Sorensen DCS Series 1 kW, 1.2 kW and 3 kW General Purpose Programmable Power Supply

Sorensen DCS Series 1 kW, 1.2 kW and 3 kW General Purpose Programmable Power Supply

Product Overview:

  • High power density / low ripple and noise
  • High programming resolution with Ethernet interface
  • Constant voltage and current mode
  • Remote sensing
  • Isolated analog control and monitoring (optional)

 

More

The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies  utilizes unique packaging techniques to achieve continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits in a low profile chassis.,  Demonstrated  large installed base over a long period of time, the DCS family provides a highly reliable power platform.

This family has an easy-to-use front panel with 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously.  LEDs indicate overtemperature, remote programming, shutdown and over voltage protection, status and constant-voltage/current mode operation.  The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints.

The DCS family can also be controlled remotely.  Four analog control modes are standard as well as isolated analog control (option).  Computer control can be accomplished over  IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option)

 

Features And Benefits
Wide Voltage Ranges
From 0-8 VDC to 0-600 VDC; current levels from 1.7A to 350A

East Master/Slave Paralleling with Active Current Sharing

5 Year Warranty

Remote Programming

  • Selectable remote programming for voltage, current and OVP
  • 16 bit programming through LXI -compliant Ethernet LAN / RS-232C (M130)
  • 12-bit programming through IEEE-488.2 / RS-232C  (Option M9C)Isolated analog programming (Option M51)
  • Multichannel slave interface (Option M85 or M131)

Software

  • IVI-com driver for M130 option
  • Labwindows CVI driver for M9C option
  • Labview driver for M9C option

 

Common
Meter Accuracy 1% of full scale + 1 count
Max. Voltage Differential from Output to Safety Ground 150 VDC
Remote Start/Stop and Interlock TTL compatible input or 12-250 VAC (12-130 VDC) or a contact closure
Cooling Internal fan, over temperature shutdown if internal heat sink exceeds set temperature
Remote Sense The maximum allowed sense line drop is 4V per line (2V on the DCS 8/10V 1 kW/1.2 kW models and 1V/line for all 3 kW models). Line drop subtracts from the maximum available output voltage at full rated power.
Remote Programming Enabled via external jumper on rear panel connector J3
Overvoltage Protection Crowbar type adjustable from 5-110% of rated output using front panel control (local or remote program selectable via J3 jumper)
Remote Analog Programming Linearity Typical error is less an 0.5% setting.
Accuracy is 1% of rated output.
Regulatory Certified to UL/CSA 61010 and IEC/EN 61010-1 CE Compliant (LVD and EMC directive)
Input: Voltage and Frequency
Output Power 200 - 250 VAC 100 - 132 VAC 190 - 250 VAC
1kW single phase, 8A typical, 47- 63 Hz single phase, 15A typical, 47-63 Hz, internal jumper selectable  
1.2kW single phase, 9A typical, 47-63 Hz single phase, 18A typical, 47-63 Hz, internal jumper selectable  
3kW single-phase, 20A, 47- 63Hz.   three phase, 14A, 47-63Hz.
Output: Voltage and Current
1kW Model Voltage Current
DCS 8-125E 0 - 8 0 - 125
DCS 10-100E 0 - 10 0 - 100
DCS 20-50E 0 - 20 0 - 50
DCS 33-33E 0 - 33 0 - 33
DCS 40-25E 0 - 40 0 - 25
DCS 50-20E 0 - 50 0 - 20
DCS 60-18E 0 - 60 0 - 18
DCS 80-13E 0 - 80 0 - 13
DCS 100-10E 0 - 100 0 - 10
DCS 150-7E 0 - 150 0 -7
DCS 300-3.5E 0 - 300 0 - 3.5
DCS 600-1.7E 0 - 600 0 - 1.7
1.2kW Model Voltage Current
DCS 8-140E 0 - 8 0 - 140
DCS 10-120E 0 - 10 0 - 120
DCS 20-60E 0 - 20 0 - 60
DCS 33-36E 0 - 33 0 - 36
DCS 40-30E 0 - 40 0 - 30
DCS 50-24E 0 - 50 0 - 24
DCS 60-20E 0 - 60 0 - 20
DCS 80-15E 0 - 80 0 - 15
DCS 100-12E 0 - 100 0 - 12
DCS 150-8E 0 - 150 0 - 8
DCS 300-4E 0 - 300 0 - 4
3kW Model Voltage Current
DCS 8-350E 0 - 8 0 - 350
DCS 12-250E 0 - 12 0 - 250
DCS 20-150E 0 - 20 0 - 150
DCS 40-75E 0 - 40 0 - 75
DCS 55-55E 0 - 55 0 - 55
DCS 60-50E 0 - 60 0 - 50
DCS 80-37E 0 - 80 0 - 37
DCS 150-20E 0 - 150 0 - 20
Output
Voltage Resolution 0.02%
Ripple (mV rms or p-p) See table
Regulation Line For input voltage variation over the AC input voltage range, with constant rated load.
Load For 0-100% load variation, with constant nominal line voltage.
Voltage 0.1%
Current 0.1%
Transient Response Typically recovers in 500 μs (1 & 1.2 kW) or 1ms (3k W) to 1% of steady-state output voltage (within 1% of Vmax) for 70-100% or 100-70% load change.
Stability ±0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature
Efficiency See table below Temperature Coefficient: 0.02%/°C of maximum output voltage; 0.03%/°C of maximum output current. Change in output per °C change in ambient temperature, with constant line and load
Physical
Dimensions

