Amplifier Research - FM7004A - Field monitor, 0.4 - 1400 V/m, 12.0 mA/m-17 A/m. Accepts input from up to 4 isotropic field probes.
The FM7004A field monitor provides four digital interfaces (IEEE- 488, USB, RS-232, and Ethernet) and a highly readable, user configurable, LCD touch display. The monitor is menu driven and can be controlled from the front panel or remotely through any of the interfaces. The FM7004A displays up to four probe readings simultaneously, in any combination of the "E" field or "H" field 7000 series probes. Readings from each axis, plus the composite reading, are displayed simultaneously. The FM7004A recognizes each attached 7000 series probe (FL, PL, FA, FP, FH) and automatically displays the proper decimal places and units. Any faults that occur are logged and the unit is programmed to be self correcting when possible. As a software-driven instrument, firmware upgrades can be made through the USB port. The isotropic field probes have an integral optical transceiver which communicates with the field monitor through a twin fiber optic cable. The operator can select minimum, maximum or average reading from any or all selected probes thus enjoying complete flexibility in choice of signal input. Minimum and maximum hold capability has also been incorporated with local or remote controlled start and stop. The FM7004A has the ability to correct probe readings over frequency using a set of correction factors stored in its internal memory. The FM7004A allows for up to six tables of field probe correction factors to be stored. Each table of correction factors can contain up to 30 different frequency points. The tables are loaded on the FM7004A using the USB port and the Table Loader program. The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.