Test & Measurement
Download Line Card
Document
Embedded
Download Line Card
Document
Products
-
Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
-
Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
-
Reduces interference with air traffic control and nearby aircraft
-
Rugged design for ramp use
-
Fits most ‘Shark Fin’ L-Band antennas
-
Quick action antenna grip/release action
-
Supports link widths up to 16-lanes
-
Operates up to 32GTps, PCIe 5.0 data rates
-
Downward compatible with PCIe 1.0, 2.0, 3.0 and 4.0, and data rates of 2.5, 5.0, 8.0 and 16GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning effort
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supports link widths up to 16-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports error injection for deep system analysis
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Supports link widths up to and including 4-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 4-lane PCB finger connector installs into host test system’s 4-, 8- or 16-lane PCIe slot
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports clock and trigger I/O
-
Interposer power is independent of host system.
-
Power Supply, 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the PCIe Card Electro-Mechanical (CEM) specification
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Interposers: x8 and x16 Slot, x4 Flying Lead pod, x4 M.2, x4 U.2 (available in dual port), and x16 SFF-8644
-
1U+ chassis with 128GB memory (64GB upstream and 64GB downstream)
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneously Analyze and Jam on a single chassis using one interposer
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
The Tap Upstream and Downstream ports allow AJA configuration Jamming
-
Cascade up to 4 Xgig captures into a single trace view
-
Full support of LTSSM for PCI Express
-
Memory segmentation for capture of multiple traces
-
Field replaceable modular fan and power supply assemblies
-
Portable, lightweight, and stand-alone
-
One-year hardware and three-year software warranties for the Xgig 4K16 PCI Express 4.0 Protocol Analyzer/Jammer
-
16GTps, PCIe 4.0 data rate operation. Fully compatible with lower PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Link widths up to 4-lanes
-
32GB memory (16GB Up Stream and 16GB Down Stream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
Full support of LTSSM for PCI Express
-
Multicolored LEDs on the front panel specify link speed, lane width and performance
-
Field replaceable modular fan and power supply assemblies
-
Works with Interposers for CEM slots, Flying-Lead probes, U.2 (SFF-8639), M.2, SFF-8674, OCulink, EDSFF and others
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
32GTps, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16 GTps
-
Link widths to 16-lanes, including 1-, 2-, 4-, 8-lanes
-
256GB memory (128GB upstream and 128GB downstream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneous capture of multiple links is allowed with multiple simultaneous users
-
Decodes all PCIe, NVMe and CXL traffic at all layers of the stack including the TLP, DLLP, and PHY layer packets
-
Flexible trigger events include training sequences, ordered sets, queue pairs, PRPs, SGL, SMB, etc.
-
Cascade captures from up to four Xgig chassis into a single trace view
-
Full support of PCI Express LTSSM analysis
-
Field replaceable power supply
-
LEDs give quick indicators of power and link status
-
Includes one-year hardware and three-year software warranties
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Supported by a wide variety of Interposers (CEM, U.3, etc.)
-
32 GT/s, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Link widths up to 8-lanes
-
Memory segmentation for capture of multiple traces
-
Simultaneous two-link, dual port capture is allowed by multiple users
-
Host-Client connection for remote debugging using Ethernet, or local debugging using USB
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/ Gather Lists (SGL) etc.
-
Cascade up to four Xgig captures into a single trace view
-
Full support of LTSSM for analysis
-
Field replaceable modular fan and power supply assemblies
-
LED’s give quick indicators of power and status
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™