Width: 19” (482 mm) W, Depth 17.52” (445 mm)

Height: 1 kW and 1.2 kW: 1U or 1.72” (43 mm) 3 kW: 2U or 3.46” (87 mm)

Weight & Shipping Weight
Weight 1 kW and 1.2 kW: 19 lbs. ( 8.6 kg) 
3 kW: 33 lbs. (15 kg)
Shipping Weight 1 kW and 1.2 kW: 24 lbs. (10.9 kg) 
3 kW: 42 lbs. (19 kg)
Environmental
Operating Temperature 0°C to 50°C (no derating)
Storage Temperature -55°C to 85°C
Humidity Range 0 to 80% RH, non condensing
Programming Specifications
DCS Series 1 kW Programming Accuracy M130/M131/M9C/M85 Options
Voltage 0.1% + Current 0.1% + OVP 0.5% +
DCS 8-125E 8mV 500mA 44mV
DCS 10-100E 10mV 400mA 55mV
DCS 20-50E 20mV 200mA 110mV
DCS 33-33E 33mV 132mA 182mV
DCS 40-25E 40mV 100mA 220mV
DCS 50-20E 50mV 80mA 275mV
DCS 60-18E 60mV 72mA 330mV
DCS 80-13E 80mV 52mA 440mV
DCS 100-10E 100mV 40mA 550mV
DCS 150-7E 150mV 20mA 825mV
DCS 300-3.5E 300mV 15mA 1650mV
DCS 600-1.7E 600mV 6.8mA 3300mV
DCS Series 1.2 kW Programming Accuracy M130/M131/M9C/M85 Options
Voltage 0.1% + Current 0.1% + OVP 0.5% +
DCS 8-140E 8mV 560mA 44mV
DCS 10-120E 10mV 480mA 55mV
DCS 20-60E 20mV 240mA 110mV
DCS 33-36E 23mV 144mA 182mV
DCS 40-30E 40mV 120mA 220mV
DCS 50-24E 50mV 96mA 275mV
DCS 60-20E 60mV 80mA 330mV
DCS 80-15E 80mV 60mA 440mV
DCS 100-12E 100mV 48mA 550mV
DCS 150-8E 150mV 32mA 825mV
DCS 300-4E 300mV 16mA 1650mV
DCS Series 3 kW Programming Accuracy M130/M131/M9C/M85 Options
Voltage 0.1% + Current 0.1% + OVP 0.5% +
DCS 8-350E 8mV 1400mA 44mV
DCS 12-250E 12mV 1000mA 66mV
DCS 20-150E 20mV 600mA 110mV
DCS 40-75E 40mV 300mA 220mV
DCS 55-55E 55mV 220mA 303mV
DCS 60-50E 60mV 200mA 330mV
DCS 80-37E 80mV 148mA 440mV
DCS 150-20E 150mV 80mA 825mV
Read-back Specifications
DCS Series 1 kW Readback Accuracy
Voltage 0.1% + Current 0.1% +
DCS 8-125E 12mV 500mA
DCS 10-100E 15mV 400mA
DCS 20-50E 30mV 200mA
DCS 33-33E 50mV 132mA
DCS 40-25E 60mV 100mA
DCS 50-20E 75mV 80mA
DCS 60-18E 90mV 72mA
