-
The SL223 is characterized as a MicroBrite™ Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
-
Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
-
The SL223 is also designed for general lighting purposes where a very intense, miniaturized light source is required. General purpose spot lights may be used to create both dark field and bright field affects, depending on how they are deployed during the inspection.
-
The spot light is designed to provide 8.1kLux at a working distance of 4” (100mm) and is available in a very wide range of wavelengths from UV to IR.
-
The SL223 is rated for IP65 washdown capability.
VTI Instruments - RX Series IEPE/voltage Instruments, Bridge Measurement, Charge Vibration Measurement and Thermocouple Measurement Systems
The RX product family includes 24-channel IEPE/voltage instruments (RX0424), 24-channel high performance bridge measurements (RX0124), 24-channel high performance charge vibration measurements (RX0224), and 32-channel thermocouple measurement systems (RX1032).
VTI Instruments’s family of rugged instrumentation is designed and built to operate in some of the most extreme environmental conditions imaginable, without compromising measurement accuracy or performance
RX0424 | 24-Channel IEPE Accelerometer / Voltage Inputs |
RX0124 | 24-Channel Bridge/Strain gage measurements |
RX0224 | 24-Channel Charge vibration measurements |
RX1032 | 32-Channel Thermocouple Measurement System |
More Product Information
-
24-bit, delta-sigma ADC, simultaneous sampling
-
Programmable Sample Rate up to 128kSPS
-
Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
-
Voltage Excitation: 0.5V to 10V
-
Current Excitation: 0.46mA
-
2-Wire & 4-Wire Ohms/RTD
-
Bridge Zero Balancing
-
Built-In-Self-Test (BIST)
-
Strain Lead Wire Calibration
-
Shunt Calibration: 50kΩ, 100kΩ & External provided by User
-
TEDS Support
-
LXI Ethernet Interface
-
IEEE-1588 Synchronization
-
Power over Ethernet (PoE) or 10–50 V DC input
-
Built-in Parallel Data Streaming
-
Full-featured Embedded Web Interface
-
Compact 1U Half-rack Form Factor
The Model PS2000B is a non-conductive, adjustable stand for mounting field probes. Each probe stand comes with one mounting clamp (Model CL2000B) that is compatible with all 7000 Series Field Probes. The export classification for this equipment is EAR99. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
-
UltraSeal Bar Lights are ideal for hygienic inspection environments, aseptic manufacturing, and food and beverage applications. They are IP69K certified to withstand the harshest environments.
-
High-intensity Bar Lights feature the UltraSeal standard proprietary nickel finish, providing superior corrosion resistance and improved thermal conductivity in comparison to stainless steel.
-
Fiber coupled to allow easy movement
-
Ultra-broadband measurement
-
Transmitted or reflected data collection
-
Mates with collinear adapter (AXA40n1)
-
High signal to noise ratio
-
Hot swappable with other transmitters
-
Low noise to enable rapid data collection
-
Adjustable lens tube for focusing
-
Multiple lenses available
- Support the most high-performance Camera Link cameras with available support for Full and 80-bit mode at up to 85 MHz
- Perform deterministic image acquisition by way of the jitter-free Camera Link 2.1 interface
- Maximize system compatibility with the choice of PCIe® 2.1 x1, x4 or x8 connectivity
- Eliminate missed frames with ample onboard buffering and PCIe bandwidth
- Optimize multi-camera applications via support for up to four Base or two Full/80-bit Camera Link cameras per board
- Minimize space requirements and maximize PC compatibility through a half-length design with mini Camera Link connectivity for true single-slot operation
- Improve and simplify system connectivity with Power-overCamera-Link (PoCL) support at extended cable lengths
-
Proven technology: designed in conjunction with several top STM groups in the world
-
Quiet, low vibration operation
-
Low running costs and reduced maintenance
-
Easy operation and fast cool-down; load sample when the system is cold for TL models
-
Calibrated RuO and CMN thermometry read by model 372S resistance bridge are installed on the mixing chamber plate
-
Modular
-
Control up to 95 assets
-
Control multiple AC and DC power supplies and loads in one mainframe
-
Create “virtual assets”
-
Web browser control
-
User configurable
-
Highest Power Density
-
Simple integration
-
PFC
-
Universal AC/DC input
-
Up to 6kW in one mainframe
-
1kW DC modules
-
PFC ≥0.95
-
Reduced space and logistics hassles
-
High power density
-
Handles DC and AC power and load modules
-
User configurable
-
Universal AC/DC input
-
-
Ease of integration
-
Web browser control
-
Trigger bus
-
Configure modules to parallel or series operation "on the fly"
-
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries