation MicroChamber technologies
-
Enables up to 5x faster time to accurate data
-
Advanced 4-axis semi-automatic stage for accurate positioning and repeatable probe-to-pad contact
-
RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Wide range of extremly performant, reliable thermal chuck systems from ATT
-
Easy on-screen navigation, wafer mapping, and operation of accessories and thermal systems with Velox
-
User-centered design minimizes training costs and enhances efficiency
-
4 Independent Channels, 1 Output Connector
-
Includes built-in pre-programmed sequencing.
-
Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
-
Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
-
Housed within a compact enclosure with DIN rail mounting.
-
Driven with SignaTech™ for improved safety and easy operation.
-
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636