DCS 80-13E 120mV 52mA
DCS 100-10E 150mV 40mA
DCS 150-7E 225mV 28mA
DCS 300-3.5E 450mV 14mA
DCS 600-1.7E 900mV 7mA
DCS Series 1.2 kW Readback Accuracy
Voltage 0.1% + Current 0.1% +
DCS 8-140E 12mV 560mA
DCS 10-120E 15mV 480mA
DCS 20-60E 30mV 240mA
DCS 33-36E 50mV 144mA
DCS 40-30E 60mV 120mA
DCS 50-24E 75mV 95mA
DCS 60-20E 90mV 80mA
DCS 80-15E 120mV 60mA
DCS 100-12E 150mV 48mA
DCS 150-8E 225mV 32mA
DCS 300-4E 450mV 16mA
DCS Series 3 kW Readback Accuracy
Voltage 0.1% + Current 0.1% +
DCS 8-350E 12mV 1400mA
DCS 12-250E 18mV 1000mA
DCS 20-150E 30mV 600mA
DCS 40-75E 60mV 300mA
DCS 55-55E 83mV 220mA
DCS 60-50E 90mV 200mA
DCS 80-37E 120mV 148mA
DCS 150-20E 225mV 80mA
Output
DCS Series 1 kW Output Power
Voltage VDC Current ADC @ 50°C
DCS 8-125E 0-8 0-125
DCS 10-100E 0-10 0-100
DCS 20-50E 0-20 0-50
DCS 33-33E 0-33 0-33
DCS 40-25E 0-40 0-25
DCS 50-20E 0-50 0-20
DCS 60-18E 0-60 0-18
DCS 80-13E 0-80 0-13
DCS 100-10E 0-100 0-10
DCS 150-7E 0-150 0-7
DCS 300-3.5E 0-300 0-3.5
DCS 600-1.7E 0-600 0-1.7
DCS Series 1.2 kW Output Power
Voltage VDC Current ADC @ 50°C
DCS 8-140E 0-8 0-140
DCS 10-120E 0-10 0-120
DCS 20-60E 0-20 0-60
DCS 33-36E 0-33 0-36
DCS 40-30E 0-40 0-30
DCS 50-24E 0-50 0-24
DCS 60-20E 0-60 0-20
DCS 80-15E 0-80 0-15
DCS 100-12E 0-100 0-12
DCS 150-8E 0-150 0-8
DCS 300-4E 0-300 0-4
DCS Series 3 kW Output Power
Voltage VDC Current ADC @ 50°C
DCS 8-350E 0-8 0-350
DCS 12-250E 0-12 0-250
DCS 20-150E 0-20 0-150
DCS 40-75E 0-40 0-75
DCS 55-55E 0-55 0-55
DCS 60-50E 0-60 0-50
DCS 80-37E 0-80 0-37
DCS 150-20E 0-150 0-20
Output
DCS Series 1 kW Constant Voltage Mode*
Ripple** (rms) mV Noise** (p-p) mV Transient Response
time μs (typ)
DCS 8-125E 4 60 500
DCS 10-100E 4 60 500
DCS 20-50E 4 60 500
DCS 33-33E 4 60 500
DCS 40-25E 4 60 500
DCS 50-20E 4 60 500
DCS 60-18E 4 60 500
DCS 80-13E 4 60 500
DCS 100-10E 4 60 500
DCS 150-7E 12 160 500
DCS 300-3.5E 20 200 500
DCS 600-1.7E 50 300 500
