Amplifier Research - FL7218 - Electric Field Laser Powered Probe, 2 MHz - 18 GHz, 2 - 1000 V/m (probe and carrying case only)
-
2MHz–18GHz
-
2–1000 V/m
-
User–selectable X, Y, Z Axes
The FL7218 is a smart, fast, extremely accurate electric field probe that contains an internal microprocessor to provide linearization, temperature compensation, control, and communication functions. Noise reduction and temperature compensation allow accurate measurements down to 2 V/m without zero adjustment. Microprocessor based linearization provides a 54 dB dynamic range. When rotated about its ortho angle mount, the probe provides isotropic response of ±1.5 dB to 18 GHz.
The FL7218 is laser powered to allow for continuous operation without recharging or battery replacement. This probe requires an FI7000 for power and communication. FM7004A is recommended for local monitoring and control.
Correction factors are provided with the probe. These factors can be loaded into the Model FM7004A Field Monitor (sold separately) to automatically correct the probe readings at user-specified frequencies. When correction factors are applied, the true accuracy of the probe can be realized.
The FL7218 communicates through glass fiber optic cables, up to 100 meters long, to the FI7000 interface. X, Y, Z, and isotropic readings can be returned through an FI7000 in 20 msec.
Did you know our AR Calibration Lab is A2LA Certified?
AR’s scope of accreditations covers the calibration of models FL7030, FL7006, FL7218, FA7006, and FA7218 in accordance with the IEEE 1309:2013 standard. http://bit.ly/A2LA_AR
More Product Information
- 800 W CW, 80 - 650 MHz
- 725 W CW, 650 – 1000 MHz
- Class A design
- 100% mismatch tolerant
- Sample ports
- Built-in fault monitoring and protection
- Touch screen display
- Forward and reverse power monitoring
- VSWR monitor with user-settable limit
- Fault log
- User-settable ALC
- Remote control: Ethernet, USB, GPIB, fiber-optic serial, RS-232
- Modular design for easy maintenance and service
- Low acoustical noise
-
M1 through M3
-
800 Watts CW
-
10kHz–3MHz
-
Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
-
Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
-
-156 dBm/Hz Displayed Average Noise Level (Typ.)
-
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
-
Total Amplitude Accuracy < 1.2 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
All-Digital IF Technology
-
Standard Preamplifier
-
Distance to fault capability using VNA time domain analysis
-
Up to 1.5 GHz Tracking Generator Kit
-
Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
-
EMI Pre-compliance Test Kit (Opt.)
-
10.1 lnch WVGA (1024 x 600) Display
Amplifier Research
Founded in 1969, Amplifier Research is a world-class source for broadband high power, solid state, RF amplifiers and microwave amplifiers, TWT amplifiers, log periodic antennas and high-gain horn antennas, plus EMC test equipment, software and field probes and monitors. Throughout its 50 years (and counting), AR has been responsible for a number of “firsts” which have transformed not only EMC and RF testing but also the industries and equipment affected by these tests. A sampling of these innovations includes:
- 10,000-watt tube amplifiers,100-watt solid-state • 100-1000 MHz instantaneous bandwidth Class A amplifier
- First production 16,000-watt solid-state linear amplifier from 10 kHz to 225 MHz
- 50,000-watt Class A power amplifier up to 225 MHz
- 0.7 to 6 GHz high-power Class A & AB amplifier
Additionally, they push the limits of state-of-the-art design and have ruggedized their products to make them virtually indestructible. AR amplifiers are fully tested to the extreme to ensure customers receive a product that is built to last.
Contact Details
Amplifier Research Corporation, Ametek CTS
160 Schoolhouse Rd., Souderton, PA 18964-9990, USA
Phone: 215-723-8181
Customer Service: 215-723-0275