DCS Series 1.2 kW Constant Voltage Mode*
Ripple (rms) ** mV Noise (p-p) mV Transient Response
time μs (typ)
DCS 8-140E 5 60 500
DCS 10-120E 55 60 500
DCS 20-60E 5 60 500
DCS 33-36E 5 60 500
DCS 40-30E 5 60 500
DCS 50-24E 5 60 500
DCS 60-20E 5 60 500
DCS 80-15E 5 60 500
DCS 100-12E 10 60 500
DCS 150-8E 15 160 500
DCS 300-4E 25 200 500
DCS Series 3 kW Constant Voltage Mode*
Ripple (rms) ** mV Noise (p-p) mV Transient Response
time μs (typ)
DCS 8-350E 15 100 1000
DCS 12-250E 10 100 1000
DCS 20-150E 10 100 1000
DCS 40-75E 20 100 1000
DCS 55-55E 20 100 1000
DCS 60-50E 20 100 1000
DCS 80-37E 20 100 1000
DCS 150-20E 30 200 1000
* Typical resolution is 0.02% ** Typical P-P noise and ripple (20Hz to 300kHz)
Output
DCS Series 1 kW Combined Regulation Line and Load % Temp Coeff. Voltage % Voltage Drift 
% Vmax (typ)
DCS 8-125E 0.2 0.02 0.05
DCS 10-100E 0.2 0.02 0.05
DCS 20-50E 0.2 0.02 0.05
DCS 33-33E 0.2 0.02 0.05
DCS 40-25E 0.2 0.02 0.05
DCS 50-20E 0.2 0.02 0.05
DCS 60-18E 0.2 0.02 0.05
DCS 80-13E 0.2 0.02 0.05
DCS 100-10E 0.2 0.02 0.05
DCS 150-7E 0.2 0.02 0.05
DCS 300-3.5E 0.2 0.02 0.05
DCS 600-1.7E 0.2 0.02 0.05
DCS Series 1.2 kW
Combined Regulation Line and Load % Temp Coeff. Voltage % Voltage Drift 
% Vmax (typ)
DCS 8-140E 0.2 0.02 0.05
DCS 10-120E 0.2 0.02 0.05
DCS 20-60E 0.2 0.02 0.05
DCS 33-36E 0.2 0.02 0.05
DCS 40-30E 0.2 0.02 0.05
DCS 50-24E 0.2 0.02 0.05
DCS 60-20E 0.2 0.02 0.05
DCS 80-15E 0.2 0.02 0.05
DCS 100-12E 0.2 0.02 0.05
DCS 150-8E 0.2 0.02 0.05
DCS 300-4E 0.2 0.02 0.05
DCS Series 3 kW
Combined Regulation Line and Load % Temp Coeff. Voltage % Voltage Drift 
% Vmax (typ)
DCS 8-350E 0.2 0.02 0.05
DCS 12-250E 0.2 0.02 0.05
DCS 20-150E 0.2 0.02 0.05
DCS 40-75E 0.2 0.02 0.05
DCS 55-55E 0.2 0.02 0.05
DCS 60-50E 0.2 0.02 0.05
DCS 80-37E 0.2 0.02 0.05
DCS 150-20E 0.2 0.02 0.05
Output
DCS Series 1 kW Programming Constraints Voltage Mode
Ohms / V

V / V

DCS 8-125E 625 0-10V = 0-100% V, or 0-5V = 0-100% V
DCS 10-100E 500
DCS 20-50E 250
DCS 33-33E 151.5
DCS 40-25E 125
DCS 50-20E 100
DCS 60-18E 83
DCS 80-13E 62.5
DCS 100-10E 50
DCS 150-7E 33.3
DCS 300-3.5E 16.67
DCS 600-1.7E 8.33
DCS Series 1.2 kW Programming Constraints Voltage Mode
Ohms / V

V / V

DCS 8-140E 625 0-10V = 0-100% V, or 0-5V = 0-100% V
DCS 10-120E 500
DCS 20-60E 250
DCS 33-36E 151.5
DCS 40-30E 125
DCS 50-24E 100
DCS 60-20E 83
DCS 80-15E 62.5
DCS 100-12E 50
DCS 150-8E 33.3
DCS 300-4E 16.67
DCS Series 3 kW Programming Constraints Voltage Mode
Ohms / V

V / V

DCS 8-350E 625 0-10V = 0-100% V, or 0-5V = 0-100% V
DCS 12-250E 416.7
DCS 20-150E 250
DCS 40-75E 125
DCS 55-55E 90.9
DCS 60-50E 83
DCS 80-37E 62.5
DCS 150-20E 33.3
Output
DCS Series 1 kW Constant Current Mode*
Regulation line and load % combined

Ripple (rms)** mA

DCS 8-125E 0.2 160
DCS 10-100E 0.2 128
DCS 20-50E 0.2 25
DCS 33-33E 0.2 10
DCS 40-25E 0.2 7
DCS 50-20E 0.2 7
DCS 60-18E 0.2 6
DCS 80-13E 0.2 4
DCS 100-10E 0.2 3
DCS 150-7E 0.2 2
DCS 300-3.5E 0.2 1
DCS 600-1.7E 0.2 1
DCS Series 1.2 kW Constant Current Mode*
Regulation line and load % combined

Ripple (rms)** mA

DCS 8-140E 0.2 180
DCS 10-120E 0.2 153
DCS 20-60E 0.2 30
DCS 33-36E 0.2 11
DCS 40-30E 0.2 9
DCS 50-24E 0.2 8.5
DCS 60-20E 0.2 6.6
DCS 80-15E 0.2 6
DCS 100-12E 0.2 3.6
DCS 150-8E 0.2 2.3
DCS 300-4E 0.2 1.2
DCS Series 3 kW Constant Current Mode*
Regulation line and load % combined

Ripple (rms)** mA

DCS 8-350E 0.2  
DCS 12-250E 0.2  
DCS 20-150E 0.2  
DCS 40-75E 0.2  
DCS 55-55E 0.2  
DCS 60-50E 0.2  
DCS 80-37E 0.2  
DCS 150-20E 0.2  
Output
DCS Series 1 kW
Temp. Coeff. % °C (typ)

Current Drift %| out Max (typ.)

DCS 8-125E 0.03 0.05
DCS 10-100E 0.03 0.05
DCS 20-50E 0.03 0.05
DCS 33-33E 0.03 0.05
DCS 40-25E 0.03 0.05
DCS 50-20E 0.03 0.05
DCS 60-18E 0.03 0.05
DCS 80-13E 0.03 0.05
DCS 100-10E 0.03 0.05
DCS 150-7E 0.03 0.05
DCS 300-3.5E 0.03 0.05
DCS 600-1.7E 0.03 0.05
DCS Series 1.2 kW
Temp. Coeff. % °C (typ)

Current Drift %| out Max (typ.)

DCS 8-140E 0.03 0.05
DCS 10-120E 0.03 0.05
DCS 20-60E 0.03 0.05
DCS 33-36E 0.03 0.05
DCS 40-30E 0.03 0.05
DCS 50-24E 0.03 0.05
DCS 60-20E 0.03 0.05
DCS 80-15E 0.03 0.05
DCS 100-12E 0.03 0.05
DCS 150-8E 0.03 0.05
DCS 300-4E 0.03 0.05
DCS Series 3 kW
Temp. Coeff. % °C (typ)

Current Drift %| out Max (typ.)

DCS 8-350E 0.03 0.05
DCS 12-250E 0.03 0.05
DCS 20-150E 0.03 0.05
DCS 40-75E 0.03 0.05
DCS 55-55E 0.03 0.05
DCS 60-50E 0.03 0.05
DCS 80-37E 0.03 0.05
DCS 150-20E 0.03 0.05
Output
DCS Series 1 kW Programming Constants, Current Mode
Ohms/A

V/A

DCS 8-125E 40 0-10V = 0-100% |a or 0-5V = 0-100% |a
DCS 10-100E 50
DCS 20-50E 100
DCS 33-33E 151.5
DCS 40-25E 200
DCS 50-20E 250
DCS 60-18E 277.8
DCS 80-13E 384.6
DCS 100-10E 500
DCS 150-7E 714.3
DCS 300-3.5E 1428.6
DCS 600-1.7E 2941.2
DCS Series 1.2 kW Programming Constants, Current Mode
Ohms/A

V/A

DCS 8-140E 35.7 0-10V = 0-100% |a or 0-5V = 0-100% |a
DCS 10-120E 41.7
DCS 20-60E 83.3
DCS 33-36E 138.9
DCS 40-30E 166.7
DCS 50-24E 208.3
DCS 60-20E 250.0
DCS 80-15E 333.3
DCS 100-12E 416.7
DCS 150-8E 625.0
DCS 300-4E 1250.0
DCS Series 3 kW Programming Constants, Current Mode
Ohms/A

V/A

DCS 8-350E   0-10V = 0-100% |a or 0-5V = 0-100% |a
DCS 12-250E  
DCS 20-150E  
DCS 40-75E  
DCS 55-55E  
DCS 60-50E  
DCS 80-37E  
DCS 150-20E  
Output
DCS Series 1 kW Input Current, A Nominal Efficiency % (Typ.)
230V Single Phase 208V Three Phase
DCS 8-125E 8 N/A 82
DCS 10-100E 8 N/A 82
DCS 20-50E 8 N/A 82
DCS 33-33E 8 N/A 84
DCS 40-25E 8 N/A 84
DCS 50-20E 8 N/A 84
DCS 60-18E 8 N/A 86
DCS 80-13E 8 N/A 86
DCS 100-10E 8 N/A 86
DCS 150-7E 8 N/A 86
DCS 300-3.5E 8 N/A 86
DCS 600-1.7E 9.5 N/A 86
DCS Series 1.2 kW
Input Current, A Nominal Efficiency % (Typ.)
230V Single Phase 208V Three Phase
DCS 8-140E 9 N/A 82
DCS 10-120E 9 N/A 82
DCS 20-60E 9 N/A 82
DCS 33-36E 9 N/A 84
DCS 40-30E 9 N/A 84
DCS 50-24E 9 N/A 84
DCS 60-20E 9 N/A 85
DCS 80-15E 9 N/A 85
DCS 100-12E 9 N/A 85
DCS 150-8E 9 N/A 85
DCS 300-4E 9 N/A 85
DCS Series 3 kW
Input Current, A Nominal Efficiency % (Typ.)
230V Single Phase 208V Three Phase
DCS 8-350E 24 13 82
DCS 12-250E 26 14 82
DCS 20-150E 26 14 82
DCS 40-75E 26 14 86
DCS 55-55E 26 14 82
DCS 60-50E 26 14 86
DCS 80-37E 26 14 86
DCS 150-20E 26 14 86
* Typical resolution is 0.02% ** rms ripple typical from 20 Hz to 300 kHz
J3 Connector
1 90-250 VAC Remote Shutdown 14 TTL Shutdown
2 Shutdown Return 15 +12 VDC
3 OVP Program 16 1 mACurrent Source (OVP)
4 Remote/Local Status Indicator 17 OVP Indicator
5 Mode Status Indicator 18 Thermal S/DN Status
6 Ground 19 0-5V Voltage Monitor
7 0-5V Current Monitor 20 Remote Voltage Select
8 Voltage Control 21 1 mA Current Source (V)
9 Voltage Program Input 22 1 mA Current Source (I)
10 Current Program Unit 23 1 mA Current Source (I)
11 Current Control 24 Return
12 Return Sense 25 POS Output (8-100V Models Only)
13 POS Sense (8-100V Models Only)  
 

 

 

Manuals
  1kW 1.2kW 3kW
Operations Manual rev H 05-04-15 (1.7Mb) 05-04-15 (1.7Mb) 2-5-09 (889Kb)
M9 Option Manual rev N 1/24/14 (589Kb) 1/24/14 (589Kb) 1/24/14 (589Kb)
M51A Isolated Analog 
Option Manual Rev C
2/20/14 (803Kb) 2/20/14 (803Kb) 2/20/14 (803Kb)
M130/131 Ethernet Option Manual 2/12/09 (2.2Mb) 2/12/09 (2.2Mb) 2/12/09(2.2Mb)
M133/M135/M136 Disconnect Polarity Relay Option and M9/M130 Remote Programming 3/27/15 (458Kb) 3/27/15 (458Kb)  
 
 
Technical Notes
DLM/DCS/SGA/SGI SRQ Generation 10-21-2008 (74Kb)
Support Documents
DCS 1K FAQs 01-05-2010 (696Kb)
DCS 3K FAQs 01-05-2010 (449Kb)
Software
  1kW 1.2kW 3kW
LabWindows/CVI Driver ¹ 25Kb 25Kb 25Kb
LabVIEW² V5.X - V7.X 637Kb 637Kb 637Kb
LabVIEW 2009 V1.0.0.1 12/10 (952kb) 12/10 (952kb) 12/10 (952kb)
M9 GUI ³ 1732Kb 1732Kb 1732Kb
Sorensen Labview Driver V1.0
Windows 32 bit for Labview 2012
06/04/2014_(164Mb)
**Install corresponding IVI driver first**
Sorensen Labview Driver V1.0
Windows 32 bit for Labview 2013
06/04/2014_(153Mb)
**Install corresponding IVI driver first**
Sorensen Labview Driver V1.0
Windows 64 bit for Labview 2012
06/04/2014 (145Mb)
**Install corresponding IVI driver first**
Sorensen Labview Driver V1.0
Windows 64 bit for Labview 2013
06/04/2014 (141Mb)
**Install corresponding IVI driver first**
IVI-COM w/IVI-C wrapper 
(ethernet or RS-232 or GPIB) V2.0.1132-bit
06/04/2014 (2.9Mb)
IVI-COM w/IVI-C wrapper 
(ethernet or RS-232 or GPIB) V2.0.1164-bit
06/04/2014 (3.4Mb)
M130 GUI ³ 2/11/10 3.2MB 2/11/10 3.2MB 2/11/10 3.2MB
DLM_DCS M130 Ethernet FLash Upgrade Utility V1.0
**Only Compatible with M130 option, not M131 option**
05/08/15 (693Kb)
DLM_DCS Master Firmware V2.10   NOTE: Use with DLM_DCS M130 Ethernet Flash Upgrade Utility V1.0 05/08/15 (646Kb)
DCS GPIB Flash Updater V1.0 (4360738V1.0) 11/03/2014 (408Kb)

¹ Requires LabWindows ver 6.0 or newer 
² Requires LabVIEW ver 5.01 or newer  (LabVIEW Information at NI.com
³ Requires National Instrument's VISA RTE 
ª Requires IVI Shared Components 
  Java Runtime Drivers click here

Utility
LXI Discovery Browser
MD5 Checksum: 1b1f3710e3fa02fde7ecc5f4e9731216
03/10/2011 (11.8MB) V1.0.0.9